Cationic ring-opening transfer polymerization of spiro ortho esters initiated by carbon black

The ring-opening transfer polymerization of spiro ortho esters (SOE) initiated by carbon black was investigated. In the absence of carbon black, no polymerization occurred at all. In the presence of channel black containing carboxyl group, the ring-opening transfer polymerization of SOE was initiated at 50-70°C. to give polyether ester, namely alternating copolymer of epoxide and lactone. The rate of polymerization of 1,4,6-trioxaspiro[4.4]nonane and 1,4,6-trioxaspiro[4.5]decane was considerably small compared with that of 1,4,6-trioxaspiro[4.6]undecane. The activation energy of the polymerization of 2-chloromethyl-1,4,6-trioxaspiro[4.6]undecane was estimated to be 6.0 kcal/mol. The initiating activity of carbon black increased with an increase in carboxyl group content of carbon black. Furnace black that contained no carboxyl group was unable to initiate the polymerization. Furthermore, the carbon black lost the initiating ability of the polymerization upon the blocking of carboxyl group on the surface by the treatment with potassium hydroxide or diazomethane. Based on these results, it was concluded that carboxyl group on carbon black plays an important role in the initiation. During the polymerization, a part of the polymer formed was grafted onto carbon black: the grafting ratio was 10–30%. The mechanisms of initiation and grafting were discussed.     

Effect of TRX-liposomes size on their prolonged circulation in rats

Newly formulated cationic liposomes (TRX-liposomes) with four different mean diameters were injected into twelve male rats via the lateral tail vein in order to evaluate the effect of liposomal size on pharmacokinetic parameters. TRX-liposomes disappeared from the blood according to the one-compartment model and demonstrated maximum and minimum half-lives of ca. 14 h (mean diameter of 114.3 nm) and ca. 5 h (mean diameter of 285.9 nm), respectively. This prolonged half-life tended to decrease at the boundary of 114.3 nm mean diameter. The optimal size (114.3 nm) for prolonged circulation of TRX-liposomes was consistent with that of pegylated liposomes such as Doxil((R)), however, the half-life was different among these liposomes. The electric charge of the TRX-liposomal surface is assumed to be responsible for this difference. The results of the present study will be very useful in the design of long-circulating cationic liposomes.     

Cross-chiral examinations of molecular enantioselective recognition by fast atom bombardment mass spectrometry: Host–guest complexations between chiral crown ethers and chiral organic ammonium ions

Using fast atom bombardment (FAB) mass spectrometry (MS), cross-chiral relationships were confirmed for the first time for the diasteromeric host-guest complexations between the chiral crown ether host (1) and the chiral organic ammonium ion guest (2) on the basis of the relative peak intensities (RPI). Both host–guest combinations (R, R, R, R) – 1, (R) – 2 and (S, S, S, S) – 1, (S) – 2 obviously provided larger RPI values than the combination of both (R, R, R, R) – 1, (S) – 2 and (S, S, S, S) – 1, (R) – 2 by a factor of 1.6 as an averaged value: 1.87 (n = 4)/1.16 (n = 4) = 1.6. These results are consistent with the expected stabilities of the host-guest complexations by CPK model examinations. Successfully observed cross-chiral examinations strongly suggest a potentially useful FABMS/RPI methodology for rapidly searching newly designed and synthesized crown ether-like host compounds with a higher degree of enantioselectivity.     

Unambiguously confirmed structure of 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one

To determine the structures of two isomeric products, 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (2) and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (3) obtained by condensation of 2,3-diaminopyridine (1) with ethyl benzoylpyruvate [1–3], these compounds were hydrolyzed to give 2-methyl-4H-pyrido[2,3-b]pyrazin-3-one (4) and 3-methyl-1H-pyrido[2,3-b]pyrazin-2-one (5) , respectively [4,5]. Both hydrolysates 4 and 5 were hydrogenated to afford 2-methyl-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (6) and 3-methyl-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (7) . The latter compound was identical with an unequivocally synthesized compound providing proof for the structures of all these compounds.     

Mechanistic Study on the Oxidation of Promazine and Chlorpromazine by Hexaimidazolcobalt(III) in Acidic Aqueous Media

The kinetics of the oxidation of promazine and chlorpromazine by hexaimidazolcobalt(III) were studied in the presence of a large excess of cobalt(III) and H⁺ ions using u.v.–vis. spectroscopy ([Co^III] = (1–6) × 10⁻³ m, [ptz] = (2.5–10) × 10⁻⁵ m, [H⁺] = 0.05–0.8 m, I = 1.0 m (H⁺, Na⁺, Cl⁻), T = 333–353 K, l = 1 cm). In each case, the reversible reaction leads to formation of cobalt(II) species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k_obs) on [Co^III] with a non-zero intercept was established for both phenothiazine derivatives. A marked difference in the observed reaction rate for promazine and chlorpromazine is associated with the difference in its ability to undergo oxidation and is consistent with a trend in the redox potential changes for these reductants. The activation parameters for reactions studied were determined. Mechanistic consequences of all the results are discussed.     

Development of fast disintegrating compressed tablets using amino acid as disintegration accelerator: evaluation of wetting and disintegration of tablet on the basis of surface free energy

A fast disintegrating compressed tablet was formulated using amino acids, such as L-lysine HCl, L-alanine, glycine and L-tyrosine as disintegration accelerator. The tablets having the hardness of about 4 kgf were prepared and the effect of amino acids on the wetting time and disintegration time in the oral cavity of tablets was examined on the basis of surface free energy of amino acids. The wetting time of the tablets increased in the order of L-lysine HCl, L-alanine, glycine and L-tyrosine, whereas the disintegration time in the oral cavity of the tablets increased in the order of L-alanine, glycine, L-lysine HCl and L-tyrosine. These behaviors were well analyzed by the introduction of surface free energy. When the polar component of amino acid was large value or the dispersion component was small value, faster wetting of tablet was observed. When the dispersion component of amino acid was large value or the dispersion component was small value, faster disintegration of tablet was observed, expect of L-tyrosine tablet. The fast disintegration of tablets was explained by the theory presented by Matsumaru.     

Efficient synthesis of thioesters and amides from aldehydes by using an intermolecular radical reaction in water

The combination of the water-soluble radical initiator, 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (VA-044) and the surfactant, cetyltrimethyl-ammonium bromide (CTAB), was found to be the most suitable condition for the effective and direct synthesis of useful active thioesters (pentafluorophenyl thioesters) in water. In addition, the direct amidation of aldehydes was achieved by the addition of the amines to the thioesterification reaction mixture in water.     

Preparation of AB polyacylthioureas and related copolyacylthioureas

Reaction of sulfinylaminobenzoyl chlorides with lead thiocyanate gave sulfinylaminobenzoyl isothiocyanates (SBIs), from which were derived aminobenzoyl isothiocyanate hydrochlorides (ABIHs). AB polyacylthioureas (PATUs) with inherent viscosities of up to 0.28 dL/g were obtained by treating the SBI with an equivalent of water in N-methyl-2-pyrrolidone (NMP). Low-temperature solution polyaddition of the ABIH afforded AB PATU with inherent viscosities of up to 0.66 dL/g, which were further increased to as high as 0.75 dL/g by adding lithium bases to the polymerization mixtures. Polyaddition of isophthaloyl diisothiocyanate with intermediate diamines formed by hydrolyzing the adducts of SBI and aromatic diamines afforded copolyacylthioureas with inherent viscosities of up to 1.15dL/g. The copolymers were generally soluble in NMP, whereas solubilities of the AB PATU in analogous solvents were relatively low. Thermogravimetric analyses in both air and nitrogen exhibited weight losses of 5% at 204–236°C for AB PATU and at 170–192°C for the copolymers.     

Polyisobutylene-containing block polymers by sequential monomer addition. X. Synthesis of poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene) thermoplastic elastomers

Preparatory to triblock synthesis experiments, the cationic polymerization of α-methylstyrene (αMeSt) was investigated using the 2-chloro-2,4,4-trimethylpentane (TMPCI)/TiCl₄ initiating system in the presence of triethylamine (Et₃N) as electron donor (ED) and CH₃Cl/n-hexane mixed solvent in the ?80 to ?40°C range. Conversions are influenced by temperature, [TiCl₄], [Et₃N], and [αMeSt]. The polymerization of αMeSt is living at ?80°C: Both termination and chain transfer to monomer are frozen out, however, initiation is slow relative to propagation. Highly syndiotactic (>94%) Pα Mest was obtained. At?60deg;C initiator efficiency is ca. 100%, but termination becomes evident. Et₃N may act both as Ed and as proton scavenger. Novel poly(α-methystyrene-b-isobutylene-b-α-methylstyrene) (PαMeSt-PIB-PαMeSt) triblocks have been synthesized by adding αMeSt to biliving polyisobutylene carbocations (⊕PIB⊕) in the ?80 to ?40°C range. The effects of temperature, solvent polarity, and [Et₃N] on the block copolymerization have been investigated. At ?80°C, the rate of crossover from ⊕PIB⊕ to αMeSt is lower than that of propagation of PαMeSt⊕, so that the triblock is contaminated by PIB and PIB-b-PαMeSt. At ?60°C, crossover occurs preferentially. The rate of propagation relative to that of crossover is also reduced by lowering the solvent polarity and increasing the [Et₃N]. High crossover efficiency and blocking efficiency can be obtained under optimum blocking conditions. The triblocks are novel thermoplastic elastomers (TPEs). © 1994 John Wiley & Sons, Inc.     

Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).