Polarization Sensitive Spectral Interferometric Optical Coherence Tomography for Biological Samples

A spectral interferometric optical coherence tomography (OCT) system which has polarization sensitivity is developed. This system reduces the mechanical scanning dimension by employing the principle of spectral interferometry, and measures a two dimensional cross-sectional image of biological tissue with one dimensional mechanical scanning. Sixteen OCT images with different polarization conditions are measured, and two dimensional distributions of each element of the Müller matrix of a sample to be measured are calculated.     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Observation of turbulent-driven shear flow in a cylindrical laboratory plasma device

An azimuthally symmetric radially sheared plasma fluid flow is observed to spontaneously form in a cylindrical magnetized helicon plasma device with no external sources of momentum input. A turbulent momentum conservation analysis shows that this shear flow is sustained by the Reynolds stress generated by collisional drift turbulence in the device. The results provide direct experimental support for the basic theoretical picture of drift-wave-shear-flow interactions.     

Observation of methoxy species on the Si(111)(7 × 7) surface — A vibrational study

Chemisorption of methanol on the Si(111)(7 × 7) surface has been studied at ～ 300 K using high-resolution electron energy loss spectroscopy. Methanol reacts with the Si(111) surface to form the stable surface species SiOCH₃ and SiH. The methoxy species (CH₃O) is bonded to the Si surface with a covalent bond formed between its oxygen end and the dangling bond of the Si(111) surface atom. A structural model for methanol chemisorbed on the Si(111) surface is proposed.     

Sorption and pervaporation properties of crosslinked membranes of poly(ethylene oxide imide) segmented copolymer to aromatic/nonaromatic hydrocarbon mixtures

Poly(ethylene oxide imide) segmented copolymer (PEO‐PI) membranes were crosslinked by the chemical reaction between ethylene glycol diglycidyl ether and benzylalcohol groups of diamine moieties in polyimide segments at high temperatures. Sorption and diffusion of penetrants took place in poly(ethylene oxide) segment microdomains. Sorption and desorption behavior of pure vapors such as benzene (Bz), cyclohexane (Cx) and n‐hexane (Hx) was classified as the Fickian diffusion. Sorption isotherms of binary liquid mixtures could be represented by the Flory–Rehner model, but the model overpredicted the sorption amounts of Cx and Hx, leading to small predictions of sorption selectivity α_S for Bz/Cx and Bz/Hx systems. UNIFAC‐FV model fairly well predicted the sorption amounts of aromatic hydrocarbons, but significantly overestimated those of nonaromatic ones, leading to too small predictions of α_S. Pervaporation (PV) behavior of PEO‐PI membranes was governed by sorption behavior followed by membrane swelling. Diffusion coefficient weakly depended on the minimum cross section of a penetrant. The diffusivity selectivity α_D hardly depended on the feed composition and was about 1.4 and 0.75 for Bz/Cx and Bz/Hx, respectively. PV selectivity α_PV was larger for Bz/Hx than for Bz/Cx because of larger α_S. PEO‐PI membranes displayed high specific permeation flux Ql and reasonably high α_PV for aromatic/nonaromatic hydrocarbons; for example, Ql = 60 Kg μm/(m² h) and α_PV = 8 for a feed mixture containing Bz, Tol, Hx, n‐Ot and i‐Ot of 20 wt % at 353 K. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1800–1811, 2000     

Acid-catalyzed photoreaction of 6-chloro-1,3-dimethyluracil and mesitylene: formation of photocycloadducts and their characterization

In contrast to the previously reported short time required (1 h) for photolysis of 6-chloro-1,3-dimethyluracil (6-CIDMU) and mesitylene, in the presence of TFA, resulting in two major products: 1,3,6,8,10-pentamethylcyclooctapyrimidine derivative (1d), and diazapentacyclo[6.4.0.0(1,3).0(2,5).0(4,8)]dodecane (2c), prolonged irradiation (18h) of this same mixture yields novel pentalenopyrimidine derivatives, including diazapentacyclo[6.4.0.0(1,3).0(2,6).0(4,8)]dodecane (3c).     

Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Five new sesquiterpenoids and a new diterpenoid from Erigeron annuus (L.) PERS., Erigeron philadelphicus L. and Erigeron sumatrensis RETZ

The aerial parts of Erigeron annuus (L.) PERS., E. philadelphicus L. and E. sumatrensis RETZ. (Compositae) have been investigated chemically. A new sesquiterpenoid, 6beta,14-epoxyeudesm-4(15)-en-1beta-ol (1), and a new diterpenoid, philadelphinone (6), have been isolated from E. philadelphicus. Four new sesquiterpenoids, (7R*)-opposit-4(15)-ene-1beta,7-diol (2), 11-methoxyopposit-4(15)-en-1beta-ol (3), 15-methoxyisodauc-3-ene-1beta,5alpha-diol (4) and 10alpha-hydroxycadin-4-en-15-al (5), have been isolated from E. annuus. Compounds 2 and 4 were also isolated from E. sumatrensis. The structures of the new compounds were elucidated on the basis of their spectral data.     

A new norsesquiterpenoid from Russula delica Fr

Russulanorol (1), a new norsesquiterpenoid with a novel carbon skeleton, was isolated from the fruiting bodies of Russula delica FR. (Russulaceae) together with three known sesquiterpenoids. The structure of 1 was elucidated on the basis of spectral data and chemical transformation. Compound 1 is an equilibrium mixture of two stereoisomers (1a, b) on the C-11 acetal carbon.