Stable barium compounds in YBa2Cu3Oy superconductors

The stability of various amounts of Ba₃Cu₃In₄O₁₂ (334) or BaTbO₃ (BTO) in a sintered YBa₂Cu₃O_y (YBCO) matrix was examined. Samples with added 334 or BTO exhibited critical temperatures (T_c) above 90 K for up to 20 vol.% addition and improved critical current densities (J_c) under a magnetic field. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) analysis indicated that 334 and BTO did not react with the YBCO matrix under the sintering conditions used. The normalized J_c under a magnetic field of 1 T reached a maximum at 14 vol.% of 334 addition and 20 vol.% BTO addition. YBCO thin films with added BTO showed a gradual decrease in the T_c with increasing BTO content. YBCO films with added 334 showed a constant T_c of 87 K up to a 334 content of 4 vol.%.     

From magnets to metals: the response of tetragonal bisdiselenazolyl radicals to pressure

The bromo-substituted bisdiselenazolyl radical 4b (R(1) = Et, R(2) = Br) is isostructural with the corresponding chloro-derivative 4a (R(1) = Et, R(2) = Cl), both belonging to the tetragonal space group P(4)2(1)m and consisting of slipped π-stack arrays of undimerized radicals. Variable temperature, ambient pressure conductivity measurements indicate a similar room temperature conductivity near 10(-4) S cm(-1) for the two compounds, but 4b displays a slightly higher thermal activation energy E(act) (0.23 eV) than 4a (0.19 eV). Like 4a, radical 4b behaves as a bulk ferromagnet with an ordering temperature of T(C) = 17.5 K. The coercive field H(c) (at 2 K) of 1600 Oe for 4b is, however, significantly greater than that observed for 4a (1370 Oe). High pressure (0-15 GPa) structural studies on both compounds have shown that compression reduces the degree of slippage of the π-stacks, which gives rise to changes in the magnetic and conductive properties of the radicals. Relatively mild loadings (<2 GPa) cause an increase in T(C) for both compounds, that of 4b reaching a maximum value of 24 K; further compression to 5 GPa leads to a decrease in T(C) and loss of magnetization. Variable temperature and pressure conductivity measurements indicate a decrease in E(act) with increasing pressure, with eventual conversion of both compounds from a Mott insulating state to one displaying weakly metallic behavior in the region of 7 GPa (for 4a) and 9 GPa (for 4b).     

Mechanistic studies on the formation of silver nanowires by a hydrothermal method

Silver (Ag) nanowires were fabricated from silver chloride (AgCl) by the hydrothermal method. The successful formation of Ag nanowires relied on the low solubility of AgCl as a precursor and the structural change of glucose to polymer on the Ag nanowire (protective layer). The Ag(+) ion concentration in the reaction solution containing AgCl was initially low, but after a reaction time of over 12 h, Ag(+) gradually reduced to Ag metal. Transmission electron microscope, Raman spectrometery, and X-ray photoelectron spectroscopy revealed that the surface of the obtained Ag nanowires possessed a carbon-rich layer with a carboxyl group, and the Ag(+) ion coordinated with the carboxyl group of this layer. The difference in the surface-free energy of Ag crystals changed the crystal growth rate that impelled the anisotropic growth of the Ag particles. By examining various reaction conditions, it was determined that the ratio of Cl(-) to Ag(+), reaction temperature, and reaction time are important factors for successful preparation of Ag nanowires. Under the reaction condition that the molar ratio of Cl(-) to Ag(+) at 160 °C for 24 h is above equimolar concentration, uniform Ag nanowires were successfully prepared.     

Monoterpene glucosides from Ziziphora clinopodioides (Labiatae)

Three new monoterpene glucosides, ziziphoroside A (1), B (2), and C (3), together with fifteen known compounds were isolated from the whole herb of Z. clinopodioides. The structures of new compounds were determined primarily from 1D-, 2D-NMR and circular dichroism (CD) spectroscopic analyses. The isolated compounds were evaluated for their inhibitory activity against nitric oxide (NO) production by lipopolysaccharide (LPS) and interferon (IFN)-γ activated macrophages, RAW 264.7. Shizonepetoside A (8) and flavones (11, 12, 13) showed potent inhibitory activity against NO production.     

Photochromogenic nanosheet crystallites of tungstate with a 2D bronze structure

Layered rubidium tungstate, Rb(4)W(11)O(35), with a two-dimensional (2D) bronze-type tunnel structure was successfully delaminated into colloidal nanosheets via a soft-chemical process involving acid exchange and subsequent intercalation of tetrabutylammonium ions. Characterizations by transmission electron microscopy and atomic force microscopy confirmed the formation of unilamellar 2D nanosheet crystallites with a unique thickness of ～3 nm and an average lateral size of 400 nm. The obtained nanosheets exhibited reversible color change upon UV-light excitation via an optical band gap of 3.5 eV. The ultimate 2D aspect ratio favorable for an adsorption of charge-compensating cations to trapped electrons working as a color center is presumably responsible for highly efficient photochromic behavior. Its coloration mainly consists of a broad band at a wavelength of 1800 nm and longer, which is much different from that of the common tungstate nanomaterials. Thus, the chromogenic nanosheet obtained in this study features the intense UV absorption and optically switchable visible-to-IR absorption, which may be useful for window applications such as cutoff filters and heat-absorbing films.     

Regioselectivity control of photodimerization of liquid-crystalline cinnamoyl compounds by phase variation: dual functionality of p-terphenyl substituent as a mesogen and a triplet sensitizer

Cinnamoyl-functionalized liquid-crystalline (LC) compounds having a 4″-substituted [1,1′;4′,1″]terphenyl (p-terphenyl) as mesogens were synthesized to investigate the abilities of the mesogen to act as a triplet sensitizer. UV (365 nm) irradiation of the LC compound having 4″-cyano-p-terphenyl in the crystalline and LC phases regioselectively produced the photodimers with a head-to-tail and a head-to-head cyclobutane unit, respectively. The p-terphenyl thus played the role of triplet sensitizer because the cinnamoyl group does not absorb 365 nm light. Due to the dual functionality of the p-terphenyl as the mesogen and the triplet sensitizer, we successfully performed the photochemical and regioselective cycloaddition to obtain two different LC dimers from one LC monomer.     

Photochemistry of fac‐[Re(bpy)(CO)3Cl]

The photochemistry of fac‐[Re(bpy)(CO)₃Cl] ( 1 a ; bpy=2,2′‐bipyridine) initiated by irradiation using <330 nm light has been investigated. Isomerization proceeded in THF to give the corresponding mer‐isomer 1 b . However, in the presence of a small amount of MeCN, the main product was the CO‐ligand‐substituted complex (OC‐6‐24)‐[Re(bpy)(CO)₂Cl(MeCN)] ( 2 c ; bpy=2,2′‐bipyridine). In MeCN, two isomers, 2 c and its (OC‐6‐34) form ( 2 a ), were produced. Only 2 c thermally isomerized to produce the (OC‐6‐44) form 2 b . A detailed investigation led to the conclusion that both 1 b and 2 c are produced by a dissociative mechanism, whereas 2 a forms by an associative mechanism. A comparison of the ultrafast transient UV‐visible absorption, emission, and IR spectra of 1 a acquired by excitation using higher‐energy light (e.g., 270 nm) and lower‐energy light (e.g., 400 nm) gave detailed information about the excited states, intermediates, and kinetics of the photochemical reactions and photophysical processes of 1 a . Irradiation of 1 a using the higher‐energy light resulted in the generation of the higher singlet excited state with τ≤25 fs, from which intersystem crossing proceeded to give the higher triplet state (³HES( 1 )). In THF, ³HES( 1 ) was competitively converted to both the triplet ligand field (³LF) and metal‐to‐ligand charge transfer (³M LCT) with lifetimes of 200 fs, in which the former is a reactive state that converts to [Re(bpy)(CO)₂Cl(thf)]⁺ ( 1 c ) within 10 ps by means of a dissociative mechanism. Re‐coordination of CO to 1 c gives both 1 a and 1 b . In MeCN, irradiation of 1 a by using high‐energy light gives the coordinatively unsaturated complex, which rapidly converted to 2 c . A seven‐coordinate complex is also produced within several hundred femtoseconds, which is converted to 2 a within several hundred picoseconds.     

Asymmetric Total Synthesis of (−)‐Stenine and 9a‐epi‐Stenine

A route for the asymmetric synthesis of (?)‐stenine, a member of the Stemona alkaloid family used as folk medicine in Asian countries, is described. The key features of the sequence employed include stereoselective transformations on a cyclohexane ring controlled by a chiral auxiliary unit and an intramolecular Mitsunobu reaction to construct the perhydroindole ring system. By using an intermediate in the route to (?)‐stenine, an asymmetric synthesis of 9a‐epi‐stenine was also executed. The C(9a) stereocenter in 9a‐epi‐stenine was installed by using a Staudinger/aza‐Wittig reaction of a keto–azide precursor followed by reduction of the resulting imine. The results of this effort demonstrate the applicability of the chiral auxiliary based strategy to the preparation of naturally occurring alkaloids that contain highly functionalized cyclohexane cores.     

Synthesis of disilanyl double-pillared bisdibenzofuran with a high triplet energy

A double-pillaring strategy for the synthesis of silacyclophanes has been applied to dibenzofuran to create a new cyclophane molecule that links two dibenzofuran molecules through σ(SiSi)-π conjugation. The performance of disilanyl double-pillared dibenzofuran [(Si)DPBD(O)] in green phosphorescent organic light-emitting diode (OLED) devices was evaluated as both a carrier-transport material and a host material for an Ir-based phosphorescent emitter.     

Temperature dependence of thermal diffusion for aqueous solutions of monosaccharides, oligosaccharides, and polysaccharides

We studied the thermal diffusion behavior for binary aqueous solutions of glucose, maltotriose, maltohexaose, pullulan, and dextran by means of thermal diffusion forced Rayleigh scattering (TDFRS). The investigated saccharides with molar masses between 0.180 and 440 kg mol(-1) were studied in the temperature range between 15 and 55 °C. The thermal diffusion coefficient D(T) and the Soret coefficient S(T) of all solutions increase with increasing temperature. For maltohexaose and the polymers the thermal diffusion coefficient changes sign from negative to positive with increasing temperature, whereas glucose and maltotriose show only positive values in the entire investigated temperature range. While we were able to find a master curve to describe the temperature dependence of D(T), we were not able to find a similar expression for S(T). This comprehensive study allows for the first time the determination of the interaction parameters for the polymer and the solvent within the theoretical framework suggested by Würger [Phys. Rev. Lett., 2009, 102, 078302].