Formation of Water-Soluble Dye-Doped Silica Particles

Formation mechanism of dye-doped silica particles less than 1 µm in diameters by the Stöber method was investigated. With increasing the content of dyes such as water-soluble porphyrin (TTMAPP) and laser dye (Nile blue), these dye-doped silica particles showed the similar tendency to the following characters: (1) Particle size increased, passed through the maximum at the dye content corresponds to the isoelectric point, and then followed by decrease; (2) Ratio of dimer and monomer of the incorporated dye decreased. In aqueous solution positively charged dyes showed good affinity with negatively charged SiO₂ primary particles from the early stage of the formation. Zeta potential of doped-silica particles was measured against nominal dye content: from non-doped to highly doped particles, their surface charge changed from negative to positive. The similar influence caused by positively charged dyes on the particle formation was also observed by Ca²⁺ doping.     

Theoretical study of O2-H2O: potential energy surface, molecular vibrations, and equilibrium constant at atmospheric temperatures

The intermolecular potential energy surface of O(2)-H(2)O was investigated at ab initio MP2 and MRSDCI levels using the aug-cc-pVTZ basis set. The vibrational levels were evaluated by numerically solving the Schr?dinger equations for the nuclear motions with the ab initio potential functions using one- to three-dimensional finite-element methods. On the basis of the calculated partition functions, the equilibrium constant of the complex, K(p), was studied. The K(p) values at atmospheric temperatures of 200-300 K were found to be 1-2 orders of magnitude less than previous estimates from the harmonic oscillator approximation.     

2-(8-quinolylazo)-4,5-diphenylimidazole — a sensitive extraction spectrophotometric reagent for mercury

Mercury(II) reacts with 2-(8-quinolylazo)-4,5-diphenylimidazole in aqueous solution; the complex can be extracted with chloroform or 1,2-dichloroethane at pH 4.5–9.5 to give a stable reddish-purple solution. The system conforms to Beer's law; the optimal range in chloroform is 0.05–2 ppm mercury (1-cm cells). Of 25 metal ions investigated, only copper and vanadium interfere seriously. The proposed method is exceptionally sensitive; the molar absorptivity in the chloroform extract is 7.3 × 10⁴ l mol^?1 cm^?1 at 580 nm; the Sandell sensitivity is 0.0027μg Hg cm^?2.     

Novel bridged bis-azulenyl and bis-tetrahydroazulenyl hafnocenes: Synthesis, structure, and propylene polymerization behavior

Novel bridged bis-azulenyl hafnocenes: dichlorodimethylsilylenebis(2-methyl-4-phenyl-4H-azulenyl) hafnium (4a) and dichlorodimethylsilylenebis[2-ethyl-4-(4-chlorophenyl)-4H-azulenyl] hafnium (4b) were synthesized from 2-methylazulene and 2-ethylazulene, respectively. Hydrogenation of 4a and 4b gave novel bis-tetrahydroazulenyl hafnocenes: dichlorodimethylsilylenebis(2-methyl-4-phenyl-4H-5,6,7,8-tetrahydroazulenyl) hafnium (5a) and dichlorodimethylsilylenebis[2-ethyl-4-(4-chlorophenyl)-4H-5,6,7,8-tetrahydroazulenyl] hafnium (5b). The structures of 4a and 5b were determined by X-ray crystallographic analysis to fold C₂ symmetry. These hafnocenes were found to be active catalysts for propylene polymerization in the presence of methylaluminoxane (MAO), and the preliminary polymerization behavior of these catalysts was evaluated. The melting point and molecular weight of resultant polypropylene were higher than those of the bis-azulenyl zirconocenes. In particular, a high melting point (160 °C for 5a and 161 °C for 5b) was observed with the bis-tetrahydroazulenyl system, although the activities by these hafnocenes were lower than those by the corresponding zirconocenes.     

Determination of the surface free energy of modified carbon fibers and its relation to the work of adhesion

Surface free energy of various carbon fibers was determined by tensiometric method in three different procedures. The dispersive _s ^d and the nondispersive _s ^p components were separately determined by contact angle measurements in two-phase system, formamide-n-alkanes. The _s ^p increased by oxidation and decreased by hydrogen reduction, while the _s ^d remained almost constant.The _s ^p value determined from contact angle of water/ethyleneglycol solution tended to become higher. The critical surface free energy was in harmony with the total free energy determined from formamide-n-alkanes system as long as liquids were properly selected. The formation of oxygen-containing functional groups was evidenced by ESCA, and the surface [O]/[C] ratio was related linearly to the surface polarity defined by _s ^p [ _s ^d + _s ^p ] Oxidation in liquid phase resulted in the formation of both hydroxyls and carboxyls, while only hydroxyls were formed in gas phase. The interfacial shear strength of the fiber-epoxy resin could be closely correlated with thermodynamical work of adhesion calculated on the basis of surface free energy and its component.     

Spectrophotometric determination of cadmium with 1-[(5-chloro-2-pyridyl)azo]-2-naphthol

Summary Cadmium(II) reacts with l-[(5-chloro-2-pyridyl)azo]-2-naphthol (5-C1--PAN) in aqueous solution; the complex can be extracted with chloroform at pH 9–11 to give a red solution with an absorption peak at 566 nm. The colour in chloroform is stable and the system conforms to Beer's law; optimal range in the chloroform layer for measurement at 1.00-cm cells is 0.1–1 ppm cadmium. Common cations and anions do not interfere. Large amounts of some cations can be masked by potassium cyanide, the cadmium cyanide complex being demasked by formaldehyde. The proposed method is one of the most sensitive procedure for the determination of cadmium. The molar absorptivity in the chloroform extract is 6.6· 10⁴ 1 mole^–1 cm^–2 at 566 nm.

---

Zusammenfassung Cadmium reagiert mit 1-(5-Chlor-2-pyridyl) azo-2-naphthol, 5-C1--PAN, in wäßriger Lösung; der rote Komplex kann bei pH 9–11 mit Chloroform extrahiert werden und hat ein Absorptionsmaximum bei 566 nm. Die chloroformische Lösung ist stabil und entspricht dem Beerschen Gesetz; für die Messung in l-cm-Küvetten eignen sich am besten 0,1–1 ppm Cd. Übliche Ionen stören nicht. Große Mengen einiger Kationen können mit KCN maskiert werden, wahrend [Cd(CN)₄]^2– von Formaldehyd gespalten wird. Die vorgeschlagene Methode ist eine der empfindlichsten für die Bestimmung von Cd. Die molare Extinktion des chloroformischen Extraktes betragt bei 566 nm 6,6 · 10⁴ 1 · mol^–1 · cm^–2.

     

Miscibility behavior of dipalmitoylphosphatidylcholine with a single-chain partially fluorinated amphiphile in Langmuir monolayers

Surface pressure-area, surface potential-area, and dipole moment-area isotherms were obtained for monolayers made from a partially fluorinated surfactant, (perfluorooctyl)undecyldimorpholinophosphate (F8H11DMP), dipalmitoylphosphatidylcholine (DPPC), and their combinations. Monolayers, spread on a 0.15 M NaCl subphase, were investigated at the air/water interface by the Wilhelmy method, ionizing electrode method, and fluorescence microscopy. Surface potentials were analyzed using the three-layer model proposed by Demchak and Fort. The contribution of the dimorpholinophosphate polar head group of F8H11DMP to the vertical component of the dipole moment was estimated to be 4.99 D. The linear variation of the phase transition pressure as a function of F8H11DMP molar fraction (X(F8H11DMP)) demonstrated that DPPC and F8H11DMP are miscible in the monolayer. This result was confirmed by deviations from the additivity rule observed when plotting the molecular areas and the surface potentials as a function of X(F8H11DMP) over the whole range of surface pressures investigated. Assuming a regular surface mixture, the Joos equation, which was used for the analysis of the collapse pressure of mixed monolayers, allowed calculation of the interaction parameter (xi=-1.3) and the energy of interaction (Delta epsilon =537 Jmol(-1)) between DPPC and F8H11DMP. The miscibility of DPPC and F8H11DMP within the monolayer was also supported by fluorescence microscopy. Examination of the observed flower-like patterns showed that F8H11DMP favors dissolution of the ordered LC phase domains of DPPC, a feature that may be key to the use of phospholipid preparations as lung surfactants.     

Properties of two-component Langmuir monolayer of single chain perfluorinated carboxylic acids with dipalmitoylphosphatidylcholine (DPPC)

The surface pressure (π)– and the surface potential (ΔV)–area (A) isotherms were obtained for two-component monolayers of four different perfluorocarboxylic acids (FCns; perfluorododecanoic acid: FC12, perfluorotetradecanoic acid: FC14, perfluorohexadecanoic acid: FC16, perfluorooctadecanoic acid: FC18) with dipalmitoylphosphatidylcholine (DPPC) on substrate solution of 0.15 M NaCl (pH 2.0) at 298.2 K as a function of compositions in the mixtures by employing the Wilhelmy method, the ionizing electrode method, the fluorescence microscopy, and the atomic force microscopy. The data for the two-component monolayers on these systems were analyzed in terms of the additivity rule. Assuming a regular surface mixture, the Joos equation which allows one to describe the collapse pressure of a two-component monolayer with miscible components was used to declare the miscibility of the monolayer state, and an interaction parameter and an interaction energy were calculated. The new finding was that FCns and DPPC are miscible or immiscible depending on chain length increment of fluorocarbon part. That is, FC12/DPPC monolayer was perfectly miscible, and FC14/DPPC, and FC16/DPPC (0 ≤ X_FC16 ≤ 0.3) monolayers were partially miscible. While FC16/DPPC (0.3 < X_FC16 < 1) and FC18/DPPC systems are immiscible in the monolayer state. Furthermore, the mean molecular area, the surface dipole moment, and the phase diagrams enabled us to estimate the molecular orientation of four different perfluorocarboxylic acids/DPPC in the two-component monolayer state. One type of phase diagrams was obtained and classified into the positive azeotropic type. The miscibility of FCns and DPPC in the monolayer was also supported by fluorescence microscopy and atomic force microscopy. FC12/DPPC, FC14/DPPC and FC16/DPPC (0 ≤ X_FC16 ≤ 0.3) two-component monolayers on 0.15 M NaCl (pH 2) showed that FC12, FC14 and FC16 (0 ≤ X_FC16 ≤ 0.3) can dissolve or partially dissolve the ordered solid DPPC domains formed upon compression. This indicates that these fluorinated amphiphiles soften or harden the lipid depending on their chain length.     

Furopyridines. XIX. Reaction of furo[2,3-b]-, -[3,2-b]-, -[2,3-c]- and -[3,2-c]pyridine with acetic anhydride

Acetoxylation of N-oxide of furo[2,3-b]- 2a , -[3,2-b]- 2b , -[2,3-c]- 2c and -[3,2-c]pyridine 2d with acetic anhydride afforded compounds substituted normally at the α- or γ-position to the ring nitrogen, 3a, 4a, 4b, 3d, 4d, 8 and 9 , and in addition compounds substituted on the furan ring, 5a, 6a, 5b, 6b, 7b, 5c and 7c which were unexpected compounds. The structures of these compounds were established from the ir, nmr and mass spectra, and x-ray crystal analysis of 5b .