Sensitized luminescence properties of dinuclear lanthanide macrocyclic complexes bearing a benzophenone antenna

Dinuclear lanthanide (Ln=Tb³⁺ or Eu³⁺) complexes (Ln₂L2) of two octadentate macrocyclic polyaminopolycarboxylic ligands connected through a benzophenone (BP) moiety (L2) have been synthesized. Sensitized luminescence properties of Ln₂L2 in water have been studied in comparison to those of BP-conjugated mononuclear Ln complexes (LnL1). The luminescence intensity of Tb₂L2 is lower than that of TbL1 because of lower triplet quantum yield of the BP moiety. In contrast, Eu₂L2 shows higher intensity than EuL1. For both Eu complexes, energy level of triplet excited-state BP (³BP*) is only 3 kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺. The ⁵D₂ state formed by a triplet-energy transfer (TET) from ³BP* is therefore deactivated by a back energy transfer (BET) to the ground-state BP, resulting in low luminescence intensity of EuL1. In contrast, within Eu₂L2, TET from ³BP* to ⁵D₀ state of two Eu³⁺ ions is accelerated, thus leading to higher luminescence intensity. Another notable feature of Eu₂L2 is the luminescence quantum yield independent of its concentration. In contrast, for EuL1 system, an intermolecular BET occurs from ⁵D₂ state of Eu³⁺ to the ground-state BP conjugated to another EuL1 complex, resulting in a yield decrease with the concentration increase.     

Operating characteristics of near-infrared self-assembled polymer microlasers

We report near-infrared laser emission from self-assembled luminescent polymer microcavities. The microrings are formed around silica optical fibers of varying diameters (80, 125, and 200 microm) and are shown to exhibit photopumped lasing at approximately 820 nm. The microrings with 200 mum inner diameter have an overall quality factor of approximately 2 x 10(3), which is limited by surface roughness and scattering. We illustrate how the laser threshold varies inversely with both the quality factor and the diameter of the microrings. The free spectral range and the intensity variation of the laser output are also presented.     

Application of the Tris(acetylacetonato)iron(III)/(II) Redox Couple in p‐Type Dye‐Sensitized Solar Cells

An electrolyte based on the tris(acetylacetonato)iron(III)/(II) redox couple ([Fe(acac)₃]^0/1?) was developed for p‐type dye‐sensitized solar cells (DSSCs). Introduction of a NiO blocking layer on the working electrode and the use of chenodeoxycholic acid in the electrolyte enhanced device performance by improving the photocurrent. Devices containing [Fe(acac)₃]^0/1? and a perylene–thiophene–triphenylamine sensitizer (PMI–6T–TPA) have the highest reported short‐circuit current (J_SC=7.65 mA cm^?2), and energy conversion efficiency (2.51 %) for p‐type DSSCs coupled with a fill factor of 0.51 and an open‐circuit voltage V_OC=645 mV. Measurement of the kinetics of dye regeneration by the redox mediator revealed that the process is diffusion limited as the dye‐regeneration rate constant (1.7×10⁸ M ^?1 s^?1) is very close to the maximum theoretical rate constant of 3.3×10⁸ M ^?1 s^?1. Consequently, a very high dye‐regeneration yield (>99 %) could be calculated for these devices.     

Efficient Synthesis,Structure, and Complexation Studies of Electron‐Donating Thiacalix[n]dithienothiophene

A series of thiacalix[n]dithiothiophenes (n=4–10) was prepared by a facile method and X‐ray analysis was used to determine the molecular structures of square‐ (4‐mer) and pentagonal‐shaped macrocycles (5‐mer). In the cyclic voltammograms, reversible multielectron redox processes, which are due to electronic delocalization, were observed at low oxidation potentials. The cyclic 4‐mer acted as a “Janus‐head” cavitand for two C₆₀ molecules, whereas the 5‐ and 6‐mer formed stable 1:1 complexes with C₆₀ .     

Catalytic Enantioselective Reaction of α‐Phenylthioacetonitriles with Imines Using Chiral Bis(imidazoline)–Palladium Catalysts

The catalytic enantioselective reaction of α‐phenylthioacetonitriles with imines has been developed. The reaction of various imines proceeds in good yields and diastereo‐ and enantioselectivities in the presence of chiral bis(imidazoline)–palladium catalysts. The obtained products can be converted into β‐aminonitrile or β‐aminoamide compounds without loss of enantiopurity.     

Stacked 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes: dimer and conjugated microporous polymer

A new [2.2]paracyclophane compound consisting of two 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes stacked in proximity to each other. The compound exhibited a unique absorption band (cyclophane band) and an emission from the phane state, both of which were derived from the π-π stacking of the poorly extended conjugation systems of 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzene. In addition, a conjugated microporous polymer (CMP) that comprises pseudo-para-substituted [2.2]paracyclophane was prepared. The obtained CMP is regarded as a polymer, in which 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes are infinitely stacked to form a network structure. The CMP exhibited a type I nitrogen gas sorption profile and an H4-like hysteresis loop, and possessed the slit-like mesopores with a BET surface area of 501 m² g⁻¹.     

Selective photocatalytic oxidation of alcohols to aldehydes in water by TiO2 partially coated with WO3

Semiconductor TiO₂ particles loaded with WO₃ (WO₃/TiO₂), synthesized by impregnation of tungstic acid followed by calcination, were used for photocatalytic oxidation of alcohols in water with molecular oxygen under irradiation at λ>350 nm. The WO₃/TiO₂ catalysts promote selective oxidation of alcohols to aldehydes and show higher catalytic activity than pure TiO₂. In particular, a catalyst loading 7.6 wt % WO₃ led to higher aldehyde selectivity than previously reported photocatalytic systems. The high aldehyde selectivity arises because subsequent photocatalytic decomposition of the formed aldehyde is suppressed on the catalyst. The TiO₂ surface of the catalyst, which is active for oxidation, is partially coated by the WO₃ layer, which leads to a decrease in the amount of formed aldehyde adsorbed on the TiO₂ surface. This suppresses subsequent decomposition of the aldehyde on the TiO₂ surface and results in high aldehyde selectivity. The WO₃/TiO₂ catalyst can selectively oxidize various aromatic alcohols and is reusable without loss of catalytic activity or selectivity.     

Mapping of the primary mannose binding site of pradimicin A

Pradimicin A (PRM-A) is an actinomycete-derived antibiotic with the lectin-like property of being able to recognize D-mannopyranoside (Man) in the presence of Ca(2+) ion. PRM-A and its derivatives have been attracting a great deal of attention as the only family of natural carbohydrate receptors with nonpeptidic skeleton and, more recently, as conceptually novel drug candidates for human immunodeficiency virus (HIV). Despite its scientific interest and potential therapeutic importance, understanding how PRM-A recognizes Man has been severely limited. Conventional interaction analysis of PRM-A with Man in solution has been frustrated by aggregation of PRM-A and the three-component equilibrium consisting of the [PRM-A(2)/Ca(2+)], [PRM-A(2)/Ca(2+)/Man(2)], [PRM-A(2)/Ca(2+)/Man(4)] complexes, and their mixed oligomers. In this Article, we demonstrate the interaction analysis of PRM-A with methyl α-D-mannopyranoside (Man-OMe) in the solid state, which benefits from aggregate-forming propensity of PRM-A and eliminates the problem associated with the complicated equilibrium in solution. Isothermal titration calorimetry (ITC) analysis and coprecipitation experiments revealed that the primary Man binding of PRM-A is markedly tighter than the secondary one, leading to preparation of the solid aggregate solely composed of the [PRM-A(2)/Ca(2+)/Man-OMe(2)] complex. The simple 1:1 complexes of biosynthetically (13)C-enriched PRM-As and [(13)C(6)]Man-OMe facilitated the analysis of the primary Man binding of PRM-A by two-dimensional dipolar-assisted rotational resonance (2D-DARR), which clearly identified that the cavity consisted of D-alanine moiety and ABC rings of PRM-A is the Man binding site. Interestingly, the proposed Man binding site of PRM-A seems to resemble the typical architecture of artificial carbohydrate receptors.