Preparation and analytical properties of a chelating resin containing phenylalanine groups

A polystyrene-based macroreticular resin containing phenylalanine groups has been prepared and its analytical properties have been investigated and compared with Dowex A-1. The phenylalanine resin shows high selectivity for mercury(II) and copper(II) in the pH region 2-3. The sorption behaviour of copper has been examined in detail, with the intention of using the resin analytically. The important characteristics of the resin are fast equilibration, high selectivity and small volume change between its hydrogen form and metal forms. These enable it to be applied for the rapid concentration of trace amounts of copper in the presence of large amounts of diverse metals. It may be used for the determination of copper in sea-water and the separation of copper/cobalt and copper/nickel.     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Enantiodifferentiating photoaddition of alcohols to 1,1-diphenylpropene in supercritical carbon dioxide: sudden jump of optical yield at the critical density

In the enantiodifferentiating photoaddition of ROH (R = Me, Et, i-Pr) to 1,1-diphenylpropene sensitized by fructosyl 1,4-naphthalenedicarboxylate in supercritical carbon dioxide, the enantiomeric excess of photoadduct increased with increasing bulkiness of the alcohol at all pressures used, with an accompanying sudden jump at the critical density, for which the enhanced clustering of alcohol, particularly in the subcritical pressure region, was revealed to be responsible from the fluorescence spectral examinations.     

Heterolytic cleavage of dihydrogen promoted by sulfido-bridged tungsten-ruthenium dinuclear complexes

A series of sulfido-bridged tungsten-ruthenium dinuclear complexes Cp*W(mu-S)(3)RuX(PPh(3))(2) (4a; X = Cl, 4b; X = H), Cp*W(O)(mu-S)(2)RuX(PPh(3))(2) (5a; X = Cl, 5b; X = H), and Cp*W(NPh)(mu-S)(2)RuX(PPh(3))(2) (6a; X = Cl, 6b; X = H) have been synthesized by the reactions of (PPh(4))[Cp*W(S)(3)] (1), (PPh(4))[Cp*W(O)(S)(2)] (2), and (PPh(4))[Cp*W(NPh)(S)(2)] (3), with RuClX(PPh(3))(3) (X = Cl, H). The heterolytic cleavage of H(2) was found to proceed at room temperature upon treating 5a and 6a with NaBAr(F)(4) (Ar(F) = 3, 5-C(6)H(3)(CF(3))(2)) under atmospheric pressure of H(2), which gave rise to [Cp*W(OH)(mu-S)(2)RuH(PPh(3))(2)](BAr(F)(4)) (7a) and [Cp*W(NHPh)(mu-S)(2)RuH(PPh(3))(2)](BAr(F)(4)) (8), respectively. When Cp*W(O)(mu-S)(2)Ru(PPh(3))(2)H (5b) was treated with a Br?nstead acid, [H(OEt(2))(2)](BAr(F)(4)) or HOTf, protonation occurred exclusively at the terminal oxide to give [Cp*W(OH)(mu-S)(2)RuH(PPh(3))(2)](X) (7a; X = BAr(F)(4), 7b; X = OTf), while the hydride remained intact. The analogous reaction of Cp+W(mu-S)(3)Ru(PPh(3))(2)H (4b) led to immediate evolution of H(2). Selective deprotonation of the hydroxyl group of 7a or 7b was induced by NEt(3) and 4b, generating Cp*W(O)(mu-S)(2)Ru(PPh(3))(2)H (5b). Evolution of H(2) was also observed for the reactions of 7a or 7b with CH(3)CN to give [Cp*W(O)(mu-S)(2)Ru(CH(3)CN)(PPh(3))(2)](X) (11a; X = BAr(F)(4), 11b; X = OTf). We examined the H/D exchange reactions of 4b, 5b, and 7a with D(2) and CH(3)OD, and found that facile H/D scrambling over the W-OH and Ru-H sites occurred for 7a. Based on these experimental results, the mechanism of the heterolytic H(2) activation and the reverse H(2) evolution reactions are discussed.     

Nucleophilic additions of arylzinc compounds to aldehydes mediated by CrCl(3): efficient and facile synthesis of functionalized benzhydrols, 1(3H)-isobenzofuranones, benzyl alcohols, or diaryl ketones

In the presence of a stoichiometric amount of CrCl(3) and trimethylchlorosilane (TMSCl), nucleophilic addition of arylzinc compounds 1c-h to arylaldehydes 2a,b,g smoothly proceeded at room temperature to yield corresponding benzhydrols 4a-f in good yields. From arylzinc compounds 1a,b, 3-aryl-1(3H)-isobenzofuranones 3a-f were given by the CrCl(3)-mediated reaction with arylaldehydes 2a-f. Diaryl ketones 5a-e were obtained in good yields by the addition of excess amount of benzaldehyde as an oxidant to the resulting solution after the CrCl(3)-mediated reaction between arylzinc compounds 1c-g and arylaldehydes 2b,g was completed. In the nucleophilic additions of arylzinc compounds 1a,d,f to alkyladehydes 6b-f, the treatment of arylzinc compounds with CrCl(3) was required prior to the addition of the aldehydes in order to prevent the fast protodezincation of arylzinc compounds by the enolizable aldehydes. In these CrCl(3)-mediated nucleophilic additions of arylzinc compounds to aldehydes, arylchromium(III) species are probably reactive intermediates.     

α- and γ-Regiocontrol and Enantiospecificity in the Copper-Catalyzed Substitution Reaction of Propargylic Phosphates with Grignard Reagents

The regioselectivity (r.s.) and enantiospecificity (e.s.) of the substitution reactions of secondary propargylic alcohol derivatives using reagents derived from ArMgBr and Cu salts were studied. First, the picolinate, 3-methylpicolinate, and diethylphosphonate derivatives of Ph(CH₂)₂CH(OH)C≡CTMS were reacted with PhMgBr/CuCN in ratios of 2.5:2.7–2.5:0.25. The use of 2.5:0.25 ratio in THF/DME (6:1) at 0 °C for 1 h afforded the α-substitution product from the phosphate with ≥98 % r.s. and 99 % e.s. CuBr⋅Me₂S gave similar selectivity. The reaction system was then applied to phosphates derived from R¹CH(OH)C≡CR² and ArMgBr to obtain synthetically sufficient r.s. and e.s. values with R²=TMS, Ph, whereas iPr was borderline in terms of size as an R¹ substituent. The presence of a substituent at the o-position of Ar marginally affected the selectivity. We also found that the use of PhMgBr/Cu(acac)₂ in a 2:1 ratio in THF produced the γ-substitution products (allenes) with high r.s. and e.s.     

Application of DEM modified with enlarged particle model to simulation of bead motion in a bead mill

We applied the discrete element method （DEM） of simulation modified by an enlarged particle model to simulate bead motion in a large bead mill. The stainless-steel bead mill has inner diameter of 102 mm and mill length of 198 mm. The bead diameter and filling ratio were fixed respectively at 0.5 mm and 85%. The agitator rotational speed was changed from 1863 to 3261 rpm. The bead motion was monitored experimentally using a high-speed video camera through a transparent mill body. For the simulation, enlarged particle sizes were set as 3-6 mm in diameter. With the DEM modified by the enlarged particle model, the motion of enlarged particles in a mill was simulated.The velocity data of the simulated enlarged particles were compared with those obtained in the experiment. The simulated velocity of the enlarged particles depends on the virtual frictional coefficient in the DEM model. The optimized value of the virtual frictional coefficient can be determined by considering the accumulated mean value. Results show that the velocity of the enlarged particles simulated increases with an increase in the optimum virtual frictional coefficient, but the simulated velocity agrees well with that determined experimentally by optimizing the virtual frictional coefficient in the simulation. The computing time in the simulation decreases with increased particle size.     

Enantioselective copper-catalyzed 1,4-addition of dialkylzincs to enones using a novel N,N,P–Cu(II) complex

Enantioselective copper-catalyzed 1,4-additions of dialkylzincs to enones were carried out in the presence of 1 mol % of Cu(OTf)₂ and 2.5 mol % of an N,N,P-ligand possessing a tert-butyl group at the adjacent position of the nitrogen of pyridine to afford the corresponding 1,4-adducts in up to 98% ee.