高速串行数据链路中基于相位噪声时钟抖动测量

传统并行数据通信随着速度的增加,传输时延已难以准确控制,使得高速串行数据传输成为通信的主要方式,当数据速率超过Gb/s水平,时钟信号引入的抖动已成为系统抖动的主要成分,低数据速率抖动分析技术已难以满足要求,相位噪声测量技术在高速串行数据链路抖动分析中提供了解决方案,文章从原理上论述了相位噪声与抖动的关系,以实例给出了通过相位噪声测量间接测量抖动的工程计算方法。     

微型平面复合薄膜电爆炸开关的设计和研究（英文）

开关技术是影响爆炸箔起爆系统可靠作用、微型化、低能化、集成化的关键技术。电爆炸平面开关是利用强脉冲电流使触发极金属桥箔发生电爆炸,产生高温高压等离子体,使爆炸桥区两侧的电极导通。基于微加工技术,采用Al/CuO复合薄膜材料作为触发电极,设计制造了微型平面复合薄膜电爆炸开关。采用扫描电子显微镜、差示扫描量热法和光谱谱线测温研究了触发极Al/CuO复合薄膜的形貌、反应性和电爆炸等离子体温度,通过放电电流测试研究了开关性能。结果表明,在主回路电压2000V时,开关输出电流峰值约为1938A,上升时间390ns,性能优于仅以铜薄膜为触发电极的电爆炸平面开关。     

磷酸钾缓冲溶液与模型细胞膜相互作用的和频光谱

利用和频光谱技术详细研究了磷酸钾缓冲溶液与带负电荷的生物仿生膜(d₅₄-DMPG磷脂双层膜)相互作用的实时过程．通过监控CD₂、CD₃、磷脂分子头部的磷酸根以及羰基官能团的光谱信号随加入磷酸钾缓冲溶液的实时变化,获得了磷脂双层膜分子结构的动力学变化．结果表明K⁺能够结合到细胞膜上,并且很快地引起了CD₂、CD₃、磷脂头部磷酸根以及羰基官能团信号的变化．根据各官能团的和频信号响应,磷酸钾缓冲溶液很可能是通过在双层膜中形成环形气孔来与磷脂双层膜发生作用．该结果可以很好地解释磷酸钾缓冲溶液环境下的离子协助蛋白质的跨膜过程．     

Charge carrier decay and diffusion in organic–inorganic CH3NH3PbI3–xClx perovskite based solar cell

In recent years, organic–inorganic lead halides attracted widespread interest, mainly due to their impressive photoconversion properties and low‐cost solution processing. In this study, we employed small amplitude transient photovoltage and photocurrent spectroscopy to investigate charge transport and recombination properties of perovskite CH₃NH₃PbI_3–xCl_x solar cell under realistic light harvesting conditions (<1 sun). Cell structure resembles outlay commonly found in organic photovoltaics, with perovskite absorber being sandwiched between two thin layers of organic polymers. Tested device displayed high power conversion efficiency (10.3%), good fill factor and negligible hysteresis effect. Fundamental device parameters were characterized at various open‐circuit voltages (V_oc) by examination of small voltage and current perturbations created by the low intensity pulsed laser excitations. The obtained results exhibit long charge carrier lifetimes and fast charge transport over the full range of applied optical bias, as well as remarkable diffusion lengths exceeding 1 μm. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Spectroscopy and X-ray studies of {{6,6′-dimethoxy-2,2′-[ethane-1,2-diyl-bis-(nitrilomethylidyne)]diphenolato}(aqua)-dioxouranium(VI)} dehydrate

The C₁₈H₂₀N₂O₇U · 2H₂O (I) complex has been prepared and characterized by single crystal X-ray diffraction properties (CIF file CCDC no. 913243). The title compound crystallizes in the orthorhombic system, space group Pbca with a = 19.542(5), b = 9.916(5), c = 21.940(5) Å, V = 4252(3) ų and Z = 8. In complex I, the U atom has a distorted pentagonal-bipyramidal geometry with a tetradentate Schiff base ligand and water molecule in the equatorial plane and oxo atoms in the axial positions. The crystal packing occurs intra-inter molecular hydrogen bonds.     

Electrospinning synthesis and photocatalytic property of CaFe2O4/MgFe2O4 heterostructure for degradation of tetracycline

CaFe₂O₄/MgFe₂O₄ nanowires with heterostructure had been successfully synthesized by electrospinning method. The obtained samples were systematically characterized by scanning electron microscopy (SEM), X‐Ray diffraction (XRD), UV–Vis diffuse reflectance spectra (UV‐Vis DR) and Environment scanning electron microscopy (ESEM). The novel CaFe₂O₄/MgFe₂O₄ nanowires exhibit an enhanced photocatalytic activity for degrading of tetracycline (TC) under visible light. Compared with bare CaFe₂O₄ or MgFe₂O₄ samples, the prepared CaFe₂O₄/MgFe₂O₄ (Ca:Mg:Fe = 3:2:10) composited nanowires show the best photocatalytic performance with a degradation efficiency of 40% after 150 min reaction time. This enhancement is attributed to the heterostructure of CaFe₂O₄/MgFe₂O₄ nanowires, which effectively repress the recombination of photo‐generated electrons and holes. Based on heterostructure and energy band positions, the enhancement of mechanism under visible‐light enhances the photocatalytic activity.     

Improvements of Tolerance to Stress Conditions by Genetic Engineering in Saccharomyces Cerevisiae during Ethanol Production

Saccharomyces cerevisiae, industrial yeast isolate, has been of great interest in recent years for fuel ethanol production. The ethanol yield and productivity depend on many inhibitory factors during the fermentation process such as temperature, ethanol, compounds released as the result of pretreatment procedures, and osmotic stress. An ideal strain should be able to grow under different stress conditions occurred at different fermentation steps. Development of tolerant yeast strains can be achieved by reprogramming pathways supporting the ethanol metabolism by regulating the energy balance and detoxicification processes. Complex gene interactions should be solved for an in-depth comprehension of the yeast stress tolerance mechanism. Genetic engineering as a powerful biotechnological tool is required to design new strategies for increasing the ethanol fermentation performance. Upregulation of stress tolerance genes by recombinant DNA technology can be a useful approach to overcome inhibitory situations. This review presents the application of several genetic engineering strategies to increase ethanol yield under different stress conditions including inhibitor tolerance, ethanol tolerance, thermotolerance, and osmotolerance.     

Poly(HEMA-co-NBMI) Monolithic Cryogel Columns for IgG Adsorption

Supermacroporous poly(2-hydroxyethyl methacrylate-co-1,5-naphthalene bismaleimide) [poly(HEMA-co-NBMI)] monolithic cryogel column was prepared by free radical cryo-copolymerization of HEMA with NBMI as a hydrophobic functional comonomer and N,N′-methylene-bisacrylamide as cross-linker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix which has interconnected pores of 10–100 μm size. Poly(HEMA-co-NBMI) cryogel was characterized by swelling studies, FTIR and scanning electron microscopy. The equilibrium swelling degree of the poly(HEMA-co-NBMI) cryogel was 10.5 g of H₂O/g dry cryogel. Poly(HEMA-co-NBMI) cryogel was used in the adsorption/desorption of IgG from aqueous solutions. The maximum amount of IgG adsorption from aqueous solution in phosphate buffer was 98.20 mg/g polymer at pH 7.0. The nonspecific adsorption of IgG onto plain poly(HEMA) cryogel was very low (2.79 g/g polymer). It was observed that IgG could be repeatedly adsorbed and desorbed with the poly(HEMA-co-NBMI) cryogel without significant loss of adsorption capacity.     

Synthesis of nanometric β-barium metaborate powder from different borate solutions by ultrasound-assisted precipitation

In this study, the synthesis of barium metaborate powder (BaB₂O₄) was carried out by ultrasound-assisted precipitation using different borate solutions. Different solutions such as borax (Na₂B₄O₇, BD), boric acid (H₃BO₃, BA), and sodium metaborate (NaBO₂, SMB) were used in the synthesis and an ultrasonic immersion horn probe was used as the major source of ultrasound. The effect of reaction temperature and time, pH, and crystallization time on the BaB₂O₄ yield (%) was investigated. The ultrasound-assisted synthesis up to 90 % yield could be achieved using a 0.2 M BD solution at 80 °C, reacting for 5 min at pH 13 followed by 2 h of crystallization. Following crystallization, the obtained powder was heated up to 140, 250, 650, and 750 °C for 2.5 h, and it was shown that β-BaB₂O₄ nanometric powders were obtained after the 750 °C heat treatment.