Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).     

Novel type of heterogenized CuCl2 catalytic systems for oxidative carbonylation of methanol

A novel type of heterogenized CuCl₂ catalysts was designed for the oxidative carbonylation of methanol to dimethyl carbonate (DMC) taking account of the plausible reaction mechanism and intermediates. To prevent severe corrosion of the reaction equipment materials due to Cl^– while keeping the catalytic activity of the homogeneous CuCl₂ catalyst, we adopted, as supports (or ligands) of CuCl₂, four polymers, bearing a 2,2-bipyridine (bpy) or pyridine (py) unit, namely, poly(2,2-bipyridine-5,5-diyl) (Pbpy), poly(pyridine-2,5-diyl) (Ppy), poly(N,N-bisphenylene-2,2-bipyridine-4,4-dicarboxylic amide) (Bpya), and poly(4-methyl-4-vinyl-2,2-bipyridine) (Pvbpy), together with one chelate compound, 8-quinolinol. The catalytic activity, stability of heterogenized CuCl₂ and their corrosivities to stainless steels were examined in the liquid-phase reaction of the oxidative carbonylation of methanol. These polymer-supported catalysts showed considerable catalytic activity and stability for the DMC synthesis. In particular, the Pbpy-CuCl₂ and Ppy-CuCl₂ catalysts exhibited high DMC yields and selectivity comparable to those of the homogeneous CuCl₂ catalyst. This high activity appears to be associated with the presence of the -conjugated system in the polymers, which affect the redox reactions of Cu involved in the catalytic reaction. All of the polymer-supported CuCl₂ catalysts could be easily recycled after filtration, and the initial catalytic activity was maintained after three times of use. The corrosive characters of the catalysts were closely related to CuCl₂ leaching from the supports, which reflects the ability of supports to coordinate Cu. These experimental results suggest that both the electronic structure and the coordination ability of the polymer supports are key factors for the development of an effective catalytic system.     

Specifications of a neutron exposure accelerator system for biological effects experiments (NASBEE) in NIRS

We developed a neutron irradiation facility, neutron exposure accelerator system for biological effect experiments (NASBEE) for biological studies in National Institute of Radiological Sciences, Japan. Irradiation field of 2 MeV average neutrons generated by a Be(d–n)B reaction is established. Dose uniformity of 240 mm in diameter irradiation field is producible within ±2.5% with a dose rate of 0.87 Gy/h at sample target distance of 1170 mm. Two irradiation rooms, a specific pathogen-free (SPF) conditioned one and a conventional, are now available. Irradiation protocols for in vitro experiments are now established and demonstrated by obtaining a relative biological effectiveness (RBE) of cell inactivation measured to be 3.54 with 10% survival dose (D₁₀).     

Simple and sensitive quantification of bioactive peptides in biological matrices using liquid chromatography/selected reaction monitoring mass spectrometry coupled with trichloroacetic acid clean-up

A simple and sensitive liquid chromatography/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method has been developed for the quantification of bioactive peptides in biological fluids. The method employs protein precipitation with 4% trichloroacetic acid (TCA) and selected reaction monitoring (SRM) using an immonium ion as the product ion. This method was applied to determine the synthetic parathyroid hormone (PTH) analog (MW 1721) in rat plasma and human hepcidin-25 (MW 2789) in human serum. TCA clean-up showed a sufficient recovery for peptides with a MW of less than 3000, and would be useful as a simple and rapid method because of direct injection of the supernatant without evaporation or dilution. In addition, TCA clean-up allowed us not only to reduce sample preparation time, but also to select an immonium ion as a product ion of SRM, which led to detection more sensitive than SRM using other types of product ions. The lower limits of quantitation (LLOQs) of the PTH analog and the human hepcidin-25 were 0.2 ng/mL and 5 ng/mL, respectively. This method was fully validated with acceptable linearity, intra- and inter-assay precisions, and accuracy. Furthermore, this simple and rapid method is applicable to pharmacokinetic studies.     

Rational Design for Rotaxane Synthesis through Intramolecular Slippage: Control of Activation Energy by Rigid Axle Length

We describe a new concept for rotaxane synthesis through intramolecular slippage using π‐conjugated molecules as rigid axles linked with organic soluble and flexible permethylated α‐cyclodextrins (PM α‐CDs) as macrocycles. Through hydrophilic–hydrophobic interactions and flipping of PM α‐CDs, successful quantitative conversion into rotaxanes was achieved without covalent bond formation. The rotaxanes had high activation barrier for their de‐threading, so that they were kinetically isolated and derivatized even under conditions unfavorable for maintaining the rotaxane structures. ¹H NMR spectroscopy experiments clearly revealed that the restricted motion of the linked macrocycle with the rigid axle made it possible to control the kinetic stability by adjusting the length of the rigid axle in the precursor structure rather than the steric bulkiness of the stopper unit.     

Films Consisting of Innumerable Tapered Nanopillars of Mesoporous Silica for Universal Antireflection Coatings

Films with a fine structure consisting of innumerable nanopillars of mesoporous silica (MPS) are formed by a reactive ion etching process with a fluorine‐containing gas. Each nanopillar has a tapered shape with a uniform height, which effectively suppresses reflection by the formation of an ideal graded refractive index structure. The nanopillars are spontaneously formed under low‐pressure conditions, wherein locally deposited Al?F compounds, originating from an alumina plate in the etching chamber, work as a fine etching mask. The high etching rate of the MPS film allows a very high aspect ratio of the nanopillars. The refractive index of the MPS nanopillars can be universally tuned by a controlled incorporation of TiO₂ into the mesopores, which results in effective reduction of reflectance on a given substrate. The outstanding antireflection performance is experimentally demonstrated for glass substrates with a wide refractive index range.     

N-long-chain monoacylated derivatives of 2,6-diaminopyridine with antiviral activity

N-Monoacyl-2,6-diaminopyridines (2a-c) and N,N'-diacyl-2,6-diaminopyridines (3a-c) were synthesized from 2,6-diaminopyridine by acylation with the corresponding acyl halide or by dehydration with the corresponding carboxylic acid using 1,3-dicyclohexylcarbodiimide (DCC). The antiviral activities of N-monoacyl- and N,N'-diacyl-2,6-diaminopyridines (2a-c and 3a-c) were estimated using plaque reduction assay with HSV-1. All N-monoacyl derivatives (2a-c) showed significant anti-herpes simplex virus (HSV)-1 activity (EC(50) = 15.3-18.5 microg/ml). The CC(50) values of 2a-c measured using Vero cells ranged at 37.5-50.0 microg/ml. These compounds showed no significant antibacterial activities with Escherichia coli or Staphylococcus aureus even at a concentration of 1 mg/ml. The N,N'-diacyl derivatives (3a-c) showed no significant anti-HSV-1 activity.     

Array of aromatic amino acid side chains located near the chromophore of photoactive yellow protein

The role of the array of aromatic amino acid side chains located close to the chromophore binding loop of photoactive yellow protein (PYP) was studied using the alanine-substitution mutagenesis. Phe92, Tyr94, Phe96 and Tyr98 were replaced with alanine (F92A, Y94A, F96A and Y98A, respectively), then these mutants were characterized by UV-visible absorption spectra, circular dichroism (CD) spectra, thermal stability and photocycle kinetics. Absorption maxima of F92A, Y94A, F96A and Y98A were 444, 442, 439 and 447 nm, respectively, different to wild type (WT) at 446 nm. Far-UV CD spectra of mutants other than F92A were different from WT, indicating that Tyr94, Phe96 and Tyr98 maintain the native secondary structure of PYP. Mid-point temperatures of thermal denaturation of F92A, Y94A and F96A, estimated by the CD signal at 222 nm, were 5-10 degrees C lower than WT. Time constants of the photocycle estimated by flash-induced absorbance change were 0.36 s for WT and 1.4 s for Y98A, however, 100, 30 and 3000 times slower than WT for F92A, Y94A and F96A, respectively. Tyr98 is located in the loop region, whereas Phe92, Tyr94 and Phe96 are incorporated in the beta4 strand, showing that aromatic amino acid residues in the beta-sheet regulate the absorption spectrum, thermal stability and photocycle of PYP. Aromatic rings of Phe92, Tyr94 and Phe96 lie nearly perpendicular to the aromatic ring of Phe75 or chromophore. Possible weak hydrogen bonds between the aromatic ring hydrogen and pi-electrons of these residues are discussed.