Time-resolved fluorometric analysis of carbohydrates labeled with amino-aromatic compounds by reductive amination

We examined the formation of complexes between terbium ion (Tb3+) and carbohydrates labeled with aminobenzene compounds. Of the examined compounds, carbohydrates labeled with 4-aminosalicylic acid showed intense fluorescence with Tb3+ in the presence of cetylpyridinium chloride at pH 6.0. Calibration curves for maltose derivative showed good linearity between 5 pmol and at least 600 pmol, with good reproducibility. We applied the proposed technique to binding studies between manno-oligosaccharides and Concanavalin A.     

LET distributions from CR-39 plates on Space Shuttle missions STS-84 and STS-91 and a comparison of the results of the CR-39 plates with those of RRMD-II and RRMD-III telescopes

The LET distributions during the Space Shuttle missions STS-84 (altitude 270-412 km, average 375 km; inclination angle, 51.6 degrees) and STS-91 (altitude 328-397 km, average 373 km; inclination angle, 51.6 degrees) were measured using CR-39 plastic nuclear track detectors. A correction for the dip-angle dependence of the track-formation sensitivity of the CR-39 plates was applied to the data analysis. The absorbed doses and the dose equivalents around RRMD Detector Units, estimated from the LET distributions in the LET region of 4-200 keV/micrometers, fluctuated with standard deviations of +/- 21% to +/- 35% in both flight experiments. The LET distributions obtained from the CR-39 plates agreed well with that obtained from RRMD-II in STS-91. However, the particle fluxes obtained from RRMD-III in STS-84 and STS-91 were two or three times higher than those obtained from RRMD-II and the CR-39 plates. It was concluded that the LET distributions obtained from RRMD-II and the CR-39 plates in the present flight experiments did not include the contribution of target-fragmented secondary heavy particles produced by low-LET particles, such as relativistic or semi-relativistic protons and helium ions, whereas RRMD-III was able to detect these secondary particles because of its low triggering level.     

Reply to the note on the flow behaviour of combustion gas in the boundary layer of an MHD generator

The temperature profile in Fig. 3 of Ref. 1 is better approximated by a relation for a turbulent boundary layer than a laminar boundary layer. The critical Reynolds number is expected to be lowered in the flow train of MHD combustion gas because of large turbulence in the combustor and by roughness along the duct.     

Carbon-13 NMR spectra of all-trans-N-retinylidene-n-butylamine as an analogue of the Schiff's base linkage-compound in visual pigment

Carbon-13 NMR spectra have been obtained for all-trans-N-retinylidene-n-butylamine as an analogue of the Schiff's base linkage compound in visual pigment. The chemical shift changes on going from all-trans-retinal₁ to all-trans-N-retinylidene-n-butylamine are observed. These changes indicate the collapse of the bond alternation in conjugated polyene carbons, whereas N-protonation in all-trans-N-retinylidene-n-butylamine does not affect the bond alternation.     

Photochemical vapor deposition of amorphous silicon through 185 nm excitation of monosilane

Photochemical vapor deposition of a-Si films at a high rate using SiH₄ and a 185 nm low pressure mercury lamp is described. A maximum rate of 1 nm/sec was attained using the 185 nm lamp. This rate was about ten times higher than that using a 254 nm lamp. Assuming that there is no interaction between the effects of the two wavelengths, the deposition rate per light output power of 184.9 nm light is 160 times larger than that for 253.7 nm light. The absorption cross-section of the 184.9 nm light is ten times greater than that for the 253.7 nm light.     

Production of doubly charged helium ions by two-photon absorption of an intense sub-10-fs soft x-ray pulse at 42 eV photon energy

We report on the observation of doubly charged helium ions produced by a nonlinear interaction between a helium atom and photons with a photon energy of 42 eV which are generated with the 27th harmonic of a femtosecond pulse from a Ti:sapphire laser. The number of ions is proportional to the square of the intensity of the 27th harmonic pulse, and thus two-photon double ionization should be dominantly induced as compared with other nonlinear processes accompanying sequential ionization via a singly charged ion. This phenomenon is utilized to measure the pulse duration of the 27th harmonic pulse by using an autocorrelation technique, for the first time to our knowledge, and as a result a duration of 8 fs is found.     

Thermal splitting of Bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) into two Cu(II) porphyrins

When heated, bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) is quantitatively split into two Cu(II) porphyrins both in solution and film states, which is accompanied by large absorption spectral changes.     

Effect of moisture on impact toughness of sugar-coated tablets manufactured by the dusting method

The purpose of this study was to clarify the effect of moisture on the impact toughness of sugar-coated tablets manufactured by the dusting method. We demonstrated that moisture plays an important role in the impact toughness of sugar-coated tablets. Moisturizing the sugar-coating layer resulted in enhancement of impact toughness of sugar-coated tablets, while reducing moisture in the sugar-coating layer resulted in weakening of the impact toughness. This was due to the characteristics of sucrose, the main ingredient of the sugar-coating layer, which is a soft and non-fragile material at high moisture levels, but hard and fragile at low moisture levels. We also demonstrated that friability as an indicator of impact toughness changed with time, and friability should be measured at 14 d after manufacture. This is due to moisture movement from outer sugar-coating layer into the inner sugar-coated tablets. Incorporating microcrystalline cellulose (MCC) in the subcoating layer resulted in sugar-coating layers with high resistance against impact even though moisture content of sugar-coated tablets was low. We confirmed the high impact toughness of the sugar-coated tablets with MCC whose moisture content was low from the results of both free fall and friability tests. We suggest that the dusting method using dusting powder containing MCC is a useful method for the production of sugar-coated tablets containing moisture sensitive drugs.     

Reliability of mean transit time obtained using perfusion-weighted MR imaging; comparison with positron emission tomography

The purpose of this project was to assess the reliability of the cerebral mean transit time (MTT) obtained using perfusion-weighted MR imaging by comparing it with the MTT obtained when performing positron emission tomography (PET). Ten patients with chronic occlusive cerebrovascular disease were investigated. They had either unilateral internal carotid artery occlusion or middle cerebral artery occlusion. The regions-of-interest were placed in non-infarcted areas within the territory of the middle cerebral artery on the affected side. Control regions-of-interest were placed in mirrored regions of the contralateral side. Linear regression analyses were performed using the parameters of the MTT obtained with perfusion-weighted MR imaging and the MTT, cerebral blood flow, vascular reactivity, and oxygen extraction fraction obtained with PET. The respective MTTs of the affected and non-affected sides obtained with perfusion-weighted MR imaging versus those with PET were 7.3 +/- 2.2 s and 6.0 +/- 1.2 s versus 8.2 +/- 3.0 s and 6.4 +/- 1.7 s. The MTT obtained using perfusion-weighted MR imaging and PET demonstrated statistically significant correlation (r = 0.87, p < 0.0001). The MTT obtained with perfusion-weighted MR imaging correlated statistically with cerebral blood flow (r = -0.74, p < 0.001), vascular reactivity (r = -0.73, p < 0.001) and oxygen extraction fraction (r = 0.61, p < 0.01). Similarly, the MTT obtained using PET statistically correlated with cerebral blood flow (r = -0.78, p < 0.0001), vascular reactivity (r = -0.51, p < 0.05) and oxygen extraction fraction (r = 0.68, p < 0.01). The reliability of the MTT obtained using perfusion-weighted MR imaging appears to be approximately equal to that obtained with positron emission tomography.