Cross-chiral examinations of molecular enantioselective recognition by fast atom bombardment mass spectrometry: Host–guest complexations between chiral crown ethers and chiral organic ammonium ions

Using fast atom bombardment (FAB) mass spectrometry (MS), cross-chiral relationships were confirmed for the first time for the diasteromeric host-guest complexations between the chiral crown ether host (1) and the chiral organic ammonium ion guest (2) on the basis of the relative peak intensities (RPI). Both host–guest combinations (R, R, R, R) – 1, (R) – 2 and (S, S, S, S) – 1, (S) – 2 obviously provided larger RPI values than the combination of both (R, R, R, R) – 1, (S) – 2 and (S, S, S, S) – 1, (R) – 2 by a factor of 1.6 as an averaged value: 1.87 (n = 4)/1.16 (n = 4) = 1.6. These results are consistent with the expected stabilities of the host-guest complexations by CPK model examinations. Successfully observed cross-chiral examinations strongly suggest a potentially useful FABMS/RPI methodology for rapidly searching newly designed and synthesized crown ether-like host compounds with a higher degree of enantioselectivity.     

Co-hydrolysis products of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions: Part 2 [1]

²⁹Si NMR peaks due to species with the double four-membered ring siloxane backbone composed of both Si(O^–)_4/2 and CH₃Si(O^–)_3/2 units, (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=1–3), formed by co-hydrolysis of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions in methanol have been assigned. It has been found that ²⁹Si NMR peaks due to Si(OSi)₃(O^–) units shift to lower frequencies by replacement of the adjacent Si(O^–)_4/2 units by CH₃Si(O^–)_3/2 units, in other words, with increasing m value in Si[OSi(O^–)₃]_{3 – m} [OSi(CH₃) (O^–)₂] _m (O^–) (m=0–2). Peaks from CH₃ Si(OSi)₃ units in the species have also appeared as separated due to the kind of neighbor structural units. On the basis of the assignments, positions of CH₃Si(O^–)_3/2 units in the cubic octameric siloxane framework of (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=2, 3), for both of which three isomers are present, have been estimated.     

Unambiguously confirmed structure of 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one

To determine the structures of two isomeric products, 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (2) and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (3) obtained by condensation of 2,3-diaminopyridine (1) with ethyl benzoylpyruvate [1–3], these compounds were hydrolyzed to give 2-methyl-4H-pyrido[2,3-b]pyrazin-3-one (4) and 3-methyl-1H-pyrido[2,3-b]pyrazin-2-one (5) , respectively [4,5]. Both hydrolysates 4 and 5 were hydrogenated to afford 2-methyl-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (6) and 3-methyl-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (7) . The latter compound was identical with an unequivocally synthesized compound providing proof for the structures of all these compounds.     

Effect of lipid composition on phospholipase A2-catalyzed membrane leakage in immobilized liposomes: sensitization for polychlorinated biphenyls detection with antibody affinity column tandem with fluorescent liposome column

Phospholipase A(2) (PLA(2))-catalyzed membrane leakage can be detected by immobilized liposomes containing a self-quenching fluorescent dye, calcein, on an open column using off-line analysis with a fluorescent spectrophotometer. The calcein release was found to be affected by the pH value, incubation time, and liposome compositions. The fluorescent signal from the negatively charged liposomes hydrolyzed by PLA(2) was 5 times higher than that from neutral liposomes. We utilized this enzymatic reaction to amplify signal to detect polychlorinated biphenyls (PCBs). To achieve this goal, we conjugated an analogue of PCB, 3,4-dichloroaniline, to PLA(2). The competitive immunoreaction between the 3,4-dichloroaniline-PLA(2) conjugate and PCB samples on the anti-PCB antibody column caused the release of the bound PLA(2) conjugates in proportion to the PCB concentration. The released PLA(2) conjugates was then passed through the tandem fluorescent liposome column causing release of fluorescent dye from the liposomes. Therefore, the signal of immunocompetitive assay was amplified on the fluorescent liposome column. The tandem column system achieves a high sensitivity by detecting the PCB concentration as low as 0.5 ng/mL in less than 20 min. It has great potential in detecting other pollutants, and has been used for sensitive immunoassays.     

Photocatalytic Reduction of NO with C2H6 on a Hollandite-Type Catalyst

The photocatalytic reduction of nitrogen monoxide (NO) with ethane on the hollandite type catalyst (K₂Ga₂Sn₆O₁₆KGSO) was investigated. Using a closed-gas circulating system equipped with a Q-MASS detector and in-situ diffuse reflectance FT-IR spectroscopy. The reactant gases of NO and ¹³C₂H₆ decreased with the increasing irradiation time. In contrast, the N₂ yield increased proportionally to the conversion of ¹³C₂H₆. Nitrogen oxides such as N₂O did not reach their detectable levels. The NO adsorbed on KGSO was found to change to its activated species by UV irradiation. The oxidized products of C₂H₆ such as CH₃CHO increased in proportion to the reaction time. The present results strongly suggest that KGSO has remarkable photocatalytic activity for the reduction of NO with C₂H₆.     

Development of fast disintegrating compressed tablets using amino acid as disintegration accelerator: evaluation of wetting and disintegration of tablet on the basis of surface free energy

A fast disintegrating compressed tablet was formulated using amino acids, such as L-lysine HCl, L-alanine, glycine and L-tyrosine as disintegration accelerator. The tablets having the hardness of about 4 kgf were prepared and the effect of amino acids on the wetting time and disintegration time in the oral cavity of tablets was examined on the basis of surface free energy of amino acids. The wetting time of the tablets increased in the order of L-lysine HCl, L-alanine, glycine and L-tyrosine, whereas the disintegration time in the oral cavity of the tablets increased in the order of L-alanine, glycine, L-lysine HCl and L-tyrosine. These behaviors were well analyzed by the introduction of surface free energy. When the polar component of amino acid was large value or the dispersion component was small value, faster wetting of tablet was observed. When the dispersion component of amino acid was large value or the dispersion component was small value, faster disintegration of tablet was observed, expect of L-tyrosine tablet. The fast disintegration of tablets was explained by the theory presented by Matsumaru.     

Preparation of AB polyacylthioureas and related copolyacylthioureas

Reaction of sulfinylaminobenzoyl chlorides with lead thiocyanate gave sulfinylaminobenzoyl isothiocyanates (SBIs), from which were derived aminobenzoyl isothiocyanate hydrochlorides (ABIHs). AB polyacylthioureas (PATUs) with inherent viscosities of up to 0.28 dL/g were obtained by treating the SBI with an equivalent of water in N-methyl-2-pyrrolidone (NMP). Low-temperature solution polyaddition of the ABIH afforded AB PATU with inherent viscosities of up to 0.66 dL/g, which were further increased to as high as 0.75 dL/g by adding lithium bases to the polymerization mixtures. Polyaddition of isophthaloyl diisothiocyanate with intermediate diamines formed by hydrolyzing the adducts of SBI and aromatic diamines afforded copolyacylthioureas with inherent viscosities of up to 1.15dL/g. The copolymers were generally soluble in NMP, whereas solubilities of the AB PATU in analogous solvents were relatively low. Thermogravimetric analyses in both air and nitrogen exhibited weight losses of 5% at 204–236°C for AB PATU and at 170–192°C for the copolymers.     

Polyisobutylene-containing block polymers by sequential monomer addition. X. Synthesis of poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene) thermoplastic elastomers

Preparatory to triblock synthesis experiments, the cationic polymerization of α-methylstyrene (αMeSt) was investigated using the 2-chloro-2,4,4-trimethylpentane (TMPCI)/TiCl₄ initiating system in the presence of triethylamine (Et₃N) as electron donor (ED) and CH₃Cl/n-hexane mixed solvent in the ?80 to ?40°C range. Conversions are influenced by temperature, [TiCl₄], [Et₃N], and [αMeSt]. The polymerization of αMeSt is living at ?80°C: Both termination and chain transfer to monomer are frozen out, however, initiation is slow relative to propagation. Highly syndiotactic (>94%) Pα Mest was obtained. At?60deg;C initiator efficiency is ca. 100%, but termination becomes evident. Et₃N may act both as Ed and as proton scavenger. Novel poly(α-methystyrene-b-isobutylene-b-α-methylstyrene) (PαMeSt-PIB-PαMeSt) triblocks have been synthesized by adding αMeSt to biliving polyisobutylene carbocations (⊕PIB⊕) in the ?80 to ?40°C range. The effects of temperature, solvent polarity, and [Et₃N] on the block copolymerization have been investigated. At ?80°C, the rate of crossover from ⊕PIB⊕ to αMeSt is lower than that of propagation of PαMeSt⊕, so that the triblock is contaminated by PIB and PIB-b-PαMeSt. At ?60°C, crossover occurs preferentially. The rate of propagation relative to that of crossover is also reduced by lowering the solvent polarity and increasing the [Et₃N]. High crossover efficiency and blocking efficiency can be obtained under optimum blocking conditions. The triblocks are novel thermoplastic elastomers (TPEs). © 1994 John Wiley & Sons, Inc.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).