Surface characterization of polyethylene terephthalate/silica nanocomposites

Poly(ethylene terephthalate) (PET) based nanocomposites containing hydrophilic (i.e. Aerosil 200 or Aerosil TT 600) or hydrophobic (i.e. Aerosil R 972) nano-silica were prepared by melt compounding. Influence of nano-silica type on surface properties of the resultant nanocomposites was investigated by the use of Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), contact angle measurement (CAM), scanning electron microscopy (SEM) and reflectance spectroscopy (RS). The possible interaction between nano-silica particles and PET functional groups at bulk and surface were elucidated by transmission FTIR and FTIR-ATR spectroscopy, respectively. AFM studies of the resultant nanocomposites showed increased surface roughness compared to pure PET. Contact angle measurements of the resultant PET composites demonstrated that the wettability of such composites depends on surface treatment of the particular nano-silica particles used. SEM images illustrated that hydrophilic nano-silica particles tended to migrate to the surface of the PET matrix.     

The Effect of Blending Sequence on Nanoclay Partitioning and Microfibrillar Morphology in Blend Nanocomposite Fibers

The aim of this article was to provide an insight into the effect of nanoclay partitioning on the droplet deformation and fibril formation in melt-compounded polypropylene/poly (butylene terephthalate)/organoclay blend nanocomposite fibers prepared by different blending sequences. An attempt was also made to investigate the effect of compatibilizer on the partitioning of nanoclay in these blend systems. Melt viscoelastic behavior, wide angle X-ray diffraction and transmission electron microscopy, along with scanning electron microscopy, revealed that the localization of nanoclay in the poly (butylene terephthalate) dispersed phase reduced the droplet deformation and fibril formation. It was demonstrated that the best microstructure of the blend nanocomposites for the fibrillation process was to have the maximum percentage of exfoliated nanoclay in both polymeric phases. Incorporation of compatibilizer can develop the microfibrillar morphology due to its assisting role in transferring a higher fraction of nanoclay platelets from droplets into the matrix and also increasing the extent of melt intercalation in the matrix.     

Effect of Nano TiO2 on Self-cleaning Property of Cross-linking Cotton Fabric with Succinic Acid Under UV Irradiation

Optimization of curing cotton textiles through self-cleaning property constructs the main goal of the present study. Cotton fabrics with 0.1, 0.3, 0.5, 1 and 1.5 on weight of bath percent were cured by nano titanium dioxide (P25 Degussa) with cross-link and non cross-link methods. In this study, succinic acid was used as a cross-link agent to attach TiO₂ to the cotton. The amount of loaded titania particles to cotton fabrics and the thermal behavior of cured samples were studied by the burning method and thermogravimetric analysis, respectively. Self-cleaning degree of cured samples, stained with natural and synthesized dyes under irradiation of 20 and 400 W UV lamps was investigated by a reflectance spectrophotometer. The structure and morphology of treated cotton fabrics were investigated using scanning electron microscopy and crystallinity of titania coatings by X-ray diffraction spectroscopy. The tearing strengths of titania-coated cotton fabrics before and after light irradiation were measured. Results showed that the stability of nano TiO₂ coating and self-cleaning degree of treated samples with cross-link method were much higher than those of non cross-link method, and cotton cellulosic chains were not decomposed by the photocatalytic activity of titania.