Cyclopalladation of the indole ring in palladium(II) complexes of 2N1O-donor ligands and its dependence on the O-donor properties

Synthetic, structural, spectroscopic, and kinetic studies have been carried out on the Pd(II) complexes of new 2N1O-donor ligands containing a pendent indole, 3-(N-2-pyridylmethyl-N-2-hydroxy-5-methoxybenzylamino)ethylindole (HMeO-iepp), 3-(N-2-pyridylmethyl-N-2-hydroxy-5-nitrobenzylamino)ethylindole (HNO2-iepp), and (N-2-pyridylmethyl-3-indolylethylamino)acetic acid (Hiepc) (H denotes a dissociable proton). [Pd(MeO-iepp)Cl] (2), [Pd(NO2-iepp)Cl] (3), and [Pd(iepc)Cl] (4) were prepared and revealed by X-ray analysis to have a pyridine nitrogen, an amine nitrogen, a phenolate or carboxylate oxygen, and a chloride ion in the coordination plane. UV absorption and 1H NMR spectral changes indicated that all the complexes could be converted to the indole-binding complexes where the O donor was replaced by the indole C2 atom by cyclopalladation in DMSO or DMF in the temperature range of 40-60 degrees C. Formation of the indole-binding complex species obeyed the first-order kinetics, from which the activation parameters were estimated. The formation rate was dependent on the properties of the O-donor group, a lower pKa value of its conjugate acid causing faster conversion to the indole-binding species in the order 2 (methoxyphenolate) < 3 (nitrophenolate) < 4 (carboxylate). On the other hand, the ratio of the indole-binding complex to the O-donor complex as a result of the conversion was greater for the complexes with a higher pKa value of the ligand OH group, the order being 2 > 3 > 4.     

Corrigendum to “Constraints on operator ordering from third quantization” [Ann. Phys. 365 (2016) 54–65]

In our previous paper Ohkuwa et al. (2016) corrigendum was found in Eqs. (3.4) and (3.6). However, conclusions of our previous paper are not changed.     

Stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry for trace analysis of triclosan in water sample

A simple and highly sensitive method called stir bar sorptive extraction (SBSE) and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan) in river water samples, is described. A stir bar coated with polydimethylsiloxane (PDMS) is added to a 10mL water sample and stirring is carried out for 120min at room temperature (25 degrees C) in a vial. Then, the PDMS stir bar is subjected to TD-GC-MS. The detection limit of triclosan is 5ngL(-1) (ppt). The method shows linearity over the calibration range (0.02-20mugL(-1)) and the correlation coefficient is higher than 0.997 for triclosan standard solution. The recovery of triclosan in river water samples ranges from 91.9 to 108.3% (RSD: 4.0-7.0%). This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of triclosan in river water samples.     

Analysis on heat stress-induced hyperphosphorylation of stathmin at serine 37 in Jurkat cells by means of two-dimensional gel electrophoresis and tandem mass spectrometry

Two-dimensional gel electrophoresis (2-DE) and tandem mass spectrometry were successfully used for determination of a phosphorylation site of stathmin induced by heat stress to Jurkat cells of a human T lymphoblastic cell line. The cells were incubated for 30 min at 41 degrees C up to 45 degrees C in a serum free 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffered culture medium. The intracellular soluble proteins were separated by 2-DE, and some of the proteins increased their abundance by heat stress. Those proteins were identified to be calmodulin, protein kinase C substrate, thymosin beta-4 and F-actin capping protein beta-subunit by peptide mass fingerprinting (PMF) with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). On the contrary, protein phosphatase 2C gamma-isoform, nucleophosmin, translationally controlled tumor protein, Rho GDP-dissociation inhibitor-1, eukaryotic translation initiation factors 5A and 3A subunit 2, ubiquitin-like protein SMT 3B and chloride intracellular channel protein-1 were decreased their abundance. A protein spot of M(r) 18,000 and pI 5.9 was markedly increased at temperatures higher than 43 degrees C at which the cells were led to apoptosis. The spot was identified to be stathmin of a signal relay protein which has a function of sequestering microtubule. MALDI-quadrupole ion trap (QIT)-TOF-MS/MS and immunoblotting with a monoclonal antibody specific for a phosphorylation site of stathmin showed that the spot was a phosphorylated stathmin at serine 37 (Ser 37). The phosphorylation was suppressed by treatment of cells with olomoucine of an inhibitor specific for cyclin dependent kinase (Cdk-1). These results strongly suggest that heat stress activates Cdk-1 which phosphorylates Ser 37 on the stathmin molecule. The phosphorylation may cause the functional loss of stathmin for dynamic microtubule assembly and leads Jurkat cells to cell cycle arrest and apoptosis.     

Aryl-aryl coupling reaction using a novel and highly active palladium reagent prepared from Pd(OAc)2, 1,3-bis[diphenylphosphino]propane (DPPP), and Bu3P

A palladium-assisted coupling reaction of aryl triflate with arene was investigated, and a novel Pd reagent prepared from equimolar Pd(OAc)2, 1,3-Bis[diphenylphosphino]propane (DPPP), and Bu3P was developed. This method is useful for intramolecular biaryl coupling reactions, not only between aryl triflate and arene (triflate-amide), but also between aryl halide and arene (halo-amide).     

Chemistry of fullerene epoxides: synthesis, structure, and nucleophilic substitution-addition reactivity

Fullerene epoxides, C??O(n), having epoxide groups directly attached to the fullerene cage, constitute an interesting class of fullerene derivatives. In particular, the chemical transformations of fullerene epoxides are expected to play an important role in the development of functionalized fullerenes. This is because such transformations can readily afford a variety of mono- or polyfunctionalized fullerene derivatives while conserving the epoxy ring arrangement on the fullerene surface, as seen in representative regioisomeric fullerene polyepoxides. The first part of this review addresses the synthesis and structural characterization of fullerene epoxides. The formation of fullerene epoxides through different oxidation reactions is then explored. Adequate characterization of the isolated fullerene epoxides was achieved by concerted use of NMR and LC-MS techniques. The second part of this review addresses the substitution of fullerene epoxides in the presence of a Lewis acid catalyst. Most major substitution products have been isolated as pure compounds and their structures established through spectroscopic methods. The correlation between the structure of the substitution product and the oxygenation pattern of the starting materials allows elucidation of the mechanistic features of this transformation. This approach promises to lead to rigorous regioselective production of various fullerene derivatives for a wide range of applications.     

Hydration Structure Around the Carboxyl Group Studied by Neutron Diffraction with 12C/13C and H/D Isotopic Substitution Methods

Time-of-Flight (TOF) neutron diffraction measurements have been carried out on aqueous 8 mol% sodium acetate solutions in D₂O. Scattering cross sections that were observed for sample solutions involving ¹²C/¹³C and H/D isotopically substituted acetate ions were used to derive the first-order difference functions, Δ_H(Q) and Δ_C(Q), and corresponding distribution functions, G _H(r;r) and G _C(r;r), which describe the environmental structure around the methyl and the carboxyl groups within the acetate ion, respectively. Structural parameters concerning the first hydration shell of the carboxyl group within the acetate ion were obtained through the least squares fit to the observed intermolecular difference function, Δ_C ^inter(Q). The nearest neighbor C _O...D _W1 (C_O: carboxyl carbon atom, D_W1: water deuterium atom) distance, r(C _O...D _W1 ), and the angle, ∠ C _O ...D _W1 -O _W (O _W : water oxygen atom), were determined to be 2.63(1) Å and 120(1)°, respectively. The coordination number, n(C _O ...D _W1 ), was obtained to be 4.0(1). These results are consistent with the hydration structure in which water molecules in the first hydration shell of the carboxyl group are hydrogen-bonded with oxygen atoms of the carboxyl group.     

Synthesis of 2-pentafluorosulfanylnaphthalene

A three step synthesis of 2-pentafluorosulfanylnaphthalene is reported. Initial addition of SF₅Cl to benzobarralene was followed by elimination to form 2-pentafluorosulfanylbenzobarralene. Heating of this compound with 3,6-bis-(2-pyridyl)-1,2,4,5-tetrazine led to elimination of the ethylene bridge via a sequence of cycloadditions and retro-cycloadditions to form the title compound.     

Quantum dot-insect neuropeptide conjugates for fluorescence imaging, transfection, and nucleus targeting of living cells

We identified an insect neuropeptide, namely, allatostatin 1 from Drosophila melanogaster, that transfects living NIH 3T3 and A431 human epidermoid carcinoma cells and transports quantum dots (QDs) inside the cytoplasm and even the nucleus of the cells. QD-conjugated biomolecules are valuable resources for visualizing the structures and functions of biological systems both in vivo and in vitro. Here, we selected allatostatin 1, Ala-Pro-Ser-Gly-Ala-Gln-Arg-Leu-Tyr-Gly-Phe-Gly-Leu-NH2, conjugated to streptavidin-coated CdSe-ZnS QDs. This was followed by investigating the transfection of live mammalian cells with QD-allatostatin conjugates, the transport of QDs by allatostatin inside the nucleus, and the proliferation of cells in the presence of allatostatin. Also, on the basis of dose-dependent proliferation of cells in the presence of allatostatin we identified that allatostatin is not cytotoxic when applied at nanomolar levels. Considering the sequence similarity between the receptors of allatostatin in D. melanogaster and somatostatin/galanin in mammalian cells, we expected interactions and localization of allatostatin to somatostatin/galanin receptors on the membranes of 3T3 and A431 cells. However, with QD conjugation we identified that the peptide was delivered inside the cells and localized mainly to the cytoplasm, microtubules, and nucleus. These results indicate that allatostatin is a promising candidate for high-efficiency cell transfection and nucleus-specific cell labeling. Also, the transport property of allatostatin is promising with respect to label/drug/gene delivery and high contrast imaging of live cells and cell organelles. Another promising application of allatostatin is that the transport of QDs inside the nucleus would lift the limit of general photodynamic therapy to nucleus-specific photodynamic therapy, which is expected to be more efficient than photosensitization at the cell membrane or in the cytoplasm as a result of the short lifetime of singlet oxygen.     

Granulation of core particles suitable for film coating by agitation fluidized bed I. Optimum formulation for core particles and development of a novel friability test method

To prepare powdered medicines without bitter taste, film coating is required to cover the surface of core particles. In this study, effect of formulation and operating conditions of agitation fluidized bed on the core particle properties was investigated. In order to prevent breakage of the core particles during coating process, which sometimes causes variation of drug dissolution rate, addition of maltose syrup powder during the formulation process of the core particles was investigated. Also, a method for friability test in which the core particles were subjected to strong impact was proposed to evaluate strength of the core particles. The friability of the core particles determined by this test method correlated well with the actual friability of the particles during the coating process. Based on this result, we confirmed this novel friability test method could predict the core particle endurance during the coating process.