Investigation on novel thermoplastic poly(urethane-thiourea-imide)s with enhanced chemical and heat resistance

A new generation of segmented thermoplastic poly(urethane-thiourea-imide)s (PUTIs) was synthesized via reaction of polyethylene glycol and thiourea-based prepolymer with dianhydride as chain extenders. NCO-terminated prepolymer was synthesized from a new diisocyanate, 3-(3-((4-isocyanatophenyl)carbamoyl)thioureido)phenyl-4-isocyanatophenylcarbamate (IPCT), as a hard segment and PEG forming soft segment. The starting materials and polymers were characterized by conventional methods and physical properties such as solubility, solution viscosity, molecular weight, thermal stability and thermal behavior were studied. PUTIs showed partially crystalline structures. Weight average molecular weights of PUTIs (GPC measurements) were in the range of 1,68,694-1,97,035. Moreover, thermogravimetric analysis indicated that poly(urethane-thiourea-imide)s were fairly stable above 500 °C having T₁₀ of 521-543 °C. Investigation of the results authenticated the approach of introducing thiourea (using IPCT) and imide structure in polyurethanes for the improvement of thermal stability. In comparison to typical polyurethanes, these polymers exhibited better heat resistance, chemical resistance as well as processability.     

Selective pre-concentration of selenite from aqueous samples using mercapto-silica

Silica gel modified with 3-mercaptopropyl-trimethoxysilane was used for the selective separation and pre-concentration of selenite (Se(IV)) from aqueous solutions containing Se(IV) and selenate (Se(VI)). Over a wide range of acidity, from 2 mol l⁻¹ HCl to pH 9.00, Se(IV) was taken up by the mercaptopropyl-silica with nearly 100% efficiency; Se(VI) however was unretained. Se(IV) content was determined by hydride generation atomic absorption spectrometry (HGAAS), following batch release of the selenium from the pre-concentration medium by acidic periodate. The overall pre-concentration efficiency, including both take-up and elution, in the range of 89-106%. The method was applied to spiked seawater samples containing as low as 800 ng l⁻¹ Se in selenite form. This solid-phase extraction system offers several major advantages over conventional solvent extraction procedures. It firstly exhibits high selectivity for Se(IV) over Se(VI). Using the solid-phase media, pre-concentration of Se(IV) in dilute water samples can be carried out in the field, stabilizing the selenite-selenium in a convenient form for transport and storage. In addition, selenium stored on silica is derived solely from Se(IV) overcoming problems of selenium redox speciation changes and loss during storage.     

Microwave-assisted and conventional synthesis of new phthalocyanines containing 4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one moieties

New metal-free and metal (Zn, Ni, Cu and Co) phthalocyanines containing 4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one moiety have been prepared from 1-(3,4-dicyanophenyl)-4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one by both conventional and microwave-assisted methods. All of these compounds are soluble in CHCl₃, DMF and DMSO. The new compounds have been characterized by elemental analysis, IR, NMR, UV-Vis spectroscopies. The crystal structures of compounds I and II were also determined by the single crystal diffraction technique.     

Synthesis,Characterization and Electrorheological Properties of Polyindene/Kaolinite Composites

In this study, synthesis, characterization and electrorheological (ER) properties of polyindene (PIN) and polyindene/kaolinite composites were carried out by cationic radical polymerization using FeCl₃ as the oxidizing agent. The homopolymer and composites, containing different amounts of PIN were characterized by FTIR spectroscopy, thermo‐gravimetric (TGA) analyses, scanning electron microscopy (SEM) and dynamic light scattering (DLS) methods. The conductivity and dielectric properties of PIN and PIN/kaolinite composites were determined. Suspensions of PIN and PIN/kaolinite composites were prepared in silicone oil (SO), at a series of concentrations (c=5–25 m/m %). The effects of concentration, shear rate, electric field strength, frequency, temperature and promoter on ER activities of suspensions were investigated.     

Cloud point extraction procedure for flame atomic absorption spectrometric determination of lead(II) in sediment and water samples

The conditions for cloud point extraction of lead(II) from aqueous solutions were investigated and optimized. The procedure is based on the separation of Pb(II) – brillant cresyl blue (BCB) complexes into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1 mol L⁻¹ HNO₃ in ethanol and diluted with 1 mol L⁻¹ HNO₃ solution before lead was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions was performed. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for lead were 7.5 μg L⁻¹ for water samples and 0.33 μg g⁻¹ for sediment samples. The validity of cloud point extraction was checked by employing certified reference samples of Lake Sediment IAEA-SL-1 and Sewage Sludge BCR-CRM 144R. The procedure was applied to natural waters and sediment samples with satisfactory results (recoveries >95%, relative standard deviations <6.4%).     

Optical frequency conversion by a rotating molecular wave plate

We demonstrate efficient four-wave mixing in low-pressure molecular deuterium without the need for phase matching. We use two laser fields with opposite circular polarizations to produce a strong excitation of a rovibrational transition at a frequency of 3167 cm(-1) . The coherent molecular motion, in turn, modulates a third laser field (also circularly polarized) and results in highly efficient single-sideband conversion.     

Pore-Scale Analysis of NAPL Blob Dissolution and Mobilization in Porous Media

A pore-scale analysis of nonaqueous phase liquid (NAPL) blob dissolution and mobilization in porous media was presented. Dissolution kinetics of residual NAPLs in an otherwise water-saturated porous medium was investigated by conducting micromodel experiments. Changes in residual NAPL volume were measured from recorded video images to calculate the mass transfer coefficient, K and the lumped mass transfer rate coefficient, k. The morphological characteristics of the blobs such as specific and intrinsic area were found to be independent of water flow rate except at NAPL saturations below 2%. Dissolution process was also investigated by separating the mass transfer into zones of mobile and immobile water. The fractions of total residual NAPL perimeters in contact with mobile water and immobile water were measured and their relationship to the mass transfer coefficient was discussed. In general, residual NAPLs are removed by dissolution and mobilization. Although these two mechanisms were studied individually by others, their simultaneous occurrence was not considered. Therefore, in this study, mobilization of dissolving NAPL blobs was investigated by an analysis of the forces acting on a trapped NAPL blob. A dimensional analysis was performed to quantify the residual blob mobilization in terms of dimensionless Capillary number (Ca _I). If Ca _I is equal to or greater than the trapping number defined as , then blob mobilization is expected.     

Refractive index enhancement in a far-off resonant atomic system

We demonstrate a scheme where a laser beam which is very far detuned from an atomic resonance experiences a large index of refraction with vanishing absorption. The essential idea is to excite two Raman resonances with appropriately chosen strong control lasers.     

Affinity adsorption of recombinant human interferon-α on a porous dye-affinity adsorbent

Interferons are potent biologically active proteins synthesized and secreted by somatic cells of all mammalian species. Dye-affinity adsorption is increasingly used for protein separation. Hollow fibers have several advantages as adsorbents in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow fibers to which Cibacron Blue F3GA was attached for adsorption of recombinant interferon-α (rHuIFN-α). The hollow fiber was characterized by scanning electron microscopy. These dye-carrying hollow fibers (35.8 μmol/g) were used in the rHuIFN-α adsorption-elution studies. The effects of initial concentration of rHuIFN-α, medium pH, ionic strength and temperature on the adsorption efficiency of dye-attached hollow fibers were studied in a batch system. The non-specific adsorption of rHuIFN-α on the hollow fibers was 1.2 mg/g. Cibacron Blue F3GA attachment significantly increased the rHuIFN-α adsorption up to 99.8 mg/g. Significant amount of the adsorbed rHuIFN-α (up to 94.8%) was eluted in 1 h in the elution medium containing 1.0 M NaCl. In order to determine the effects of adsorption conditions on possible conformational changes of rHuIFN-α structure, fluorescence spectrophotometry was employed. We resulted that dye-affinity hollow fibers can be applied for rHuIFN-α adsorption without causing any significant conformational changes. Repeated adsorption/elution processes showed that these dye-attached hollow fibers are suitable for rHuIFN-α adsorption.     

Building an Iron Chromophore Incorporating Prussian Blue Analogue for Photoelectrochemical Water Oxidation

The replacement of traditional ruthenium-based photosensitizers with low-cost and abundant iron analogs is a key step for the advancement of scalable and sustainable dye-sensitized water splitting cells. In this proof-of-concept study, a pyridinium ligand coordinated pentacyanoferrate(II) chromophore is used to construct a cyanide-based CoFe extended bulk framework, in which the iron photosensitizer units are connected to cobalt water oxidation catalytic sites through cyanide linkers. The iron-sensitized photoanode exhibits exceptional stability for at least 5 h at pH 7 and features its photosensitizing ability with an incident photon-to-current conversion capacity up to 500 nm with nanosecond scale excited state lifetime. Ultrafast transient absorption and computational studies reveal that iron and cobalt sites mutually support each other for charge separation via short bridging cyanide groups and for injection to the semiconductor in our proof-of-concept photoelectrochemical device. The reorganization of the excited states due to the mixing of electronic states of metal-based orbitals subsequently tailor the electron transfer cascade during the photoelectrochemical process. This breakthrough in chromophore-catalyst assemblies will spark interest in dye-sensitization with robust bulk systems for photoconversion applications.