Edge-defined film-fed growth of Yb:YVO4 single crystal plates

The applicability of the edge-defined film-fed growth (EFG) technique for Yb_xY_(1−x)VO₄ (x=0.05, 0.1 and 1) was approved by successful growth of crystals up to 80 mm in length as the thin plates. Low-angle grain boundaries and the crystal coloration as main defects were found. Optimal seed orientation was suggested on the strength of vanadate crystal plate morphology. Optical properties, chemical composition and the crystalline quality were investigated.     

Photocarrier diffusion lengths of high-growth-rate microcrystalline silicon

We report on photocarrier transport of high-growth-rate microcrystalline Si (μc-Si) in conjunction with the lateral size, σ_L, of crystallites’ conglomerate (grain) determined from the atomic force microscope (AFM) topographic images on the basis of fractal concepts. μc-Si films were prepared using very-high-frequency plasma-enhanced chemical vapor deposition at a high deposition rate of 6.8 ± 0.5 nm/s. μc-Si thicknesses, d, were varied from 0.53 μm to 5.6 μm. With an increase in d, σ_L increased from 70 nm to 590 nm. At the same time, the ambipolar diffusion lengths, L_amb, of photocarriers, observed using the steady-state photocarrier grating (SSPG) technique, increased from 50 nm to 420 nm. Log–log plots of L_amb versus d and σ_L versus d were both expressed as a power law with an exponent of 0.9, yielding a simple linear relation between L_amb and σ_L. Moreover, their ratio, L_amb/σ_L, was below unity, implying the intra-grain carrier diffusion. From these results, the role of the grain (column) boundaries for photocarrier diffusion in μc-Si is discussed.     

Total Synthesis of Zephycarinatines via Photocatalytic Reductive Radical ipso-Cyclization

We report herein a nonbiomimetic strategy for the total synthesis of the plicamine-type alkaloids zephycarinatines C and D. The key feature of the synthesis is a stereoselective reductive radical ipso-cyclization using visible-light-mediated photoredox catalysis. This cyclization enabled the construction of a 6,6-spirocyclic core structure through the addition of a carbon-centered radical onto the aromatic ring. Biological evaluation of zephycarinatines and their derivatives revealed that the synthetic derivative with a keto group displays moderate inhibitory activity against LPS-induced NO production. This approach could offer future opportunities to expand the chemical diversity of plicamine-type alkaloids as well as providing useful intermediates for their syntheses.     

Recyclable carbon fiber‐reinforced plastics (CFRP) containing degradable acetal linkages: Synthesis,properties, and chemical recycling

Two epoxy resins containing degradable acetal linkages were synthesized by the reaction of cresol novolak‐type phenolic resin (CN) with vinyl ethers containing a glycidyl group [cyclohexane dimethanol vinyl glycidyl ether (CHDMVG) and 4‐vinyloxybutyl glycidyl ether (VBGE). Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating laminated prepreg sheets with CN‐CHDMVG resin (derived from CN and CHDMVG) and CN‐VBGE resin (derived from CN and VBGE), in which carbon fibers are impregnated with epoxy resins containing curing agents [dicyandiamide (DICY)] and curing accelerator [3‐(3,4‐dichlorophenyl)‐1,1‐dimethylurea (DCMU)]. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs exhibited almost the same tensile strength as the conventional bisphenol‐A‐based CFRPs. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs underwent smooth breakdown with the treatment of hydrochloric acid in tetrahydrofuran at room temperature for 24 h to regenerate strands of carbon fibers. The surface conditions of the recovered carbon fibers had little changes during degradation and recovery processes on the basis of scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The recovered carbon fibers exhibited almost the same tensile strength as virgin carbon fibers and hence would be reused for the production of CFRPs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1052–1059     

Optical anisotropy and columnar structure of obliquely deposited thin films containing fine metal particles ag]

Anisotropic optical properties and nanostructures of thin films prepared by oblique co-deposition of Ag and SiO₂ were studied. At low concentrations of Ag, a columnar structure grew towards the direction of the incident SiO₂ vapor and small Ag particles were embedded in that structure. An inhomogeneous distribution of Ag was observed in cases where the Ag was deposited from the opposite side of the surface normal to the direction of the incident SiO₂ vapor. This inhomogeneous distribution of Ag particles gives rise to optical anisotropy, i.e., the optical transmittance of p-polarized light varies drastically depending on the angle of incidence, while that of s-polarized light remains unchanged. A possible application of the anisotropic optical absorption properties of Ag---SiO₂ hybrid films is in the manufactur of an inorganic thin film polarizer.     

Selective growth and other applications of hydrogen-assisted molecular beam epitaxy

The usefulness of atomic hydrogen in molecular beam epitaxy has been demonstrated, centering around selective growth. Atomic hydrogen is effective for low-temperature cleaning of substrates, surfactant effects such as restrain of island growth and suppression of the surface migration of the adatoms and selective growth on masked or V-grooved substrates. These effects are dependent on substrate temperatures. The selective growth of GaAs has been successfully demonstrated at the conventional growth temperature and growth rate with the aid of atomic hydrogen. The main mechanism of the selective growth is the re-evaporation of Ga and As from mask materials such as SiN_x or SiO₂. Selective growth has also been observed on low-index crystal facets. On (111)A and (110) facets, no GaAs was deposited in the presence of atomic hydrogen, the flux of which is approximately the same as that of Ga. GaAs quantum wire structures have been fabricated on the substrates with V-shaped grooves. The efficient capture and confinement of carriers into wire regions have been observed by photolumenescence.     

A non‐volatile,bistable, and rewritable memory device fabricated with poly(nitroxide radical) and silver salt layers

A non‐volatile, bistable, and rewritable organic memory device was successfully fabricated with the layers of poly(2,2,6,6‐tetramethylpiperidine‐1‐oxyl methacrylate) (PTMA) and poly(methyl methacrylate) (PMMA) containing silver salt. The PTMA layer was employed as a p‐dopable material, while the silver salt‐dispersed PMMA layer acted as an n‐dopable material. The ON–OFF ratio between low‐conductivity and high‐conductivity states amounted to more than four orders of magnitude, and the retention time was longer than 10³ sec. The device was characterized by excellent rewritability. Copyright © 2007 John Wiley & Sons, Ltd.     

Annulation of Alkynyl Aryl Ethers with Allyl Pivalates To Give 2,3‐Bismethylenechromanes through Double C−H Bond Cleavage

The treatment of silylethynyloxyarenes with allylic pivalates in the presence of a palladium catalyst led to efficient C?H bond cleavage in both substrates and a novel annulation reaction to give 2,3‐bismethylenechromanes. When ortho‐allylated silylethynyloxybenzenes were used as the substrates, the same products were obtained. This result shows that site‐selective intramolecular hydrovinylation is involved in the annulation reaction. The synthetic utility of the products was demonstrated by the construction of condensed polycycles.     

Highly beta-selective O-glucosidation due to the restricted twist-boat conformation

[reaction: see text] Ethyl 1-thio-2,3,4,6-tetrakis-O-triisopropylsilyl-beta-d-glucopyranoside, ethyl 6-O-benzyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside, and ethyl 6-O-pivaloyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside induced highly beta-selective O-glucosidations. Among them, the 6-O-pivaloylated substrate provided the best selectivity up to alpha/beta = 3:97 with cyclohexylmethanol, and the substrate was used for glucosidations with secondary and tertiary alcohols in a highly beta-selective manner. The selectivity would be caused by the twist-boat conformation of the pyranose; this is the first beta-selective O-glucosidation based on conformational control of the pyranose ring.