The passivation phenomenon of platinum in fused lithium chloride + potassium chloride eutectic: Part II. Chlorine overpotential and superpassivation of platinum

Platinum is known to have a very high chlorine overpotential, about 0.8 V, in fused lithium chloride + potassium chloride eutectic. The high overpotential can be ascribed to the formation of the thick passivation film of platinum chlorides. The high chlorine overpotential was decreased by the addition of alkali metal oxides and a reversible chlorine evolution was revealed in a similar manner as the graphite electrode. The reversible chlorine evolution was ascribed to the formation of the oxide passivation film. The chlorine overpotential at the oxide film was increased stepwise as the applied potential was made more positive. The stepped transitions of the chlorine overpotential was ascribed to the valence change of the oxide film. Platinum shows a typical N-shaped passivation at +0.65 V versus Ag/AgCl(0.1) which has been ascribed to the dissolution of platinum into Pt(II) ions and following formation of the passivation film of supersaturated Pt(II) chloride. Platinum was found to show another passivation phenomenon at high temperatures, above 450°C. The N-shaped current-potential curve was observed at +1.8 V which was far more positive than the potential of the standard chlorine electrode. The dissolution of platinum prior to the passivation was found to occur due to the formation of high valence platinum ions such as Pt⁶⁺ and Pt⁸⁺.     

Calculations of the electrostatic free energy contributions to the binding free energy of sulfonamides to carbonic anhydrase

The interactions between biologically important enzymes and drugs are of great interest. In order to address some aspects of these interactions we have initiated a program to investigate enzymedrug interactions. Specifically, the interactions between one of the isozymes of carbonic anhydrase and a family of drugs known as sulfonamides have been studied using computational methods. In particular the electrostatic free energy of binding of carbonic anhydrase II with acetazolamide, methazolamide,p-chlorobenzenesulfonamide,p-aminobenzenesulfonamide and three new compounds (MK1, MK2, and MK3) has been computed using finite-difference Poisson-Boltzmann (FDPB) [1] method and the semimacroscopic version [2, 3] of the protein dipole Langevin dipole (PDLD) method [4]. Both methods, FDPB and PDLD, give similar results for the electrostatic free energy of binding even though different charges and different treatments were used for the protein. The calculated electrostatic binding free energies are in reasonable agreement with the experimental data. The potential and the limitation of electrostatic models for studies of binding energies are discussed.     

Crystal structure of a methyl(methoxy)carbene complex of nickel(II), trans-[Ni(C6Cl5)(PMe2Ph)2{C(OMe)Me}]BF4

The structure of a nickel(II) complex, trans-[Ni(C₆Cl₅)(PMe₂Ph)₂{C(OMe)Me}]BF₄, containing the simplest alkyl(alkoxy)carbene ligand has been determined by X-ray crystallography (R = 0.091). The geometry around the nickel atom is square-planar. The comparatively short NiC(1) bond length of 1.843(10) Å showed the presence of π-bonding in the nickel-carbene bond.     

Zirconium-mediated intramolecular ester transfer reaction: synthesis of alpha-substituted gamma-aminobutyric acid (GABA) derivatives

[reaction: see text]. The zirconium-mediated intramolecular ester transfer reaction of N-alkenyl carbamate derivatives proceeded to give alpha-substituted gamma-aminobutyric acid (GABA) derivatives in good to excellent yields. Quenching experiments of the reaction mixture with iodine or O2 indicated the presence of a cyclopropane intermediate. The resulting iodide was converted to 2-substituted pyrrolidine-3-carboxylate and/or alpha-alkylidene-gamma-aminobutyric acid derivatives in a stereospecific manner.     

Microcolumns with self-assembled particle frits for proteomics

LC-MS-MS experiments in proteomics are usually performed with packed microcolumns employing frits or outlets smaller than the particle diameter to retain the packing material. We have developed packed microcolumns using self-assembled particles (SAPs) as frits that are smaller than the size of the outlet. A five to one ratio of outlet size to particle diameter appears to be the upper maximum. In these situations the particles assembled into an arch over the outlet like the stones in a stone bridge. When 3 microm particles were packed into a tapered column with an 8 microm outlet, two particles bridged the outlet with 0.3 pl dead volume and perfect success rate. In peptide analysis by LC-MS, the peak width at half height was normally less than 6 s, compared to 12 s without SAPs. The LC-MS-MS system provided 37% sequence coverage (21 matched peptides) for a tryptically-digested sample of 10 fmol bovine serum albumin. We also describe application of the SAP principle to make disposable pipette tip columns with short pieces of fused-silica capillary as the outlet.     

Fast oxygen ion migration in Cu–In–oxide bulk and its utilization for effective CO2 conversion at lower temperature

Efficient activation of CO₂ at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures. Results show that a novel Cu–In₂O₃ structured oxide can show a remarkably higher CO₂ splitting rate than ever reported. Various analyses revealed that RWGS-CL on Cu–In₂O₃ is derived from redox between Cu–In₂O₃ and Cu–In alloy. Key factors for high CO₂ splitting rate were fast migration of oxide ions in the alloy and the preferential oxidation of the interface of alloy–In₂O₃ in the bulk of the particles. The findings reported herein can open up new avenues to achieve effective CO₂ conversion at lower temperatures.

Efficient activation of CO₂ at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures.     

Design and synthesis of spiro bis(1,2,3-triazolium) salts as chiral ionic liquids

Room temperature chiral spiro ionic liquids 1 and 2 based on 1,2,3-triazolium salts, were synthesized via an intramolecular double Huisgen reaction. The preparation of the enantiomerically pure spiro triazolium salts was achieved by resolution by HPLC using a chiral stationary phase column and subsequent N-dialkylations of spiro triazoles 6 and 10.     

Chiral bifunctional organocatalysts bearing a 1,3-propanediamine unit for the aza-MBH reaction

The introduction of a 1,3-propanediamine unit at the 3-position of (S)-BINOL using a methylene spacer led to the formation of a chiral bifunctional organocatalyst for the aza-Morita–Baylis–Hillman (aza-MBH) reaction. The organocatalyst 1k mediated aza-MBH transformations with high chemical yields and with up to 82% ee.