Single-shot polarization-imaging digital holography based on simultaneous phase-shifting interferometry

We propose single-shot digital holography which is capable of simultaneously capturing both the information of multiple phase-shifted holograms and the distribution of the polarization. In this technique, a single image sensor records both the information required for phase-shifting interferometry and that of the polarization states of objects using an array of polarizers. The essence of the technique is the capability of imaging the distribution of the polarization of three-dimensional objects with a single-shot exposure by using the space-division multiplexing of holograms. The validity of the proposed technique was confirmed by the preliminary experiments.     

Evolution of the Kondo effect in a quantum dot probed by shot noise

We measure the current and shot noise in a quantum dot in the Kondo regime to address the nonequilibrium properties of the Kondo effect. By systematically tuning the temperature and gate voltages to define the level positions in the quantum dot, we observe an enhancement of the shot noise as temperature decreases below the Kondo temperature, which indicates that the two-particle scattering process grows as the Kondo state evolves. Below the Kondo temperature, the Fano factor defined at finite temperature is found to exceed the expected value of unity from the noninteracting model, reaching 1.8±0.2.     

Observation of Peregrine solitons in a multicomponent plasma with negative ions

The experimental observation of Peregrine solitons in a multicomponent plasma with the critical concentration of negative ions is reported. A slowly amplitude modulated perturbation undergoes self-modulation and gives rise to a high amplitude localized pulse. The measured amplitude of the Peregrine soliton is 3 times the nearby carrier wave amplitude, which agrees with the theory. The numerical solution of the nonlinear Schr?dinger equation is compared with the experimental results.     

Superconducting characteristics and microstructure of polycrystalline Zn-doped In2O3 films

In order to investigate the relation among the superconducting transition T_c, carrier density n, resistivity ρ and the microstructure in the polycrystalline (In₂O₃)_1?x–(ZnO)_x films, we prepared specimen films by post annealing of amorphous films with x = 0.025 at various annealing temperature T_a and for annealing time t_a = 1 h and 4 h. As for microstructures, we have investigated the distribution of elements by scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS). We have found followings: (1) The annealed films clearly show the superconductivity of which T_c depends on T_a, t_a and n. This indicates that the superconductivity is determined by the combination of crystallinity and carrier density. (2) The data on STEM–EELS spectra mapping of indium plasmon indicate that droplets of the pure indium phase exist inside a film, where the distribution of these droplets dispersed. Therefore, it seems that droplets do not form an electrical conducting path, that is, it is possible that observed superconductivity is due to intrinsic characteristic of polycrystalline (In₂O₃)_1?x–(ZnO)_x films.     

High-speed deposition of RE123 film with large current capacity by hot-wall type PLD system

We have studied a hot-wall heating system to produce GdBa₂Cu₃O_y (GdBCO) films with large critical currents (I_c) at a high production rate by a pulsed-laser-deposition (PLD) method. GdBCO films fabricated at a production rate of 30 m/h under the optimized conditions, especially a distance of 95 mm between the target and the substrate (T–S), exhibited high critical current densities (J_c) of about 3 MA/cm² and I_c over 300 A at a thickness of 1–2 μm. Furthermore, long GdBCO tapes prepared by repeated depositions at each tape-passing speed of 80 m/h showed uniform I_c distribution along the longitudinal direction, because the hot-wall system enabled to stabilize temperature within a few degrees at 800 °C. A 170 m long tape with I_c over 600 A was successfully fabricated at a production rate of 16 m/h using a laser power of 360 W.     

Ion–ion interactions of LiPF6 and LiBF4 in propylene carbonate solutions

Self-diffusion coefficients of Li⁺ D_Li⁺, PF₆⁻ D_PF6⁻ and solvent propylene carbonate (PC) D_PC in LiPF₆−PC solutions were determined at 298 K by the pulse gradient spin echo (PGSE) NMR technique over the salt concentration range of 0.1–3.0 M (M = mol dm^– 3). The order of the diffusion coefficients was found to be D_Li⁺ < D_PF6⁻ < D_PC over the concentration range examined, and they were monotonically decreased with increasing the salt concentration. Haven ratio Λ/Λ_NMR, where Λ and Λ_NMR represent the ionic conductivity measured electrochemically and that estimated via the Nernst-Einstein equation using the diffusion coefficient, respectively, was evaluated as the measure of the ion–ion interaction in the LiPF₆–PC solutions. Though Λ/Λ_NMR values for LiPF₆-solutions decrease with increasing the salt concentration, they were greater than those for LiBF₄–PC solutions over the whole concentration range examined, which indicates that the ion pair formation ability of PF₆^– ion is weaker than that of the BF₄^– ion. The smaller value of the ionic conductivity for the highly concentrated LiPF₆–PC solution (above 2.0 M) than that of the LiBF₄-solutions can be attributed to the more rapidly increased viscosity relative to the LiBF₄-solution. Classic molecular dynamics (MD) simulations for the respective LiPF₆ and LiBF₄-solution of 0.5 and 1.0 M were also carried out based on the effective pair potentials. Diffusion coefficients, ionic conductivity and Haven ratio for these solutions were calculated from MD trajectories, and they qualitatively agree with those evaluated by experiments. Pair correlation functions g_LiO(r) (for Li⁺–O (PC) pair) and g_LiPF6(r) (for Li⁺–PF₆^– pair) or g_LiBF4(r) (for Li⁺–BF₄^– pair) revealed that the lithium ion weakly forms the contact ion pairs with PF₆^–, whilst strongly with BF₄^–, which supports the present experimental results. Moreover, the simulation results show that both anions in the contact ion pairs predominantly take the monodentate form, which is in contrast to the multidentate coordination predicted by ab initio calculation in gas phase.     

Characterization of preformed plasmas with an interferometer for ultra-short high-intensity laser-plasma interactions

The evolution of an Al preformed plasma produced by a prepulse was observed before and after the arrival of the main pulse by an interferometer using a femtosecond probe pulse. A central density depression due to the ponderomotive force of the main laser pulse in the preformed plasma with a 100 m scale length was clearly visible after the main pulse irradiation at an intensity of 5×10¹⁶ W/cm². The temporal profiles of the prepulse, characterized by a cross-correlation in conjunction with a precise density profile measurement by an interferometer, contribute to the better understanding of femtosecond laser-matter interactions. PACS 52.38.-r; 52.50.Jm; 52.70.-m     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.     

Influence of Zn Diffusion on Bandwidth and Extinction in MQW Electroabsorption Modulators Buried with Semi-Insulating InP

A comprehensive analysis of multi-quantum-well electroabsorption modulators buried with semi-insulating (SI)-InP is presented. We quantitatively demonstrate that suppression of Zn diffusion into the burying and optical core layers plays a key role in high-speed and high-extinction operation.     

Fibre raman amplifier properties for applications to long-distance optical communications

This paper reviews recent theoretical and experimental studies on optical amplification by stimulated Raman scattering (Raman amplification) in single-mode optical fibres, and discusses its possible applications to long-distance optical communications. The fibre Raman amplifier can be used as an in-line optical amplifier in both repeaterless and non-regenerative all-optical repeater configurations. In the former application, signal transmission of over 400 km has been predicted theoretically, although high-power pump sources are considered to be required. In the latter configuration, in which optical fibre losses are compensated for by Raman gains, it has been shown that extremely long-distance transmission over more than 1000 km is feasible in terms of signal-to-noise ratio, where the distance achievable is mainly limited by the accumulation of Raman noise. Recent experimental demonstrations including bit-error rate measurements on the Raman amplified signal, and laser-diode pumped amplification, etc., are also reviewed. The results confirm the effectiveness of fibre Raman amplifiers in future long-haul systems.