Evaluation of carbonic anhydrase and paraoxonase inhibition activities and molecular docking studies of highly water-soluble sulfonated phthalocyanines

The investigation of carbonic anhydrase and paraoxonase enzyme inhibition properties of water-soluble zinc and gallium phthalocyanine complexes ( 1 and 2 ) are reported for the first time. The binding of p-sulfonylphenoxy moieties to the phthalocyanine structure favors excellent solubilities in water, as well as providing an inhibition effect on carbonic anhydrase (CA) I and II isoenzymes and paraoxonase (PON1) enzyme. According to biological activity results, both complexes inhibited hCA I, hCA II, and PON1. Whereas 1 and 2 showed moderate hCA I and hCA II (off-target cytosolic isoforms) inhibitory activity (Ki values of 26.09 µM and 43.11 µM for hCA I and 30.95 µM and 33.19 µM for hCA II, respectively), they exhibited strong PON1 (associated with high-density lipoprotein [HDL]) inhibitory activity (Ki values of 0.37 µM and 0.27 µM, respectively). The inhibition kinetics were analyzed by Lineweaver–Burk double reciprocal plots. It revealed that 1 and 2 were noncompetitive inhibitors against PON1, hCA I, and hCA II. These complexes can be more advantageous than other synthetic CA and PON inhibitors due to their water solubility. Docking studies were carried out to examine the interactions between hCA I, hCA II, and PON1 inhibitors and metal complexes at a molecular level and to predict binding energies.     

The development of information storage materials — How microscopy can help?

The response of giant magnetoresistance (GMR) devices depends critically on the film microstructure, with parameters such as layer thickness and interfacial abruptness being crucial. This paper presents results obtained using high resolution electron microscopy (HREM), chemical mapping and atom probe microanalysis. Local variations in the magnetic properties are induced by the microstructure and also when the films are patterned to form small elements. These lead to changes in the magnetization reversal mechanism. Some results of the studies of the magnetization reversal carried out using in situ in Lorentz transmission electron microscopy (LTEM) magnetizing experiments are also included.     

Peak effect studies in single crystals CeRu2 and 2H-NbS2

We have studied the peak effect (PE) phenomenon in single crystals of weakly pinned superconductors CeRu₂ and 2H-NbS₂. 2H-NbS₂ is iso-structural and iso-electronic to 2H-NbSe₂, whose similarity with CeRu₂ as regards the PE representing the order-to-disorder transformation of the flux line lattice was claimed some time ago. We report on the step change in equilibrium magnetization across the peak effect in CeRu₂. We also present the vortex phase diagram of 2H-NbS₂ obtained from the magnetization data, and compare the PE phenomenon in 2H-NbS₂ and 2H-NbSe₂.     

Molecular organization in SAMs used for neuronal cell growth

The attachment of cells onto solid supports is fundamental in the development of advanced biosensors or biochips. In this work, we characterize cortical neuron adhesion, growth, and distribution of an adhesive layer, depending on the molecular structure and composition . Neuronal networks are successfully grown on amino-terminated alkanethiol self-assembled monolayer (SAM) on a gold substrate without adhesion protein interfaces. Neuron adhesion efficiency was studied for amino-terminated, carboxy-terminated, and 1:1 mixed alkanethiol SAMs deposited on gold substrates. Atomic force microscopy and X-ray photoelectron spectroscopy were used to measure the roughness of gold substrate and thickness of SAM monolayers. Conformational ordering and ionic content of SAMs were characterized by vibrational sum frequency generation (VSFG) spectroscopy. Only pure amino-terminated SAMs provide efficient neuronal cell attachment. Ordering of the terminal amino groups does not affect efficiency of neuron adhesion. VSFG analysis shows that ordering of the terminal groups improves with decreasing surface roughness; however the number of gauche defects in alkane chains is independent of surface roughness. We monitor partial dissociation of carboxy groups in mixed SAMs that implies formation of NH3+ neighbors and appearance of catanionic structure. Such catanionic environment proved inefficient for neuron adhesion. Surface roughness of metal within the 0.7-2 nm range has little effect on the efficiency of neuron adhesion. This approach can be used to create new methods that help map structure-property relationships of biohybrid systems.     

Tunable infrared generation in KTA and applications

Noncollinear difference frequency mixing of dye laser and Nd:YAG second harmonic (fundamental) radiation from a commercial laser system is employed for the generation of 2.7–5.3 μm (1.6–1.7 μm) radiations in a flux-grown KTiOAsO₁ crystal. The generated radiation is used to scan the methane absorption in the fundamental (v ₃) and its first overtone (2v ₃) band at pressure 90 torr in a laboratory made single pass gas cell of length 33 cm.     

关于K个复相关矩阵相等的检验

§ 1.Ｉｎｔｒｏｄｕｃｔｉｏｎ　ＷｅａｒｅｇｉｖｅｎｋｉｎｄｅｐｅｎｄｅｎｔＷｉｓｈａｒｔｄｅｎｓｉｔｉｅｓｏｆｔｈｅ (ｐ +ｑ)× (ｐ +ｑ)ｒａｎｄｏｍｓｙｍｍｅｔｒｉｃｐｏｓｉｔｉｖｅｄｅｆｉｎｉｔｅｍａｔｒｉｃｅｓＧ1,… ,Ｇｋｔｏｂｅｇ(Ｇｉ) =Ｋｅｘｐ -12 ｔｒＲ- 1ｉ Ｇｉ Ｇｉ12 (ｎｉ- ｑ-ｐ- 1) ,(1 )ｗｈｅｒｅｉ=1 ,… ,ｋ,ａｎｄＲｉｄｅｎｏｔｅｓｔｈｅｐｏｐｕｌａｔｉｏｎｃｏｒｒｅｌａｔｉｏｎｍａｔｒｉｘｏｆｔｈｅｉ ｔｈｐｏｐｕｌａｔｉｏｎａｎｄＫａｓａｇｅｎｅｒｉｃｌｅｔｔｅｒｄｅｎｏｔｅ…     

Study of theS-matrix near bound states in the continuum

The behaviour ofS-matrix for potentials generating bound states in continuum in the neighbourhood of the positive bound state energies is studied. It is shown that unlike the case of usual negative energy bound states, theS-matrix does not have a pole at the positive bound state energy but becomes unity at the energy corresponding to bound states in continuum. Calculations ofS-waveS-matrix for a local potential constructed by Stillinger and Herrick and a separable nonlocal potential constructed by the present authors verify these results. Our results indicate that the bound states embedded in continuum constructedvia the von Neumann and Wigner procedure cannot be interpreted as resonances with zero width.     

Photon transport in thin disordered slabs

We examine using Monte Carlo simulations, photon transport in optically ‘thin’ slabs whose thickness L is only a few times the transport mean free path l*, with particles of different scattering anisotropies. The confined geometry causes an auto-selection of only photons with looping paths to remain within the slab. The results of the Monte Carlo simulations are borne out by our analytical treatment that incorporates directional persistence by the use of the Ornstein-Uhlenbeck process, which interpolates between the short time ballistic and long time diffusive regimes.     

Determination of blood glucose parameter from human blood serum by using a quartz crystal microbalance sensor coated with phthalocyanines compounds

Determining the blood glucose level is important for the prevention and treatment of diabetes mellitus. We developed a sensor system using Quartz Crystal Microbalance (QCM) to determine the blood glucose level from human blood serum. This study consists of two experimental stages: artificial glucose/pure water solution tests and human blood serum tests. In the first stage of the study, the QCM sensor with the highest performance was identified using artificial glucose solution concentrations. In the second stage of the study, human blood serum measurements were performed using QCM to determine blood glucose levels. QCM sensors were coated with phthalocyanines (Pcs) by jet spray method. The blood glucose values of 96 volunteers, which ranged from 71 mg/dL to 329 mg/dL, were recorded. As a result of the study, human glucose values were determined with an average error of 3.25%.     

Sensitive determination of hydrazine using poly(phenolphthalein), Au nanoparticles and multiwalled carbon nanotubes modified glassy carbon electrode

This study reports a detailed analysis of an electrode material containing poly(phenolphthalein), carbon nanotubes and gold nanoparticles which shows superior catalytic effect towards to hydrazine oxidation in Britton–Robinson buffer (pH 10.0). Glassy carbon electrode was modified by electropolymerization of phenolphthalein (PP) monomer (poly(PP)/GCE) and the multiwalled carbon nanotubes (MWCNTs) was dropped on the surface. This modified surface was electrodeposited with gold nanoparticles (AuNPs/CNT/poly(PP)/GCE). The fabricated electrode was analysed the determination of hydrazine using cyclic voltammetry, linear sweep voltammetry and amperometry. The peak potential of hydrazine oxidation on bare GCE, poly(PP)/GCE, CNT/GCE, CNT/poly(PP)/GCE, and AuNPs/CNT/poly(PP)/GCE were observed at 596 mV, 342 mV, 320 mV, 313 mV, and 27 mV, respectively. A shift in the overpotential to more negative direction and an enhancement in the peak current indicated that the AuNPs/CNT/poly(PP)/GC electrode presented an efficient electrocatalytic activity toward oxidation of hydrazine. Modified electrodes were characterized with High-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Amperometric current responses in the low hydrazine concentration range of 0.25–13 µM at the AuNPs/CNT/poly(PP)/GCE. The limit of detection (LOD) value was obtained to be 0.083 µM. A modified electrode was applied to naturel samples for hydrazine determination.