On facets existed on concave interfaces in Czochralski-grown GaSb crystals

It is tried to make facet regions grow on interfaces curved concavely toward the melt using the Czochralski method. By increasing rapidly the pulling rate of crystals, the whole growth interface is once remelted and a concave interface is formed in the following growth process. A facet region occurs from a (¯I¯I¯I) plane which appears by the remelt of interfaces. This facet continues to grow while it is being surrounded by concave interfaces of nonfacet regions. From the microscopic measurement of spreading resistance. the impurity concentration is higher in the facet region than in non-facet ones. This suggests that the growth mechanism of the facet on concave interfaces is the same as that on convex ones.     

Mechanochromic Delayed Fluorescence Switching in Propeller-Shaped Carbazole–Isophthalonitrile Luminogens with Stimuli-Responsive Intramolecular Charge-Transfer Excited States

Herein, the universal design of high-efficiency stimuli-responsive luminous materials endowed with mechanochromic luminescence (MCL) and thermally activated delayed fluorescence (TADF) functions is reported. The origin of the unique stimuli-triggered TADF switching for a series of carbazole–isophthalonitrile-based donor–acceptor (D–A) luminogens is demonstrated based on systematic photophysical and X-ray analysis, coupled with theoretical calculations. It was revealed that a tiny alteration of the intramolecular D–A twisting in the excited-state structures governed by the solid morphologies is responsible for this dynamic TADF switching behavior. This concept is applicable to the fabrication of bicolor emissive organic light-emitting diodes using a single TADF emitter.     

Piezoelectric immunosensor for bisphenol A based on signal enhancing step with 2-methacrolyloxyethyl phosphorylcholine polymeric nanoparticle

An immunoassay in which BPA competed with a BPA-horseradish peroxidase conjugate for binding to anti-BPA antibodies, coupled to a piezoelectric (PZ) immunosensor, was able to detect 0.1 ng mL(-1) BPA. To enhance the sensitivity of the assay, we tested nanoparticles approximately 200 nm in diameter, coupled to anti-BPA antibodies, to increase the mass change on the surface of the immunosensor and thereby increase the frequency shift detected. This second step, using nanoparticles coated with anti-BPA antibodies, improved the sensitivity of the assay by approximately eight times at BPA concentrations below 10 ng mL(-1). Field emission-scanning electron microscopy (FE-SEM) showed that polymeric 2-methacrolyloxyethyl phosphorylcholine (MPC) nanoparticles coupled to antibodies remained monodisperse on the surface of the immunosensor and therefore produced stable signals in the immunosensors. Since the frequency shift detected in the assay mainly originated from the mass change on the surface of the PZ crystal, the colloidal stability of the antibody-conjugated particles used in the enhancement step played an extremely important role in achieving a stable and highly sensitive signal.     

Structures of 17,19-hexatriacontadiyne monolayers on Au(111) studied by infrared reflection absorption spectroscopy and scanning tunneling microscopy

The aggregation and reaction of 17,19-hexatriacontadiyne molecules are studied on a Au(111) surface. The molecular orientation and arrangement are elucidated by infrared reflection absorption spectroscopy (IRAS) and scanning tunneling microscopy (STM). A vapor-deposited monolayer and a multilayered film formed by adsorption from the solution provide IRA spectra with bands due to the antisymmetric and symmetric stretching of methylenes in the gauche conformation. After the adsorbed film is rinsed with the solvent, however, the spectrum loses the gauche bands and is characterized by the enhanced C-H(distal) and C-H(proximal) stretching bands, which means that all-trans molecules are laid flat. Only STM images for the rinsed film display columnar structures on the herringbones of the reconstructed Au(111) surface; the alkyl chain direction is found to be parallel to the Au atom row. The results indicate that an ordered monolayer is formed first at the liquid-solid interface, and then, disordered overlayers with the gauche conformation are grown but removed by a rinse. Upon exposure to UV light, thus obtained monomer columns are converted into oligomers with flexible backbones and an increased gauche population in the alkyl chains, which resemble red phase polydiacetylenes in LB films.     

Chiral zirconium catalysts using multidentate BINOL derivatives for catalytic enantioselective Mannich-type reactions; ligand optimization and approaches to elucidation of the catalyst structure

Catalytic enantioselective Mannich-type reactions of silicon enolates with aldimines were investigated using chiral zirconium catalysts prepared from Zr(O(t)Bu)(4), N-methylimidazole, and newly designed multidentate BINOL derivatives. These new multidentate BINOL ligands were designed on the basis of an assumed transition state structure of a chiral zirconium catalyst derived from two molecules of (R)-6,6'-Br(2)-BINOL. Not only tetradentate BINOL 4 but also tridentate BINOL derivatives were found to be effective, and high enantioselectivities were attained. In a structural study of the most effective zirconium complex prepared from tridentate ligand 6e, several NMR experiments and DFT calculations were carried out. Consequently, the structure of an active catalyst and plausible mechanism of asymmetric induction were elucidated.     

Conformation of solvent N,N-dimethylpropionamide in the coordination sphere of the zinc(II) ion studied by Raman spectroscopy and DFT calculations

Solvation structure of the zinc(II) ion in N,N-dimethylpropionamide (DMPA) was studied by Raman spectroscopy at varying temperature and by quantum mechanical calculations. No significant ion-pair formation was found for the Zn(ClO4)2 solution in the molality range m(Zn) < 1.5 mol kg(-1), and the solvation number of the zinc(II) ion was determined to be 4, indicating that 6-coordination of DMPA is sterically hindered. Interestingly, DMPA molecules are under equilibrium between planar cis and nonplanar staggered conformers, and the latter is more preferred in the coordination sphere, while the reverse is the case in the bulk. The DeltaG degrees , DeltaH degrees , and TDeltaS degrees values of conformational change from planar cis to nonplanar staggered in the coordination sphere were obtained to be -0.9, -8.5, and -7.5 kJ mol(-1), respectively. Density functional theory (DFT) calculations show that the planar cis conformer is more favorable than the nonplanar staggered one in the 1:2 cluster, as is the case for a single DMPA molecule and H(DMPA)+, indicating that there hardly occurs solvent-solvent interaction through the metal ion in the Zn2+-DMPA 1:2 cluster. On the other hand, the SCF energy of [Zn(planar cis-DMPA)4-n(nonplanar staggered DMPA)n]2+ (n = 0-4) decreases with increasing n, implying that the nonplanar staggered conformer is preferred in the solvate ion. It is thus concluded that solvent-solvent interaction through space, or solvation steric effect, plays a crucial role in the conformational equilibrium in the coordination sphere of the four-solvate metal ion.     

Mannose‐Binding Geometry of Pradimicin A

Pradimicins (PRMs) and benanomicins are the only family of non‐peptidic natural products with lectin‐like properties, that is, they recognize D ‐mannopyranoside (Man) in the presence of Ca²⁺ ions. Coupled with their unique Man binding ability, they exhibit antifungal and anti‐HIV activities through binding to Man‐containing glycans of pathogens. Notwithstanding the great potential of PRMs as the lectin mimics and therapeutic leads, their molecular basis of Man recognition has yet to be established. Their aggregate‐forming propensity has impeded conventional interaction analysis in solution, and the analytical difficulty is exacerbated by the existence of two Man binding sites in PRMs. In this work, we investigated the geometry of the primary Man binding of PRM‐A, an original member of PRMs, by the recently developed analytical strategy using the solid aggregate composed of the 1:1 complex of PRM‐A and Man. Evaluation of intermolecular distances by solid‐state NMR spectroscopy revealed that the C2–C4 region of Man is in close contact with the primary binding site of PRM‐A, while the C1 and C6 positions of Man are relatively distant. The binding geometry was further validated by co‐precipitation experiments using deoxy‐Man derivatives, leading to the proposal that PRM‐A binds not only to terminal Man residues at the non‐reducing end of glycans, but also to internal 6‐substituted Man residues. The present study provides new insights into the molecular basis of Man recognition and glycan specificity of PRM‐A.     

Chemical-Synthesis-Based Approach to Glycoprotein Functions in the Endoplasmic Reticulum

The introduction of Asn-linked glycans to nascent polypeptides occurs in the lumen of the endoplasmic reticulum of eukaryotic cells. After the removal of specific sugar residues, glycoproteins acquire signals in the glycoprotein quality control (GPQC) system and enter the folding cycle composed of lectin-chaperones calnexin (CNX) and calreticulin (CRT), glucosidase II (G-II), and UDP-Glc:glycoprotein glucosyltransferase (UGGT). G-II initiates glycoproteins’ entry and exit from the cycle, and UGGT serves as the “folding sensor”. This account summarizes our effort to analyze the properties of enzymes and lectins that play important roles in GPQC, especially those involved in the CNX/CRT cycle. To commence our study, general methods for the synthesis of high-mannose-type glycans and glycoproteins were established. Based on these, various substrates to analyze components of the GPQC were created, and properties of CRT, G-II, and UGGT have been clarified.     

Dimeric and trimeric tetrathiafulvalenes with strong intramolecular interactions in the oxidized states

New dimeric and trimeric TTF derivatives with methylenedithio spacers (1a,b, 2a, and 2b) have been synthesized. X-ray structure analysis revealed that TTF units of the dimer 1b adopted distorted face-to-face overlapping arrangement both in intra- and intermolecular stacking. Cyclic voltammetric study indicated that trimeric 2a was in favor of taking di- and tetracationic states, while the dimeric 1a was in favor of taking a monocation. The absorption spectroscopic study suggested an existence of the strong face-to-face interaction particularly in di-, tri-, and tetracationic state of the trimeric TTF derivatives.