Enhancing the Cellulose-Degrading Activity of Cellulolytic Bacteria CTL-6 (Clostridium thermocellum) by Co-Culture with Non-cellulolytic Bacteria W2-10 (Geobacillus sp.)

The effect of a non-cellulolytic bacterium W2-10 (Geobacillus sp.) on the cellulose-degrading activity of a cellulolytic bacterium CTL-6 (Clostridium thermocellum) was determined using cellulose materials (paper and straw) in peptone cellulose solution (PCS) medium under aerobic conditions. The results indicated that in the co-culture, addition of W2-10 resulted in a balanced medium pH, and may provide the required anaerobic environment for CTL-6. Overall, addition of W2-10 was beneficial to CTL-6 growth in the adverse environment of the PCS medium. In co-culture with W2-10, the CTL-6 cellulose degradation efficiency of filter paper and alkaline-treated wheat straw significantly increased up to 72.45 and 37.79 %, respectively. The CMCase activity and biomass of CTL-6 also increased from 0.23 U ml^?1 and 45.1 μg ml^?1 (DNA content) up to 0.47 U ml^?1 and 112.2 μg ml^?1, respectively. In addition, co-culture resulted in accumulation of acetate and propionate up to 4.26 and 2.76 mg ml^?1. This was a respective increase of 2.58 and 4.45 times, in comparison to the monoculture with CTL-6.     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).     

Structural development of ultra‐high strength polyethylene fibers: Transformation from kebabs to shishs through hot‐drawing process of gel‐spun fibers

Structural development of ultra‐high strength polyethylene fibers via hot‐drawing processes of as‐spun gel fibers was investigated by means of transmission electron microscopy. It is found that the shish‐kebabs developed in both the as‐spun and drawn fibers can be transformed continuously into the micro‐fibril structure composed mostly of the shish structure through the hot‐drawing process. The structure transformation involves a drastic decrease in diameter of the kebab plus the shish but almost no change in the shish diameter. This result suggests that the chains in the kebabs are incorporated into the shishs and consumed to extend the longitudinal dimension of the shishs during the drawing process. The proposed new deformation model well explains the relationship between the fiber morphology and their mechanical properties: the tensile strength and modulus of the fibers can be determined by the number of the shish in the fiber and the macroscopic diameter of the fiber, which are apriori determined at the spinning process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1861–1872, 2010     

In-Line Reactions and Ionizations of Vaporized Diphenylchloroarsine and Diphenylcyanoarsine in Atmospheric Pressure Chemical Ionization Mass Spectrometry

We propose detecting a fragment ion (Ph₂As⁺) using counter-flow introduction atmospheric pressure chemical ionization ion trap mass spectrometry for sensitive air monitoring of chemical warfare vomiting agents diphenylchloroarsine (DA) and diphenylcyanoarsine (DC). The liquid sample containing of DA, DC, and bis(diphenylarsine)oxide (BDPAO) was heated in a dry air line, and the generated vapor was mixed into the humidified air flowing through the sampling line of a mass spectrometer. Humidity effect on the air monitoring was investigated by varying the humidity of the analyzed air sample. Evidence of the in-line conversion of DA and DC to diphenylarsine hydroxide (DPAH) and then BDPAO was obtained by comparing the chronograms of various ions from the beginning of heating. Multiple-stage mass spectrometry revealed that the protonated molecule (MH⁺) of DA, DC, DPAH, and BDPAO could produce Ph₂As⁺ through their in-source fragmentation. Among the signals of the ions that were investigated, the Ph₂As⁺ signal was the most intense and increased to reach a plateau with the increased air humidity, whereas the MH⁺ signal of DA decreased. It was suggested that DA and DC were converted in-line into BDPAO, which was a major source of Ph₂As⁺.

Open image in new window

Graphical Abstract ?

     

Flux decline behaviors in dead-end microfiltration of activated sludge and its supernatant

The properties of dead-end microfiltration were explored under constant pressure using two types of activated sludge controlled under the condition of different air flow rates. The activated sludge cultured at the air flow rate of 0.15 L min⁻¹ (the anaerobic condition) exhibited a significant flux decline compared with the case of the air flow rate of 2.33 L min⁻¹ (the aerobic condition). It was found from the results of microfiltration of the supernatant separated by centrifugation that the constituents in the supernatant caused a major cake resistance in microfiltration of the activated sludge. The average specific filtration resistance for filtration of the activated sludge was closely consistent with that for filtration of the supernatant at low pressure (49 kPa). However, the cake resistance of the microbial floc in microfiltration of the activated sludge became substantial with increasing filtration pressure because of high compressibility of the microbial floc. Moreover, the foulant and the fouling mechanism in microfiltration of the supernatant were evaluated from both microfiltration test of the supernatant and microfiltration test of the filtrate collected thereby. As a result, the effects of the pore size and material of the microfiltration membrane on the flux decline behaviors in dead-end microfiltration were reasonably elucidated.     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Development of fast disintegrating compressed tablets using amino acid as disintegration accelerator: evaluation of wetting and disintegration of tablet on the basis of surface free energy

A fast disintegrating compressed tablet was formulated using amino acids, such as L-lysine HCl, L-alanine, glycine and L-tyrosine as disintegration accelerator. The tablets having the hardness of about 4 kgf were prepared and the effect of amino acids on the wetting time and disintegration time in the oral cavity of tablets was examined on the basis of surface free energy of amino acids. The wetting time of the tablets increased in the order of L-lysine HCl, L-alanine, glycine and L-tyrosine, whereas the disintegration time in the oral cavity of the tablets increased in the order of L-alanine, glycine, L-lysine HCl and L-tyrosine. These behaviors were well analyzed by the introduction of surface free energy. When the polar component of amino acid was large value or the dispersion component was small value, faster wetting of tablet was observed. When the dispersion component of amino acid was large value or the dispersion component was small value, faster disintegration of tablet was observed, expect of L-tyrosine tablet. The fast disintegration of tablets was explained by the theory presented by Matsumaru.     

Synthesis of stable and cell-type selective analogues of cyclic ADP-ribose, a Ca(2+)-mobilizing second messenger. Structure--activity relationship of the N1-ribose moiety

We previously developed cyclic ADP-carbocyclic ribose (cADPcR, 2) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca(2+)-mobilizing second messenger. A series of the N1-ribose modified cADPcR analogues, designed as novel stable mimics of cADPR, which were the 2"-deoxy analogue 3, the 3"-deoxy analogue 4, the 3"-deoxy-2"-O-(methoxymethyl) analogue 5, the 3"-O-methyl analogue 6, the 2",3"-dideoxy analogue 7, and the 2",3"-dideoxydidehydro analogue 8, were successfully synthesized using the key intramolecular condensation reaction with phenylthiophosphate-type substrates. We investigated the conformations of these analogues and of cADPR and found that steric repulsion between both the adenine and N9-ribose moieties and between the adenine and N1-ribose moieties was a determinant of the conformation. The Ca(2+)-mobilizing effects were evaluated systematically using three different biological systems, i.e., sea urchin eggs, NG108-15 neuronal cells, and Jurkat T-lymphocytes. The relative potency of Ca(2+)-mobilization by these cADPR analogues varies depending on the cell-type used: e.g., 3"-deoxy-cADPcR (4) > cADPcR (2) > cADPR (1) in sea urchin eggs; cADPR (1) > cADPcR (2) approximately 3"-deoxy-cADPcR (4) in T-cells; and cADPcR (2) > cADPR (1) > 3"-deoxy-cADPcR (4) in neuronal cells, respectively. These indicated that the target proteins and/or the mechanism of action of cADPR in sea urchin eggs, T-cells, and neuronal cells are different. Thus, this study represents an entry to cell-type selective cADPR analogues, which can be used as biological tools and/or novel drug leads.