Synthesis of all of the four possible stereoisomers of pestalotin,a gibberellin synergist isolated from pestalotia cryptomeriaecola sawada

(-)-Pestalotin [(6S, l'S)-6-(1'-hydroxypentyl)-4-methoxy-5,6-d dihydro-2-pyrone 1a]and its three other stereoisomers were synthesized either by utilizing the Sharpless asymmetric epoxidation as the keystep or by derivation from D-(+)-glyceraldehyde acetonide.     

Synthesis and anti-HIV-1 activity of novel 10-thiaisoalloxazines,a structural analog of C-5 and/or C-6 substituted pyrimidine acyclonucleoside

A series of novel 10-thiaisoalloxazine derivatives bearing an alkoxymethyl or benzyloxymethyl moiety at the N-1 position has been synthesized through the bromination of 1-substituted-5-hydroxyuracils and subsequent condensation with aminobenzenethiol in a one-pot reaction. Contrary to the previous report, the formation of intermediary 5,6-diethoxy-5-hydroxy-5,6-dihydrouracil seems to be not the necessary factor for the formation of the thiaisoalloxazines, since the reaction proceeds in tetrahydrofuran (THF) or acetonitrile far more smoothly than in ethanol. The anti-human immunodeficiency virus (HIV)-1 activity of the resulted thiaisoalloxazine derivatives was evaluated in lymphocyte cells based on the inhibitory activity against the viral-induced cytopathic activity. Among the derivatives, compounds 6, 7, and 8 bearing an alkoxymethyl moiety at the N-1 position exhibited modest inhibitory activity towards the cytotopathic effect of HIV-1.     

Metal-dependent regioselective oxidative coupling of 5,10,15-triarylporphyrins with DDQ-Sc(OTf)3 and formation of an oxo-quinoidal porphyrin

[reaction: see text] Regioselectivity of the oxidative coupling of 5,10,15-triarylporphyrin metal complexes with DDQ-Sc(OTf)(3) was dependent on the central metal and meso-aryl substituent. Oxo-quinoidal porphyrin was obtained from Ni(II) porphyrin under the same conditions.     

Synthesis of 2-alkylidenetetrahydrofurans by Ru-catalyzed regio- and stereoselective codimerization of dihydrofurans with alpha,beta-unsaturated esters

2-(1-Alkoxycarbonyl)alkylidenetetrahydrofurans were readily synthesized by the codimerization of 2,3- or 2,5-dihydrofurans with alpha,beta-unsaturated esters using a zerovalent Ru catalyst, Ru(cod)(cot), with high regio- and stereoselectivity.     

Ferromagnetic anomaly associated with the antiferromagnetic transitions in (donor)[Ni(mnt)2]-type charge-transfer salts

Three newly prepared [Ni(mnt)2] complexes, (HMTTF)[Ni(mnt)2], (ChSTF)[Ni(mnt)2], and (DBTTF)2[Ni(mnt)2], are reported (DBTTF = dibenzotetrathiafulvalene, ChSTF = 2,3-cyclohexylenedithio-1,4-dithia-5,8-diselanafulvalene, HMTTF = bis(trimethylene)-tetrathiafulvalene, and mnt = maleonitrile dithiolate). The former two compounds have usual DA-type (D = donor, A = acceptor) mixed stacks, whereas the DBTTF complex has DDDDAA-type 6-fold columns. These compounds are electrical insulators, but the HMTTF and ChSTF complexes exhibit chiT minima at 16 and 55 K, respectively, followed by chiT peaks at 8 and 16 K. Below these temperatures the ESR signal disappears, indicating antiferromagnetic transitions. The origin of the ferromagnetic interaction is explained either from the difference of the g values between the donor and the anion or from the intrinsic ferromagnetic interaction of the [Ni(mnt)2] anions.     

Control of photoinduced energy- and electron-transfer steps in zinc porphyrin-oligothiophene-fullerene linked triads with solvent polarity

The dramatic changes of the lifetimes of the charge-separated (CS) states were confirmed in zinc porphyrin (ZnP)-oligothiophene (nT)-fullerene (C(60)) linked triads (ZnP-nT-C(60)) with the solvent polarity. After the selective excitation of the ZnP moiety of ZnP-nT-C(60), an energy transfer took place from the (1)ZnP moiety to the C(60) moiety, generating ZnP-nT-(1)C(60). In polar solvents, the CS process also took place directly via the (1)ZnP moiety, generating ZnP(*+)-nT-C(60)(*-), as well as the energy transfer to the C(60) moiety. After this energy transfer, an indirect CS process took place from the (1)C(60) moiety. In the less polar solvent anisole, the radical cation (hole) of ZnP(*+)-nT-C(60)(*-) shifted to the nT moiety; thus, the nT moiety behaves as a cation trapper, and the rates of the hole shift were evaluated to be in the order of 10(8) s(-1); then, the final CS states ZnP-nT(*+)-C(60)(*-) were lasting for 6-7 mus. In the medium polar solvent o-dichlorobenzene (o-DCB), ZnP-nT(*+)-C(60)(*-) and ZnP(*+)-nT-C(60)(*-) were present as an equilibrium, because both states have almost the same thermodynamic stability. This equilibrium resulted in quite long lifetimes of the CS states (450-910 mus) in o-DCB. In the more polar benzonitrile, the generation of ZnP-nT(*+)-C(60)(*-) was confirmed with apparent short lifetimes (0.6-0.8 mus), which can be explained by the fast hole shift to more stable ZnP(*+)-nT-C(60)(*-) followed by the faster charge recombination. It was revealed that the relation between the energy levels of two CS states, which strongly depend on the solvent polarity, causes dramatic changes of the lifetimes of the CS states in ZnP-nT-C(60); that is, the most appropriate solvents for the long-lived CS state are intermediately polar solvents such as o-DCB. Compared with our previous data for H(2)P-nT-C(60), in which H(2)P is free-base porphyrin, the lifetimes of the CS states of ZnP-nT-C(60) are approximately 30 times longer than those in o-DCB.     

Preparation of monodisperse SiO2 nanoparticles by membrane emulsification using ideally ordered anodic porous alumina

Monodisperse SiO2 particles of nanometer dimensions were fabricated by membrane emulsification using ideally ordered anodic porous alumina. For the preparation of monodisperse emulsion droplets, the dispersed phase was pressed through a porous alumina membrane into the continuous phase. After solidification treatment of the emulsion droplets, prepared spherical SiO2 nanoparticles with uniform sizes were obtained. From scanning electron microscope observation of the obtained particles, it was confirmed that the size distribution of SiO2 nanoparticles is relatively narrow.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.