Carbon-13 NMR spectra of all-trans-N-retinylidene-n-butylamine as an analogue of the Schiff's base linkage-compound in visual pigment

Carbon-13 NMR spectra have been obtained for all-trans-N-retinylidene-n-butylamine as an analogue of the Schiff's base linkage compound in visual pigment. The chemical shift changes on going from all-trans-retinal₁ to all-trans-N-retinylidene-n-butylamine are observed. These changes indicate the collapse of the bond alternation in conjugated polyene carbons, whereas N-protonation in all-trans-N-retinylidene-n-butylamine does not affect the bond alternation.     

Photochemical vapor deposition of amorphous silicon through 185 nm excitation of monosilane

Photochemical vapor deposition of a-Si films at a high rate using SiH₄ and a 185 nm low pressure mercury lamp is described. A maximum rate of 1 nm/sec was attained using the 185 nm lamp. This rate was about ten times higher than that using a 254 nm lamp. Assuming that there is no interaction between the effects of the two wavelengths, the deposition rate per light output power of 184.9 nm light is 160 times larger than that for 253.7 nm light. The absorption cross-section of the 184.9 nm light is ten times greater than that for the 253.7 nm light.     

Effect of temporal resolution on the estimation of left ventricular function by cardiac MR imaging

The aim of this study was to investigate the effect of temporal resolution on the estimation of left ventricular (LV) function by cardiac magnetic resonance (MR) imaging using a steady-state free precession (SSFP) sequence. Left ventricular function was assessed by cine MR imaging using a segmented SSFP sequence in 10 healthy volunteers. Views per segment (VPS) were set at 8 and 20, resulting in high and low true temporal resolution, respectively. Irrespective of VPS, images were reconstructed at 40 cardiac phases, providing high apparent temporal resolution. Data were analyzed using 40, 20 and 10 phases to simulate different apparent temporal resolutions. Increasing the cardiac phases used for analysis slightly decreased mean end-systolic volume (ESV) and slightly increased mean ejection fraction (EF). No substantial difference in estimates of end-diastolic volume (EDV) was found between VPSs of 8 and 20. Imaging with a VPS of 20 yielded a larger ESV and smaller EF than imaging with a VPS of 8 when 40 phases were used. In conclusion, low true temporal resolution causes overestimation of ESV and underestimation of EF. Improvement of apparent temporal resolution mildly reduces but does not eliminate the errors caused by low true temporal resolution.     

Production of doubly charged helium ions by two-photon absorption of an intense sub-10-fs soft x-ray pulse at 42 eV photon energy

We report on the observation of doubly charged helium ions produced by a nonlinear interaction between a helium atom and photons with a photon energy of 42 eV which are generated with the 27th harmonic of a femtosecond pulse from a Ti:sapphire laser. The number of ions is proportional to the square of the intensity of the 27th harmonic pulse, and thus two-photon double ionization should be dominantly induced as compared with other nonlinear processes accompanying sequential ionization via a singly charged ion. This phenomenon is utilized to measure the pulse duration of the 27th harmonic pulse by using an autocorrelation technique, for the first time to our knowledge, and as a result a duration of 8 fs is found.     

Thermal splitting of Bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) into two Cu(II) porphyrins

When heated, bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) is quantitatively split into two Cu(II) porphyrins both in solution and film states, which is accompanied by large absorption spectral changes.     

Effect of moisture on impact toughness of sugar-coated tablets manufactured by the dusting method

The purpose of this study was to clarify the effect of moisture on the impact toughness of sugar-coated tablets manufactured by the dusting method. We demonstrated that moisture plays an important role in the impact toughness of sugar-coated tablets. Moisturizing the sugar-coating layer resulted in enhancement of impact toughness of sugar-coated tablets, while reducing moisture in the sugar-coating layer resulted in weakening of the impact toughness. This was due to the characteristics of sucrose, the main ingredient of the sugar-coating layer, which is a soft and non-fragile material at high moisture levels, but hard and fragile at low moisture levels. We also demonstrated that friability as an indicator of impact toughness changed with time, and friability should be measured at 14 d after manufacture. This is due to moisture movement from outer sugar-coating layer into the inner sugar-coated tablets. Incorporating microcrystalline cellulose (MCC) in the subcoating layer resulted in sugar-coating layers with high resistance against impact even though moisture content of sugar-coated tablets was low. We confirmed the high impact toughness of the sugar-coated tablets with MCC whose moisture content was low from the results of both free fall and friability tests. We suggest that the dusting method using dusting powder containing MCC is a useful method for the production of sugar-coated tablets containing moisture sensitive drugs.     

Reliability of mean transit time obtained using perfusion-weighted MR imaging; comparison with positron emission tomography

The purpose of this project was to assess the reliability of the cerebral mean transit time (MTT) obtained using perfusion-weighted MR imaging by comparing it with the MTT obtained when performing positron emission tomography (PET). Ten patients with chronic occlusive cerebrovascular disease were investigated. They had either unilateral internal carotid artery occlusion or middle cerebral artery occlusion. The regions-of-interest were placed in non-infarcted areas within the territory of the middle cerebral artery on the affected side. Control regions-of-interest were placed in mirrored regions of the contralateral side. Linear regression analyses were performed using the parameters of the MTT obtained with perfusion-weighted MR imaging and the MTT, cerebral blood flow, vascular reactivity, and oxygen extraction fraction obtained with PET. The respective MTTs of the affected and non-affected sides obtained with perfusion-weighted MR imaging versus those with PET were 7.3 +/- 2.2 s and 6.0 +/- 1.2 s versus 8.2 +/- 3.0 s and 6.4 +/- 1.7 s. The MTT obtained using perfusion-weighted MR imaging and PET demonstrated statistically significant correlation (r = 0.87, p < 0.0001). The MTT obtained with perfusion-weighted MR imaging correlated statistically with cerebral blood flow (r = -0.74, p < 0.001), vascular reactivity (r = -0.73, p < 0.001) and oxygen extraction fraction (r = 0.61, p < 0.01). Similarly, the MTT obtained using PET statistically correlated with cerebral blood flow (r = -0.78, p < 0.0001), vascular reactivity (r = -0.51, p < 0.05) and oxygen extraction fraction (r = 0.68, p < 0.01). The reliability of the MTT obtained using perfusion-weighted MR imaging appears to be approximately equal to that obtained with positron emission tomography.     

Intramolecular cyclization with nitrenium ions generated by treatment of N-acylaminophthalimides with hypervalent iodine compounds: formation of lactams and spiro-fused lactams

N-Phthalimido-N-acylnitrenium ions are generated from N-acylaminophthalimides, a new class of precursors, by treatment with hypervalent iodine compounds (PIFA and HTIB). In HFIP, the nitrenium ions undergo intramolecular electrophilic substitution reactions to afford N-aminonitrogen heterocycles in high yields. In TFEA, spirodienones bearing the 1-azaspiro[4.5]decane skeleton are obtained by treatment of N-phthalimido-3-(4-halogenophenyl)propanamides with HTIB as a result of ipso attack of the intermediate nitrenium ion. Similarly, using PIFA in TFEA, ipso cyclization of unactivated benzenoid compounds occurs to afford spirodiene derivatives. This involves loss of aromaticity despite the absence of other activating substituents on the phenyl group.