Metabolic studies of methenolone acetate in horses

Methenolone acetate (17β-acetoxy-1-methyl-5α-androst-1-en-3-one), a synthetic anabolic steroid, is frequently abused in human sports. It is preferred for its therapeutic efficiency and lower hepatic toxicity compared with its 17α-alkylated analogs. As with other anabolic steroids, methenolone acetate may be used to enhance performance in racehorses. Metabolic studies on methenolone acetate have been reported for humans, whereas little is known about its metabolic fate in horses. This paper describes the investigation of in vitro and in vivo metabolism of methenolone acetate in racehorses.Studies on the in vitro biotransformation of methenolone acetate with horse liver microsomes were carried out. Methenolone (M1, 1-methyl-5α-androst-1-en-17β-ol-3-one) and seven other metabolites (M2-M8) were detected in vitro. They were 1-methyl-5α-androst-1-ene-3,17-dione (M2), 1-methyl-5α-androst-1-en-6-ol-3,17-dione (M3) and two stereoisomers of 1-methylen-5α-androstan-2-ol-3,17-dione (M4 and M5), 1-methyl-5α-androst-1-en-16-ol-3,17-dione (M6) and monohydroxylated 1-methyl-5α-androst-1-en-17-ol-3-one (M7 and M8). After oral administration of Primobolan^® (80 tablets × 5 mg of methenolone acetate each) to two thoroughbred geldings, the parent steroid ester was not detected in the post-administration urine samples. However, seven metabolites, namely M1, M6-M8, two stereoisomers of M7 (M9 and M10) and 1-methyl-5α-androst-1-en-17α-ol-3-one (M11), could be detected. The metabolic pathway for methenolone acetate is postulated. This study has shown that metabolite M1 could be targeted for controlling the abuse of methenolone acetate in horses.     

Oxidation-Induced Structural Alterations and Its Effect on Chaperone Function of Rat Lens α-Crystallin

An ascorbate-FeCl₃-EDTA-H₂O₂ system was used to oxidize rat lens α-crystallins. Under this oxidative insult, the chaperone activity of α-crystallin toward γ-crystallin was shown to decrease significantly, which is quite different from the result reported by Wang and Spector. (Invest. Ophthalmol. Vis. Sci. 1995 , 36, 311-321.) Fluorescence spectroscopy and circular dichroism were employed to characterize the structural changes of oxidized α-crystallin. It was found that fluorescence intensity of l-anilinonaphthalene-8-sul-phonate (ANS) bound to oxidized α-crystallin increased comparing to that bound to normal α-crystallin, suggesting oxidation causes the exposure of more hydrophobic regions. Further, α-crystallin's fluorescence intensity in response to tryptophan residues showed a pseudo first order decline. Amino acid analysis of normal versus oxidized α-crystallin confirmed actual decline in tryptophan levels, showing about 80% of tryptophan being modified after 10-hour oxidation. Circular dichroism showed both changes in the secondary and tertiary structures of oxidized α-crystallin, characterized by a large loss of aromatic-type amino acid interactions and a large loss of β-sheet structure. In conclusion, modified tryptophan, secondary and tertiary structural changes of α-crystallin correlate best with the reduction of chaperone function, the curves all showing a linear slope for 10 hours, then plateauing. These results indicate that the decrease of α-crystallin chaperone activity is attributed to the structural changes.     

Relaxation processes in semidilute solutions of polymers in liquid crystal solvents

We investigate the relaxation phenomena in a polymer (polystyrene)/liquid crystal (4-cyano-4'-n-octyl-biphenyl) system, in its homogeneous isotropic phase near the isotropic-isotropic, isotropic-nematic, and isotropic-smectic coexistence curve, using both polarized and depolarized photon correlation spectroscopy (PCS). We study this system for different polystyrene molecular weights (4750, 12 500, and 65 000 g/mol), different compositions (50, 40, 30, and 10% polystyrene (PS) by weight), and different temperatures close to phase boundaries. First of all, we determine the phase diagrams of this system for the different molecular weights. The shape of the phase diagrams strongly depends on the molecular weight. However, in all cases, at low temperatures, these systems separate into an almost pure liquid crystalline (LC) phase and polystyrene-rich phase. PCS measurements show that the relaxation processes in the homogeneous phase are not affected by the proximity of the nematic, or smectic, boundaries (even at a temperature of 0.1 degrees C above the phase separation in two phases). In polarized PCS experiments, we always see three relaxation processes well separated in time: one, very fast, with a relaxation time of the order of 10(-5) s; a second one with a relaxation time within the range 10(-2)-10(-3) s; and a last one, very slow, with a relaxation time of the order of 1 s. Both the fast and slow modes are independent of the wave vector magnitude, while the intermediate relaxation process is diffusive. In depolarized PCS experiments, the intermediate mode disappears and only the fast and slow relaxation processes remain, and they are independent of the magnitude of the wave vector. The diffusive mode is the classical diffusive mode, which is associated with the diffusion of polymer chains in all polymer solutions. The fast mode is due to the rotational diffusion of 4-cyano-4'-n-octyl-biphenyl (8CB) molecules close to polystyrene chains (transient network). Finally, we assign the slowest mode to reorientational processes of small aggregates of PS chains that are not dissolved in 8CB.     

Synthesis, characterisation, crystal structures, reactivity, and electrochemistry of ruthenium-nitrido, ruthenium-cobalt-imido and ruthenapyrrolidone carbonyl clusters containing alkyne ligands

Thermolysis of [Ru3(CO)9(mu3-NOMe)(mu3-eta2-PhC2Ph)] (1) with two equivalents of [Cp*Co(CO)2] in THF afforded four new clusters, brown [Ru5(CO)8(mu-CO)3(eta5-C5Me5)(mu5-N)(mu4-eta2-PhC2Ph)] (2), green [Ru3Co2(CO)7(mu3-CO)(eta5-C5Me5)2(mu3-NH)[mu4-eta8-C6H4-C(H)C(Ph)]] (3), orange [Ru3(CO)7(mu-eta6-C5Me4CH2)[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (4) and pale yellow [Ru2(CO)6[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (5). Cluster 2 is a pentaruthenium mu5-nitrido complex, in which the five metal atoms are arranged in a novel "spiked" square-planar metal skeleton with a quadruply bridging alkyne ligand. The mu5-nitrido N atom exhibits an unusually low frequency chemical shift in its 15N NMR spectrum. Cluster 3 contains a triangular Ru2Co-imido moiety linked to a ruthenium-cobaltocene through the mu4-eta8-C6H4C(H)C(Ph) ligand. Clusters 4 and 5 are both metallapyrrolidone complexes, in which interaction of diphenylacetylene with CO and the NOMe nitrene moiety were observed. In 4, one methyl group of the Cp* ring is activated and interacts with a ruthenium atom. The "distorted" Ru3Co butterfly nitrido complex [Ru3Co(CO)5(eta5-C5Me5)(mu4-N)(mu3-eta2-PhC2Ph)(mu-I)2I] (6) was isolated from the reaction of 1 with [Cp*Co(CO)I2] heated under reflux in THF, in which a Ru-Ru wing edge is missing. Two bridging and one terminal iodides were found to be placed along the two Ru-Ru wing edges and at a hinge Ru atom, respectively. The redox properties of the selected compounds in this study were investigated by using cyclic voltammetry and controlled potential coulometry. 15N magnetic resonance spectroscopy studies were also performed on these clusters.     

Self‐Assembly,Spectroscopic and Electrochemical Studies of Nickel(II)‐4,8‐Diazaundecanediamide Complex

The self‐assembly of NiCl₂·6H₂O with a diaminodiamide ligand 4,8‐diazaundecanediamide (L‐2,3,2) gave a [Ni(C₉H₂₀N₄O₂)(Cl)(H₂O)] Cl·2H₂O ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction analysis. Structural data for 1 indicate that the Ni(II) is coordinated to two tertiary N atoms, two O atoms, one water and one chloride in a distorted octahedral geometry. Crystal data for 1: orthorhombic, space group P 21nb, a = 9.5796(3) Å, b = 12.3463(4) Å, c = 14.6305(5) Å, Z = 4. Through NH···Cl–Ni (H···Cl 2.42 Å, N···Cl 3.24 Å, NH···Cl 158°) and OH···Cl–Ni contacts (H···Cl 2.36 Å, O···Cl 3.08 Å, OH···Cl 143°), each cationic moiety [Ni(C₉H₂₀N₄O₂) (Cl)(H₂O)]⁺ in 1 is linked to neighboring ones, producing a charged hydrogen‐bonded 1D chainlike structure. Thermogrametric analysis of compound 1 is consistent with the crystallographic observations. The electronic absorption spectrum of Ni(L‐2,3,2)²⁺ in aqueous solution shows four absorption bands, which are assigned to the ³A_2g → ³T_2g, ³T_2g → ¹Eg, ³T_2g → ³T_1g, and ³A_2g → ³T_1g transitions of triplet‐ground state, distorted octahedral nickel(II) complex. The cyclic volammetric measurement shows that Ni²⁺ is more easily reduced than Ni(L‐2,3,2)²⁺ in aqueous solution.     

Free Radical Reaction between 1,6-Dienes and P-Toluenesulfonyl Cyanlde

A sulfonyl-radical-induced addition-cyclization reaction of 1,6-dienes with p-toluenesulfonyl cyanide giving functionalized cyclopentane systems is described.     

Assessment of various carbon sources and nutrient feeding strategies for Panax ginseng cell culture

Ginseng (root of Panax ginseng C. A. Meyer) cells were cultivated on medium supplemented with various carbohydrates including sucrose, glucose, and fructose, at initial concentrations ranging from 10 to 110 g/L. Sucrose was shown to be the superior carbon source to the monosaccharides for ginseng cell growth and the optimal concentration was between 30 and 50 g/L. An increase in the initial concentration within this range increased the maximum cell density and growth index significantly, whereas much higher concentrations inhibited cell growth. Feeding of sucrose and some other medium components during the growth (fed-batch mode) was more effective in enhancing the cell growth and biomass productivity, increasing the growth index by more than 60–70% and biomass productivity by more than 50%.     

Highly efficient Pd-catalyzed carbonylative cross-coupling reactions with tetraorganoindates

Tetraorganoindates, which were prepared easily from the reaction of 1 equiv of InCl(3) with 4 equiv of organometallics, could be employed as effective nucleophilic cross-coupling partners in Pd-catalyzed carbonylative cross-coupling reactions with a variety of organic electrophiles. The present method gave unsymmetrical ketones and 1,4-diacylbenzenes in good yields with highly efficient transfer of almost all the organic groups attached to the indium under a carbon monoxide atmosphere in THF at 60 degrees C.     

Carbolithiation of aromatic rings: cyclohexadienes from N-aroyl-2,2,6,6-tetramethylpiperidines

Benzamides whose nitrogen atom is part of a 2,2,6,6-tetramethylpiperidine ring are dearomatised by alkyllithiums, which attack them regioselectively to yield, after electrophilic quench, substituted cyclohexadienes.     

Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.