Single-shot polarization-imaging digital holography based on simultaneous phase-shifting interferometry

We propose single-shot digital holography which is capable of simultaneously capturing both the information of multiple phase-shifted holograms and the distribution of the polarization. In this technique, a single image sensor records both the information required for phase-shifting interferometry and that of the polarization states of objects using an array of polarizers. The essence of the technique is the capability of imaging the distribution of the polarization of three-dimensional objects with a single-shot exposure by using the space-division multiplexing of holograms. The validity of the proposed technique was confirmed by the preliminary experiments.     

Observation of transverse polarization asymmetries of charged pion pairs in e+e- annihilation near √s = 10.58 GeV

The interference fragmentation function translates the fragmentation of a quark with a transverse projection of the spin into an azimuthal asymmetry of two final-state hadrons. In e(+)e(-) annihilation the product of two interference fragmentation functions is measured. We report nonzero asymmetries for pairs of charge-ordered π(+)π(-) pairs, which indicate a significant interference fragmentation function in this channel. The results are obtained from a 672 fb(-1) data sample that contains 711 × 10(6) π(+)π(-) pairs and was collected at and near the Υ(4S) resonance, with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider.     

Operation of a 32 GHz gyrotron

The design and operation of a 32 GHz pulsed gyrotron are reported. The device is step-tuned between the TE_1,2 (24.16 GHz) and TE_0,2 (31.78 GHz) modes with cathode voltages ranging from 30 to 40kV and beam current up to 5.0A. Experimental frequencies are in close agreement with the self-consistent calculated values and in the TE_2,2 resonator mode an output peak power of 6kW corresponding to an 18% efficiency was measured by using a fast response calorimeter with a thermal sensitivity of 0.1°C/Wmin.     

Ion–ion interactions of LiPF6 and LiBF4 in propylene carbonate solutions

Self-diffusion coefficients of Li⁺ D_Li⁺, PF₆⁻ D_PF6⁻ and solvent propylene carbonate (PC) D_PC in LiPF₆−PC solutions were determined at 298 K by the pulse gradient spin echo (PGSE) NMR technique over the salt concentration range of 0.1–3.0 M (M = mol dm^– 3). The order of the diffusion coefficients was found to be D_Li⁺ < D_PF6⁻ < D_PC over the concentration range examined, and they were monotonically decreased with increasing the salt concentration. Haven ratio Λ/Λ_NMR, where Λ and Λ_NMR represent the ionic conductivity measured electrochemically and that estimated via the Nernst-Einstein equation using the diffusion coefficient, respectively, was evaluated as the measure of the ion–ion interaction in the LiPF₆–PC solutions. Though Λ/Λ_NMR values for LiPF₆-solutions decrease with increasing the salt concentration, they were greater than those for LiBF₄–PC solutions over the whole concentration range examined, which indicates that the ion pair formation ability of PF₆^– ion is weaker than that of the BF₄^– ion. The smaller value of the ionic conductivity for the highly concentrated LiPF₆–PC solution (above 2.0 M) than that of the LiBF₄-solutions can be attributed to the more rapidly increased viscosity relative to the LiBF₄-solution. Classic molecular dynamics (MD) simulations for the respective LiPF₆ and LiBF₄-solution of 0.5 and 1.0 M were also carried out based on the effective pair potentials. Diffusion coefficients, ionic conductivity and Haven ratio for these solutions were calculated from MD trajectories, and they qualitatively agree with those evaluated by experiments. Pair correlation functions g_LiO(r) (for Li⁺–O (PC) pair) and g_LiPF6(r) (for Li⁺–PF₆^– pair) or g_LiBF4(r) (for Li⁺–BF₄^– pair) revealed that the lithium ion weakly forms the contact ion pairs with PF₆^–, whilst strongly with BF₄^–, which supports the present experimental results. Moreover, the simulation results show that both anions in the contact ion pairs predominantly take the monodentate form, which is in contrast to the multidentate coordination predicted by ab initio calculation in gas phase.     

Dose-dependent inhibition of ultrasound-induced cell killing and free radical production by carbon dioxide

Previous studies have shown that if a solution for cell suspension is saturated with CO(2), ultrasound-induced in vitro cell killing and free-radical production are inhibited. However, the dose dependency of this observation has not been explored. Here, we used NaHCO(3) and HCl to produce a predictable concentration of CO(2) within the culture medium. Using 1 MHz continuous wave 4 W/cm(2) ultrasound, we sonicated U937 cells suspension for 1 min at 37 degrees C with CO(2) at different concentrations. At 2 mM, reduced cell killing was observed that further decreased with increasing CO(2) concentration until 100% protection was attained at 20 mM. Ultrasound-induced free-radical production was significantly decreased at 1 mM and became undetectable at 2 mM CO(2). This finding shows that CO(2)-mediated inhibition is concentration dependent and that the threshold for free-radical production is one order of magnitude higher than the threshold for cell killing induced by ultrasound. In addition, it also cautions researchers when adding acids and acid-based agents to a culture medium, which almost always contains NaHCO(3), in experiments related to the bioeffects of ultrasound.     

Influence of Zn Diffusion on Bandwidth and Extinction in MQW Electroabsorption Modulators Buried with Semi-Insulating InP

A comprehensive analysis of multi-quantum-well electroabsorption modulators buried with semi-insulating (SI)-InP is presented. We quantitatively demonstrate that suppression of Zn diffusion into the burying and optical core layers plays a key role in high-speed and high-extinction operation.     

Fibre raman amplifier properties for applications to long-distance optical communications

This paper reviews recent theoretical and experimental studies on optical amplification by stimulated Raman scattering (Raman amplification) in single-mode optical fibres, and discusses its possible applications to long-distance optical communications. The fibre Raman amplifier can be used as an in-line optical amplifier in both repeaterless and non-regenerative all-optical repeater configurations. In the former application, signal transmission of over 400 km has been predicted theoretically, although high-power pump sources are considered to be required. In the latter configuration, in which optical fibre losses are compensated for by Raman gains, it has been shown that extremely long-distance transmission over more than 1000 km is feasible in terms of signal-to-noise ratio, where the distance achievable is mainly limited by the accumulation of Raman noise. Recent experimental demonstrations including bit-error rate measurements on the Raman amplified signal, and laser-diode pumped amplification, etc., are also reviewed. The results confirm the effectiveness of fibre Raman amplifiers in future long-haul systems.     

Future of low-x forward physics at RHIC

Comparisons of particle production from high-energy ion collisions with next-to-leading order perturbative QCD calculations show good agreement down to moderate transverse momentum values. Distributions of azimuthal angle differences between coincident hadrons in these collisions support a partonic origin to the particle production, again down to moderate transverse momentum values. The rapidity dependence of inclusive and coincident particle production can therefore be used to probe parton distribution functions down to small momentum fractions where theory anticipates that parton saturation could be present. This paper describes how such experiments could be completed.Arrival of the final proofs: 27 July 2005PACS: 12.38 Qk, 13.88. + e, 24.85. + p     

Preparation of Cu2ZnSnS4 thin films by hybrid sputtering

In order to fabricate Cu₂ZnSnS₄ thin films, hybrid sputtering system with two sputter sources and two effusion cells is used. The Cu₂ZnSnS₄ films are fabricated by the sequential deposition of metal elements and annealing in S flux, varying the substrate temperature. The Cu₂ZnSnS₄ films with stoichiometric composition are obtained at the substrate temperature up to 400 °C, whereas the film composition becomes quite Zn-pool at the substrate temperature above 450 °C. The Cu₂ZnSnS₄ film shows p-type conductivity, and the optical absorption coefficient and the band gap of the Cu₂ZnSnS₄ film prepared in this experiment are suitable for fabricating a thin film solar cell.