Analytical method for the accurate determination of tricothecenes in grains using LC-MS/MS: a comparison between MRM transition and MS3 quantitation

The current food crisis demands unambiguous determination of mycotoxin contamination in staple foods to achieve safer food for consumption. This paper describes the first accurate LC-MS/MS method developed to analyze tricothecenes in grains by applying multiple reaction monitoring (MRM) transition and MS(3) quantitation strategies in tandem. The tricothecenes are nivalenol, deoxynivalenol, deoxynivalenol-3-glucoside, fusarenon X, 3-acetyl-deoxynivalenol, 15-acetyldeoxynivalenol, diacetoxyscirpenol, and HT-2 and T-2 toxins. Acetic acid and ammonium acetate were used to convert the analytes into their respective acetate adducts and ammonium adducts under negative and positive MS polarity conditions, respectively. The mycotoxins were separated by reversed-phase LC in a 13.5-min run, ionized using electrospray ionization, and detected by tandem mass spectrometry. Analyte-specific mass-to-charge (m/z) ratios were used to perform quantitation under MRM transition and MS(3) (linear ion trap) modes. Three experiments were made for each quantitation mode and matrix in batches over 6 days for recovery studies. The matrix effect was investigated at concentration levels of 20, 40, 80, 120, 160, and 200 μg kg(-1) (n = 3) in 5 g corn flour and rice flour. Extraction with acetonitrile provided a good overall recovery range of 90-108% (n = 3) at three levels of spiking concentration of 40, 80, and 120 μg kg(-1). A quantitation limit of 2-6 μg kg(-1) was achieved by applying an MRM transition quantitation strategy. Under MS(3) mode, a quantitation limit of 4-10 μg kg(-1) was achieved. Relative standard deviations of 2-10% and 2-11% were reported for MRM transition and MS(3) quantitation, respectively. The successful utilization of MS(3) enabled accurate analyte fragmentation pattern matching and its quantitation, leading to the development of analytical methods in fields that demand both analyte specificity and fragmentation fingerprint-matching capabilities that are unavailable under MRM transition.     

Carbon-boron bond cross-coupling reaction catalyzed by -PPh(2) containing palladium-indolylphosphine complexes

This study describes the application of indolylphosphine ligands with a diphenylphosphino moiety to the palladium-catalyzed borylation of aryl chlorides. The combination of palladium metal precursor with PPh(2)-Andole-phos, which comprises an inexpensive -PPh(2) group, provides highly effective catalysts for the borylation of aryl chlorides. A range of functional groups such as -CN, -NO(2), -CHO, -COMe, -COOMe, and -CF(3) was compatible, and the catalyst loading down to 0.025 mol % of Pd can be achieved. The Pd/PPh(2)-Andole-phos system is able to catalyze both borylation reaction and Suzuki-Miyaura coupling reaction in a one-pot sequential manner for the direct synthesis of biaryl compounds in excellent yields.     

Simultaneous separation of nine surfactants of various types by HPLC with evaporative light scattering detection

A simultaneous separation of cationic, amphoteric and nonioinc nine surfactants (DMDS, DMDP, DMDM, DMDL, BZC, CDE, A/O, SUNC, IMD) has been performed by a reverse phase-HPLC method utilizing a single J'sphere ODS (250 mm × 4.6 mm, 4 μm) column and a methanol-water containing 0.2% TFA eluent system within 60 min. The observed precision in determination of concentration was less than 5% R.S.D., which revealed that ELSD was an effective tool to detect the various studied surfactants of low volatility without chromophore. In addition, the detection limits were in the concentration range of 3.5-10 μg/mL, and the calibration curves, i.e. the log-log plots, were linear in the working range of 5-4600 μg/mL with the slopes of 1.321-1.668. The application of the analytical procedure to three household products without pretreatment supported that the presented chromatographic method was simple to be practical for a routine analysis of commercial products.     

Caveolin-1 upregulation in senescent neurons alters amyloid precursor protein processing

Lipid rafts provide a platform for regulating cellular functions and participate in the pathogenesis of several diseases. However, the role of caveolin-1 in this process has not been elucidated definitely in neuron. Thus, this study was performed to examine whether caveolin-1 can regulate amyloid precursor protein (APP) processing in neuronal cells and to identify the molecular mechanisms involved in this regulation. Caveolin-1 is up-regulated in all parts of old rat brain, namely hippocampus, cerebral cortex and in elderly human cerebral cortex. Moreover, detergent-insoluble glycolipid (DIG) fractions indicated that caveolin-1 was co-localized with APP in caveolae-like structures. In DIG fractions, beta APP secretion was up-regulated by caveolin-1 over- expression, which was modulated via protein kinase C (PKC) in neuroblastoma cells. From these results we conclude that caveolin-1 is selectively expressed in senescent neurons and that it induces the processing of APP by beta-secretase via PKC downregulation.     

Electrochemical STM observation of new structures of CO adsorbed on a Pt(111) electrode surface

Presented are two newly observed adstructures of adsorbed CO onto Pt(111), (2 x 2)-3CO-beta and (2 x 2)-4CO, observed during the structural evolution from the well-known (2 x 2)-3CO-alpha structure to the (square root 19 x square root 19)-13CO structure.     

o-Phenylene-bridged Cp/sulfonamido titanium complexes for ethylene/1-octene copolymerization

The Suzuki-coupling reaction of 2-(dihydroxyboryl)-3,4-dimethyl-2-cyclopenten-1-one and 2-(dihydroxyboryl)-3-methyl-2-cyclopenten-1-one with 2-bromoaniline derivatives affords cyclopentenone compounds from which cyclopentadiene compounds, 4,6-R'(2)-2-(2,5-Me2C5H3)C6H2NH2 and 4,6-R'(2)-2-(2,3,5-Me3C5H2)C6H2NH2 are prepared. After sulfonation of the -NH2 group with p-TsCl, metallation is carried out by successive addition of Ti(NMe2)4 and Me2SiCl2 affording o-phenylene-bridged Cp/sulfonamido titanium dichloride complexes, [4,6-R'(2)-2-(2,5-Me2C5H2)C6H2NSO2C6H4CH3)]TiCl2 (R'=H, ; R'=Me, ; R'=F, ) and [4,6-R'(2)-2-(2,3,5-Me3C5H)C6H2NSO2C6H4CH3)]TiCl2 (R'=H, ; R'=Me, ; R'=F, ). The molecular structures of and [2-(2,5-Me2C5H2)C6H4NSO2C6H4CH3)]Ti(NMe2)2 are determined by X-ray crystallography. The Cp(centroid)-Ti-N angle in is smaller (100.90 degrees) than that observed for the CGC (constrained-geometry catalyst), [Me2Si(eta5-Me4Cp)(NtBu)]TiCl2 (107.6 degrees) indicating a more "constrained feature" in than in the CGC. Complex shows the highest activity among the newly prepared complexes in ethylene/1-octene copolymerization but it is slightly inferior to the CGC in terms of activity, comonomer-incorporation ability, and molecular weight of the obtained polymers.     

Adlayers of Sb irreversibly adsorbed on Pt(111): an electrochemical scanning tunneling microscopy study

This work presents an electrochemical scanning tunneling microscopy study of Sb irreversibly adsorbed on Pt(111) at various potentials. At an open circuit potential (0.46 V vs a Ag/AgCl electrode), well-ordered structures of SbO+ were found: four (4 x 3)-3SbO+ structures and one (2 square root(3) x 2 square root(3))R30 degrees-3SbO+ structure. In addition, several unidentifiable transient structures of SbO+ were observed, and their relations to the well-ordered structures of (4 x 3) and (2 square root(3) x 2 square root(3))R30 degrees, regarding structural evolution, were proposed. At a reducing potential (0 V), the Pt(111) surface was covered with irreversibly adsorbed Sb which consisted of three different domains: protruded domain, domain of uniaxially incommensurate (square root(3) x square root(2))-Sb, and domain of bare (1 x 1) Pt(111). During oxidation of elemental Sb at 0.30 V, the Sb domains of the (square root(3) x square root(2)) structure were oxidized, while the protruded domains were not oxidized. After underpotential deposition of additional Sb onto the Pt(111) covered with irreversibly adsorbed Sb, the whole surface was filled with the Sb domains where each Sb atoms were separated by the square root(2a) distance (a = one Pt-Pt distance, 0.277 nm). The observed electrochemical inactivity below 0.3 V was discussed in terms of the protruded domain of a presumable incommensurate (square root(2) x square root(2)) structure.     

Amphiphilic poly(phenyleneethynylene)s can mimic antimicrobial peptide membrane disordering effect by membrane insertion

Antimicrobial peptides (AMPs) are a class of peptides that are innate to various organisms and function as a defense agent against harmful microorganisms by means of membrane disordering. Characteristic chemical and structural properties of AMPs allow selective interaction and subsequent disruption of invaders' cell membranes. Polymers based on m-phenylene ethynylenes (mPE) were designed and synthesized to mimic the amphiphilic, cationic, and rigid structure of AMPs and were found to be good mimics of AMPs in terms of their high potency toward microbes and low hemolytic activities. Using a Langmuir monolayer insertion assay, two mPEs are found to readily insert into anionic model bacterial membranes but to differ in the degree of selectivity between bacterial and mammalian erythrocyte model membranes. Comparison of grazing incidence X-ray diffraction (GIXD) data before and after the insertion of mPE clearly indicates that the insertion of mPE disrupts lipid packing, altering the tilt of the lipid tail. X-ray reflectivity (XR) measurements of the lipid/mPE system demonstrate that mPE molecules insert through the headgroup region and partially into the tail group region, thus accounting for the observed disordering of tail packing. This study demonstrates that mPEs can mimic AMP's membrane disordering.     

Synthesis and spectroscopic and magnetic characterization of tris(3,5-dimethylpyrazol-1-yl)borate iron tricyanide building blocks, a cluster, and a one-dimensional chain of squares

The synthesis and spectroscopic and magnetic characterization of several hydridotris(3,5-dimethylpyrazol-1yl)borate (Tp*) iron(II) and iron(III) tricyanide complexes, a rectangular cluster, and a one-dimensional chain of squares are described. Treatment of [NEt4][(Tp*)Fe(III)(CN)3] (3) with manganese(II) triflate in dimethylformamide (DMF) affords rectangular clusters (6, {[(Tp)Fe(CN)2(mu-CN)Mn(DMF)4]2[OTf]2}.2DMF), while tosylate salts afford one-dimensional networks (5, {Mn(II)(DMF)2(mu-OTs)(mu-NC)2(NC)Fe(III)(Tp*)}n) containing embedded [(Tp*)2Fe(III)2Mn(II)2(CN)6]2+ clusters via in situ trapping; the cluster and network crystallize in the monoclinic (6, P2(1)/n) and triclinic (5, P1) space groups, respectively. The 1-D network (5) appears to be derived from {cis-(mu-O3SC6H4Me)2Mn(II)(DMF)4}n (4, P2(1)/n), which is obtained via crystallization of Mn(OTs)2 from DMF/Et2O mixtures. For 4, magnetic studies indicate that the Mn(II) centers are magnetically isolated, with calculated J, g, and theta constants of 6.7 x 10(-3) cm(-1), 2.03, and -0.52 K. Additional magnetic studies of 5 and 6 indicate that the [(Tp*)Fe(III)(CN)3]- centers are highly anisotropic (g = 2.9) and are antiferromagnetically coupled to adjacent Mn(II) centers. For 5 and 6, fitting of the chiT vs T data via the Curie-Weiss expression affords Curie (6.25 and 10.8 cm(3) K mol(-1)) and Weiss (-14.37 and -8.80 K) constants that are consistent with antiferromagnetically coupled low-spin Fe(III) and high-spin Mn(II) centers; least-squares fitting of the chiT vs T data using molecular field theory affords g(avg.), J1, J2, and J' values of 2.25, -1.72, -0.58, and -0.12 cm(-1) for 5. Overall, bridging tosylates appear to be poor communicators of spin information. For 6, the g, J1, and J2 (2.15, -2.02, and -0.78 cm(-1)) values were obtained via least-squares fitting of the chiT vs T data using an expression derived using the Kambe vector coupling method; simulations of the data via MAGPACK afford g(avg.) and J(iso) values of 2.1 and -2.1 cm(-1).     

Coordination complexes with cis-TCNE radical anion ligands. models of M[TCNE]2 magnets

The synthesis and characterization of two manganese(II) complexes formally each featuring two cis-tetracyanoethylenide radical anionic ligands (TCNE*/-) are reported. In each case, tris(pyrazol-1-ylmethyl)amine serves as a capping ligand, blocking three facial coordination sites. Crystal structures show that the two TCNE anions in each molecule exhibit an intramolecular stacking interaction that forms what can be considered a coordinated (TCNE2)2- moiety. These molecules are presumed to be structural models of some of the local bonding in the family of amorphous, ferrimagnetic, M[TCNE]2.y(solvent) coordination polymer magnets. Magnetic measurements indicate that the (TCNE2)2- bridge is diamagnetic and not a good mediator of magnetic exchange, a result that might explain the observed lower ordering temperatures in some of the polymer magnets.