高速粒子场同轴Fraunhofer全息数据处理系统研究

介绍了用同轴Fraunhofer全息测量强动载下材料表面微喷射粒子场的数据处理方法.在全息像重建过程中，将再现的三维粒子场由计算机控制分成许多小薄层采集.在数据处理过程中根据图像中粒子边缘，决定在整幅图或局部采用边缘检测的方法提取大粒子，根据图像的灰度分布将图像分成很多小区域，在每个小区域采用不同的阈值分割图像.在处理结果的校正中根据粒子场的特点，去除过大、过小和重复统计粒子.采用该方法得到了粒子的空间分布图像及粒子大小的统计结果.     

铁电SBN薄膜电光系数的测量及其在波导中的应用

利用溶胶-凝胶法在MgO(001)衬底上获得C轴择优取向的铁电铌酸锶钡(SBN)薄膜,主要介绍MgO(001)衬底上SBN60薄膜及掺入的K离子与Nb离子摩尔比例为1：3的SBN60薄膜横向电光系数r51的测量,实验测得不掺K的SBN60薄膜r51值为37．6pm／V,掺K的r51值为58．5pm／V。并由此设计一种基于MgO(001)衬底上的马赫一曾德尔型SBN60薄膜波导调制器,计算出在633nm时,掺K比例为1：3的此种波导调制器半波调制电压值为10V,不掺K的半波电压值为16V,结果说明掺入K离子能增加薄膜的横向电光系数并有效的减少波导的半波调制电压。     

Intensity-related dynamics of femtosecond frequency combs

We have performed systematic studies of intensity-related dynamics of the pulse repetition and carrier-envelope offset frequencies in mode-locked Ti:sapphire lasers. We compared the results far two laser systems that have different intracavity dispersion-compensation schemes. We found that the carrier-envelope phase noise and its dynamic response depend critically on the mode-locking conditions. An intensity-related shift of the laser spectrum was found to be instrumental in interpretations.     

Pressure-induced phase transitions of multiferroic BiFeO3

Pressure-induced phase transitions of multiferroic BiFeO3 have been investigated using synchrotron radiation X-ray diffraction with diamond anvil cell technique at room temperature. Present experimental data clearly show that rhombohedral （R3c） phase of BiFeO3 first transforms to monoclinic （C2/m） phase at 7 GPa, then to orthorhombic （Pnma） phase at 11 GPa, which is consistent with recent theoretical ab initio calculation. However, we observe another peak at 2θ=7° in the pressure range of 5-7 GPa that has not been reported previously. Further analysis reveals that this reflection peak is attributed to the orthorhombic （Pbam） phase, indicating the coexistance of monoclinic phase with orthorhombic phase in low pressure range.     

All-optical broadcast and multicast technologies based on PPLN waveguide

All-optical 1 ×4 broadcast and 1 ×3 multicast experiments of a 40-Gb/s return-to-zero on-off keying （RZ- OOK） signal based on a periodically poled lithium niobate （PPLN） waveguide are demonstrated in this letter. Clear opened eye diagrams and error-free performance are achieved for the broadcast signals at 1541.3, 1543.7, 1548.5, and 1550.9 nm. Multicast technology uses cascaded second-harmonic generation and difference-frequency generation in a Ti：PPLN waveguide. An error-free operation with a negligible power penalty is achieved for the three wavelength-division multiplexing multicast signals at 1533, 1537, and 1541 nm.     

Fabrication of rhenium Josephson junctions

Rhenium is a superconductor with a relatively weak tendency to oxidize, which is advantageous in superconducting quantum circuit and qubit applications. In this work, Re/A1-A1Ox/Re Josephson tunnel junctions were fabricated using a selective film-etching process similar to that developed in Nb trilayer technology. The Re films had a superconducting transition temperature of 4.8 K and a transition width of 0.2 K. The junctions were found to be highly reproducible using the fabrication process and their characteristics had good quality with a low leakage current and showed a superconducting gap of 0.55 meV.     

二氯氧锆比色法测定陈皮中的总黄酮

建立陈皮中总黄酮的含量测定方法,以控制其质量.以橙皮苷为对照品,采用ZrOCl2比色法测定陈皮中总黄酮的含量,测定波长为312.5nm.在浓度0.0044-0.022mg/mL范围内,吸光度与浓度呈良好的线性关系（r-0.9999）,平均回收率为100.69％,RSD为1.64％（n=6）.本法操作简单,具有良好的稳定性和重现性,适用于陈皮中总黄酮的含量测定和评价.     

Cross section of the impact single ionization of B2＋ by H＋

The ionization process of B2+ by H+ impact is studied using the continuum-distorted-wave eikonal-initial-state (CDW-EIS) method and the modified free electron peak approximation (M-FEPA), respectively. Total, single-, and double- differential cross sections from 1s and 2s orbitals are presented for the energy range from 10 keV/u to 10 MeV/u. Comparison between the results from the two methods demonstrates that the total and single-differential cross sections for the high-energy incident projectile case can be well evaluated using the simple M-FEPA model. Moreover, the M-FEPA model reproduces the essential features of the binary-encounter (BE) bump in the double-differential cross sections. Thus, the BE ionization mechanism is discussed in detail by adopting the M-FEPA model. In particular, the double- and single-differential cross sections from the 2s orbital show a high-energy hip, which is different from those from the 1s orbital. Based on Ref. [1], the Compton profiles of B2+ for 1s and 2s orbitals are given, and the hips in DDCS and SDCS from the 2s orbital are explained.     

Micromagnetic analysis of transition noise for high-density perpendicular recording

In this paper, specific issues related to high-density perpendicular magnetic recording processes, such as transition noise properties and cross-track correlation lengths, were investigated with the help of micromagnetic analysis. The effects of media parameters were taken into consideration, including intergranular exchange coupling, and exchange distribution, irregular grain shapes, magnetization saturation distribution, and anisotropy distribution. The micromagnetic simulation results showed that the effect of anisotropy distribution on transition noise is more significant than magnetization saturation distribution, and it is crucial to reduce this effect to achieve a high signal-to-noise ratio. Additionally, a new method to further estimate the partial erasure threshold was proposed to approximate the partial erasure effects, and the relation between the microtrack jitter and total track jitter was investigated.     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.