Superhydrophobic 3D Microstructures Assembled From 1D Nanofibers of Polyaniline

Superhydrophobic dandelion‐like 3D microstructures self‐assembled from 1D nanofibers of PANI were prepared by a self‐assembly process in the presence of perfluorosebacic acid (PFSEA) as a dopant. The dandelion‐like microspheres (about 5 µm) are composed of uniform Y‐shaped junction nanofibers of about 210 nm average diameter and several micrometers in length, as measured by SEM. The dandelion‐like microstructure is coreless with a hollow cavity, and the shell thickness is about one third of the sphere diameter, as measured by TEM. Since PFESA dopant has a low surface energy perfluorinated carbon chain and two hydrophilic  COOH end groups, it has dopant, is a “soft‐template” and brings about superhydrophobic functions at the same time. Moreover, it is proposed that the self‐assembly of PANI 1D nanofibers, driven by a combined interaction of hydrogen bonding, π‐π stacking and hydrophobic interactions, leads to the formation of the 3D microstructures.

     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups: Part 6. Sorption and separation of gold and silver by a polyhydroxamic acid

The sorption and desorption characteristics of gold and silver on a polyhydroxamic acid chelating resin are described. Gold is quantitatively sorbed from 0.5 M nitric acid or neutral solutions, and readily eluted with 0.5% ($\text{w}\text{v}$) potassium cyanide solution. Silver is removed from 0.05 M nitric acid or neutral solutions, and can be eluted with the cyanide solution or with 0.5 M nitric acid. Gold can be quantitatively separated from copper, iron and silver; gold and silver are sorbed from dilute cyanide solutions. Tests with river water and other eluting systems are reported.     

聚-N-乙烯基咔唑和2,4,7-三硝基-9-芴酮电荷转移复合物的稳定态光电导

<正> 聚-N-乙烯基咔唑(PVCz)和2,4,7-三硝基-9-芴酮(TNF)电荷转移复合物(CTC)是良好的有机光导体,已应用于静电复印和全息照相技术,该体系的载流子产生、载流子迁移及载流子复合等已进行过许多研究。而关于该体系的光导作用光谱仅有Schaffert和Lardon用表面电荷衰减法测量过,光敏范围扩展到可见光区。本文     

弹塑性摩擦接触问题形状设计灵敏度分析

提出了一种计算二维有限变形弹塑性摩擦接触问题形状设计灵敏度的算法. 采用主动集策略和mortar方法处理接触边线上的约束条件. 在mortar接触边线的切线和法线方向上采用相同的名义罚函数,提出基于名义罚函数的移动摩擦锥算法来正则化接触约束条件,发展了一种新的二维多体有限变形摩擦接触算法. 在此基础上, 通过将离散形式的摩擦接触问题控制方程对形状设计变量微分,得到了该路径相关问题的直接微分法解析设计灵敏度计算格式, 其节点位移灵敏度方程在每个增量步不用迭代、直接求解. 与国际上现有的二维多体有限变形摩擦接触问题的解析设计灵敏度算法相比,本算法不需分解为法向和切向推导,表达式较简洁,便于编程实现. 数值算例验证了算法的精度和有效性.      

弹塑性板壳结构非线性有限元分析

本文根据塑性流动理论的基本公式，由隐式积分导出了与路径无关的变量更新算法和一致切线模量。采用单元广义应力应变直接离散塑性流动定律，构造了杂交应力单元一致切线刚度矩阵的显式表达式，编制了结构有限元程序ＳＡＦＥ，数值算例表明：本文的计算方法和计算程序是正确可靠的，可用于弹塑性板壳结构的非线性分析，计算结果屈曲临界载荷和极限承载能力。     

Switched exponential state estimation of neural networks based on passivity theory

In this paper, a new exponential state estimation method is proposed for switched Hopfield neural networks based on passivity theory. Through available output measurements, the main purpose is to estimate the neuron states such that the estimation error system is exponentially stable and passive from the control input to the output error. Based on augmented Lyapunov–Krasovskii functional, Jensen’s inequality, and linear matrix inequality (LMI), a new delay-dependent state estimator for switched Hopfield neural networks can be achieved by solving LMIs, which can be easily facilitated by using some standard numerical packages. The unknown gain matrix is determined by solving delay-dependent LMIs. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed method.     

动力UH模型及其有限元应用

饱和砂土在循环载荷下具有复杂的应力应变关系, 通常表现出液化过程中的大变形以及往返活动性现象. 为简单有效地模拟上述特性, 在超固结UH模型的基础上, 将其扩展为可考虑砂土动力加载下的本构模型. 具体做法有3点: (1)改变屈服面椭圆长短轴之比, 将比值定义为反映应力诱导各向异性转轴斜率的函数; (2)引入旋转硬化规则, 用来反映应力诱导各向异性; (3)建立一个与旋转硬化规则以及临界状态特性相协调的统一硬化参数. 模型预测结果表明, 所提动力模型可简单、有效地用于砂土在动力载荷下应力应变关系的模拟. 最后将该动力UH模型嵌入到有限元软件中, 三维地基的动力加载模拟结果表明, 动力UH模型可方便地应用于岩土工程实践中.      

基于临界状态的砂土本构模型研究

砂土孔隙比及所受压力是其力学特性的重要影响因素. 本文基于砂土临界状态线特性分析,采用以e-(p/p_a)ξ平面内的线性关系描述其等向压缩线. 通过对比分析两种不同压缩线函数 与临界状态线函数之间的关系提出更适合描述砂土在等向压缩下的参考压缩线,并给出了基于参考压缩线的等向硬化规律. 建议了适用于 描述砂土剪切特性的屈服面函数,并给出利用等向压缩和等p路径确定屈服面形状参数μ的方法. 将不同应力比对应的压缩线作为砂土状态参量参考线,以获取潜在强度M_f与特征状态应力比M_c,进而描述砂土压缩与剪切特性;基于等向压缩与等p路径建立了当前应力比与状态参量参考线之间的相关关系,从而实现了砂土状 态参量参考线由参考压缩线向临界状态线平稳过渡. 建立的砂土本构模型共11个参数,均能够通过常规土工试验或经验获取. 基于模型预测与Toyoura砂的等向压缩、三轴不排水剪切试验及排水剪切试验的对比结果,本文建立的砂土本构模型很好地描述了Toyoura 砂在不同孔隙比和不同压力下的压缩与剪切特性.      

复杂大气入流下海上风机力学特性研究

随着风能技术的不断进步, 风机叶片逐渐向大型化发展, 这使得真实复杂大气入流对风机运行性能的影响愈发显著. 为研究真实复杂大气入流下海上风机的力学特性响应, 利用基于大涡模拟的域前模拟方法生成复杂大气入流, 并结合致动线模型模拟风机叶片, 对中性复杂大气入流下海上固定式风机进行数值模拟, 重点分析风机的气动性能及转子和叶片根部的力学特性, 并与均匀入流计算工况进行对比. 计算结果表明, 中性复杂大气入流中的大尺度低速气流团使得风机气动功率输出值在较长一段时间处于较低水平, 此外, 中性复杂大气入流的高湍流强度特征使得风机气动功率的变化幅值和标准差较均匀入流工况大幅增加; 风机轴向推力的标准差值增加到均匀入流的53倍, 中性复杂大气入流的来流流场扰动引起偏航力矩的最大值、均方根和标准差分别增加到均匀入流的10、4.4和4.3倍; 速度垂向分布的不均匀性以及轮毂高度附近的大尺度低速羽流结构导致摆振剪力和弯矩的标准差响应值分别为均匀入流的2倍和4.6倍.      

Multistable dynamics in a Hopfield neural network under electromagnetic radiation and dual bias currents

Nonlinear Dynamics - This paper investigates a Hopfield neural network under the simulation of external electromagnetic radiation and dual bias currents, in which the fluctuation of magnetic flux...