Nickel-catalyzed carboxylation of aryl and vinyl chlorides employing carbon dioxide

Nickel-catalyzed carboxylation of aryl and vinyl chlorides employing carbon dioxide has been developed. The reactions proceeded under a CO(2) pressure of 1 atm at room temperature in the presence of nickel catalysts and Mn powder as a reducing agent. Various aryl chlorides could be converted to the corresponding carboxylic acid in good to high yields. Furthermore, vinyl chlorides were successfully carboxylated with CO(2). Mechanistic study suggests that Ni(I) species is involved in the catalytic cycle.     

Photoelectrochemical conversion of toluene to methylcyclohexane as an organic hydride by Cu2ZnSnS4-based photoelectrode assemblies

Direct photoelectrochemical conversion of toluene (TL) to methylcyclohexane (MC) with water has been examined as an organic hydride conversion using light irradiation. The production of MC from TL was observed on Pt/CdS/Cu(2)ZnSnS(4)/Mo photoelectrodes with anion-type ionomer membrane assemblies. A cathodic photocurrent was observed below 0.7 V vs RHE (V(RHE)) in 0.1 M Na(2)SO(4)/NaOH (pH 9.5) aqueous solution, and an apparent photocurrent density of 0.5 mA cm(-2) was obtained at 0 V(RHE) under the irradiation of a 300 W Xe lamp with a 420 nm cutoff filter. The yield of MC was measured by gas chromatography, and an 88% faradaic efficiency was estimated. This study suggests the possibility of direct energy conversion from solar energy to MC as an energy carrier of organic hydrides.     

Conjugate gradient methods based on secant conditions that generate descent search directions for unconstrained optimization

Conjugate gradient methods have been paid attention to, because they can be directly applied to large-scale unconstrained optimization problems. In order to incorporate second order information of the objective function into conjugate gradient methods, Dai and Liao (2001) proposed a conjugate gradient method based on the secant condition. However, their method does not necessarily generate a descent search direction. On the other hand, Hager and Zhang (2005) proposed another conjugate gradient method which always generates a descent search direction.     

Soluble-insoluble-soluble transitions of aqueous poly(N-vinylacetamide-co-acrylic acid) solutions

Several poly(N-vinylacetamide-co-acrylic acid)s with various copolymer compositions have been synthesized, and their unique phase-transition behavior in aqueous salt (Na2SO4 or NaCl) solutions was investigated. Copolymers containing more than 51 mol % N-vinylacetamide (NVA) show reentrant soluble-insoluble-soluble transitions with increasing temperature. The soluble-insoluble transition temperature (T(p1)) increased linearly with increasing NVA content, whereas the insoluble-soluble transition temperature (T(p2)) was almost constant irrespective of the NVA content. Potentiometric titration of the copolymer solutions suggested that the acrylic acid (AA) carboxyl groups form hydrogen bonds with the NVA amide groups even under soluble conditions. Dehydration of the NVA amides and their consequent hydrogen bonding with the AA carboxyl groups during the soluble-insoluble transition process was indicated by FTIR measurements. Addition of salt (Na2SO4 or NaCl) to the aqueous media reduces the solvent quality and enhances the intra- and interchain interactions of the copolymers. Thus, T(p1) was observed to decrease and T(p2) was observed to increase with increasing salt concentration. However, the addition of urea to the media reverses the concentration dependence of T(p1) and T(p2) by disturbing the intra- and interchain interactions of the copolymers.     

Chiroptical activity of BINAP-stabilized undecagold clusters

Undecagold cluster compounds [Au11(BINAP)4X2]+ (X = Cl and Br) were synthesized by chemical reduction of the corresponding precursor complexes, Au2X2(BINAP), where BINAP represents the bidentate phosphine ligand 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl. The circular dichroism spectra of Au11 stabilized by the enantiomers [Au11(R-BINAP)4X2]+ and [Au11(S-BINAP)4X2]+ exhibited intense and mirror-image Cotton effect, whereas those of Au11(3+) clusters stabilized by achiral monodentate phosphine ligands did not. The origin of the chiroptical activity of [Au11(BINAP)4X2]+ is discussed in the context of the structural deformation of the Au11(3+) core.     

Effective detection of peptides containing cysteine sulfonic acid using matrix-assisted laser desorption/ionization and laser desorption/ionization on porous silicon mass spectrometry

Cysteine sulfonic acid-containing peptides, being typical acidic peptides, exhibit low response in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. In this study, matrix conditions and the effect of diammonium hydrogencitrate (DAHC) as additive were investigated for ionization of cysteine sulfonic acid-containing peptides in MALDI. A matrix-free ionization method, desorption/ionization on porous silicon (DIOS), was also utilized to evaluate the effect of DAHC. When equimolar three-component mixtures of peptides carrying free cysteine, cysteine sulfonic acid, and carbamidomethyl cysteine were measured by MALDI using a common matrix, alpha-cyano-4-hydroxycinnamic acid (CHCA), no signal corresponding to cysteine sulfonic acid-containing peptide could be observed in the mass spectrum. However, by addition of DAHC to CHCA, the peaks of cysteine sulfonic acid-containing peptides were successfully observed, as well as when using 2,4,6-trihydroxyacetophenone (THAP) and 2,6-dihydroxyacetophenone with DAHC. In the DIOS mass spectra of these analytes, the use of DAHC also enhanced the peak intensity of the cysteine sulfonic acid-containing peptides. On the basis of studies with these model peptides, tryptic digests of oxidized peroxiredoxin 6 were examined as a complex peptide mixture by MALDI and DIOS. In MALDI, the peaks of cysteine sulfonic acid-containing peptides were observed when using THAP/DAHC as the matrix, but this was not so with CHCA. In DIOS, the signal from cysteine sulfonic acid-containing peptides was suppressed; however, the use of DAHC significantly enhanced the signal intensity with an increase in the number of observed peptides and increased signal-to-noise ratio in the DIOS spectra. The results show that DAHC in the matrix or on the DIOS chip decreases discrimination and suppression effects in addition to suppressing alkali-adduct ions, which leads to a beneficial effect on protonation of peptides containing cysteine sulfonic acid.     

Synthesis and some properties of binuclear ruthenocenes bridged by oligoynes: formation of bis(cyclopentadienylidene)cumulene diruthenium complexes in the two-electron oxidation

The monoynes [Rc*C[triple bond]CRc*] and [Rc'C[triple bond]CRc'] were obtained in improved yields using [Mo(CO)6]/2-FC6H5OH as a catalyst in the alkyne metathesis of [Rc*C[triple bond]CMe] and [Rc'C[triple bond]CMe], respectively (Rc = ruthenocenyl, Rc* = 1',2',3',4',5'-pentamethylruthenocenyl, and Rc' = 2',3',4',5'-tetramethylruthenocenyl groups). The diynes [Rc*(C[triple bond]C)2Rc*] and [Rc'(C[triple bond]C)2Rc'] were synthesized by the oxidative coupling of the corresponding terminal ethynes in good yields. The triyne [Rc*(C[triple bond]C)3Rc*] and the tetrayne [Rc*(C[triple bond]C)4Rc*] were prepared by the hetero- and homocoupling of [Rc*C[triple bond]CC[triple bond]CH], which was obtained from the reaction of [Rc*C[triple bond]CCHO] with Li[N2CSiMe3], respectively. Although the oxidation waves did not always exhibit a clear two-electron oxidation process, the oxidation potentials shifted to a lower potential with an increase in the number of methyl substituents on the ruthenocenyl ring, and shifted to a higher potential with the increase in the number of C[triple bond]C units; this result is in contrast to that found in the [Rc(CH=CH)(n)Rc] series. The chemical oxidation of [Rc'C[triple bond]CRc'] yielded a stable two-electron-oxidized species, the structure of which was confirmed by X-ray crystallography to be [Ru2(mu2-eta(6):eta(6)-C5Me4C=CC5Me4)(eta-C5H5)2](BF4)2. Changing the substituents (Rc, Rc*, and Rc') had no effect on the chemical oxidation, but in the case of the Rc' series the Me substituent increased the stability of the two-electron-oxidized species in solution. The diyne [Rc*(C[triple bond]C)2Rc*] and the triyne [Rc*(C[triple bond]C)3Rc*] also gave a similar but unstable two-electron-oxidized species. In acetone or acetonitrile, the two-electron-oxidized species of [Rc*C[triple bond]CRc*] and [Rc*(C[triple bond]C)2Rc*] gradually formed the corresponding bis(fulvene)-type complexes. This implies that the two-electron-oxidized species of [Rc*(C[triple bond]C)(n)Rc*] are destabilized with the increasing n.     

2,7-diphenyl[1]benzoselenopheno[3,2-b][1]benzoselenophene as a stable organic semiconductor for a high-performance field-effect transistor

[1]Benzoselenopheno[3,2-b][1]benzoselenophene (BSBS) and its 2,7-diphenyl derivative (DPh-BSBS) were readily synthesized from diphenylacetylene and bis(biphenyl-4-yl)acetylene, respectively, with a newly developed straightforward selenocyclization protocol. In contrast to the parent BSBS that has poor film-forming properties, the diphenyl derivative DPh-BSBS formed a good thin film on the Si/SiO(2) substrate by vapor deposition. X-ray diffraction examination revealed that this film consists of highly ordered molecules that are nearly perpendicular to the substrate, making it suitable for use in the fabrication of organic field-effect transistors (OFETs). When fabricated at different substrate temperatures (room temperature, 60 degrees C, and 100 degrees C) in a "top-contact" configuration, all the DPh-BSBS-based OFET devices exhibited excellent p-channel field-effect properties with hole mobilities >0.1 cm(2) V(-1) s(-1) and current on/off ratios of approximately 10(6). This high performance was essentially maintained over 3000 continuous scans between V(g) = +20 and -100 V and reproduced even after storage under ambient laboratory conditions for at least one year.