Endoscopic Observation of Tissue by Narrowband Illumination

We propose a new illumination method for a medical endoscope: narrow band imaging (NBI), in which the spectral bandwidth of the filtered light is narrowed. To confirm how the spectral specifications of the filtered light influence a reproduced image, an experiment was conducted observing the endoscopic images of the back mucosa of a human tongue. In addition, the effect of NBI on endoscopic images was investigated through preliminary clinical tests in colonoscopy and upper gastrointestinal endoscopy. It has been shown that NBI can enhance the capillary pattern and the crypt pattern on the mucosa. These patterns are useful features for diagnosing an early cancer.     

Measurements of branching fractions for B --> K pi and B --> pi pi decays

We report measurements of branching fractions for B --> K pi and B --> pi pi decays based on a data sample of 449 x 10(6) BB[over] pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. We also measure the ratios of partial widths for B-->Kpi decays, namely R(c) identical with 2Gamma(B(+) --> K(+) pi(0))/Gamma(B(+) --> K(0) pi(+)) = 1.08+/-0.06+/-0.08 and R(n) identical with Gamma(B(0) --> K(+) pi(-))/2 Gamma(B(0) --> K(0) pi(0)) = 1.08+/-0.08+/-0.08, where the first and the second errors are statistical and systematic, respectively. These ratios are sensitive to enhanced electroweak penguin contributions from new physics; the new measurements are, however, consistent with standard model expectations.     

Measurement of inclusive Ds, D0, and J/psi rates and determination of the Bs(*)Bs(*) production fraction in bb Events at the Upsilon(5S) resonance

The inclusive production of D(s), D(0), and J/psi mesons is studied using a 1.86 fb(-1) data sample collected on the Upsilon(5S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. The number of bb events in this Upsilon(5S) data sample is determined. We measure the branching fractions B(Upsilon(5S)-->D(s)X)/2=(23.6+/-1.2+/-3.6)%, B(Upsilon(5S)-->D(0)X)/2=(53.8+/-2.0+/-3.4)%, and B(Upsilon(5S)-->J/psiX)/2=(1.030+/-0.080+/-0.067)%. From the D(s) and D(0) inclusive branching fractions the ratio f(s)=(18.0+/-1.3+/-3.2)% of B(s)(*)B(s)(*) to the total bb quark pair production at the Upsilon(5S) energy is obtained in a model-dependent way.     

HL-2A tokamak disruption forecasting based on an artificial neural network

Artificial neural networks are trained to forecast the plasma disruption in HL-2A tokamak. Optimized network architecture is obtained. Saliency analysis is made to assess the relative importance of different diagnostic signals as network input. The trained networks can successfully detect the disruptive pulses of HL-2A tokamak. The results obtained show the possibility of developing a neural network predictor that intervenes well in advance for avoiding plasma disruption or mitigating its effects.     

First results from KamLAND: evidence for reactor antineutrino disappearance

KamLAND has measured the flux of nu;(e)'s from distant nuclear reactors. We find fewer nu;(e) events than expected from standard assumptions about nu;(e) propagation at the 99.95% C.L. In a 162 ton.yr exposure the ratio of the observed inverse beta-decay events to the expected number without nu;(e) disappearance is 0.611+/-0.085(stat)+/-0.041(syst) for nu;(e) energies >3.4 MeV. In the context of two-flavor neutrino oscillations with CPT invariance, all solutions to the solar neutrino problem except for the "large mixing angle" region are excluded.     

Design and Evaluation of Computer Generated Hologram with Binary Subwavelength Structure Designed by Deterministic Process

A binary subwavelength structure for multilevel phase modulation can be designed by our previously proposed deterministic design method without iterative optimization method. To use our design technique in various applications of a computer generated hologram (CGH) like an array illuminator, beam-shaping, signal processing, and so on, an image quality of a reconstructed image from a CGH has become much more important. In this paper, we verify the image quality of a reconstructed image from a CGH designed by our method in terms of the modulation transfer function (MTF) and the spatial resolution. Simulation results show that our technique can theoretically achieve a MTF of more than 99% over a wide range and a spatial resolution of less than 9.66μm.     

Development of measuring magnetic Compton profiles by grazing incidence geometry

A novel technique of measuring a magnetic Compton profile using the grazing angle geometry against a sample surface (Grazing Incidence Magnetic Compton Profile) has been successively developed. Measurements of a magnetic moment and a magnetic Compton profile are possible for a Fe 200 nm film on a thick glass substrate. The estimated thinnest limit for measurements is 100 nm for a Fe film.     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Back-to-back correlations of high-p(T) hadrons in relativistic heavy-ion collisions

We investigate the suppression factor and the azimuthal correlation function for high p(T) hadrons in central Au+Au collisions at sqrt[s(NN)]=200 GeV by using a dynamical model in which hydrodynamics is combined with explicitly traveling jets. We study the effects of parton energy loss in a hot medium, intrinsic k(T) of partons in a nucleus, and p (perpendicular) broadening of jets on the back-to-back correlations of high p(T) hadrons. Parton energy loss is found to be a dominant effect on the reduction of the awayside peaks in the correlation function.     

Crosstalk Suppression in Header Recognition Unit Using Time-Space Conversion

We demonstrate a suppression effect of a crosstalk among a target and similar header signals using the header recognition filter designed by a design technique of the multiple-object discriminant filter.