Microgravity experiments on colloidal crystallization of silica spheres in the presence of sodium chloride

 Rate coefficients (k) in the colloidal crystallization of monodispersed silica spheres in the presence of sodium chloride are studied in microgravity achieved by parabolic flights of an aircraft. Time-resolved reflection spectroscopy is made with a continuous circulating-type stopped-flow cell system. The k values decrease as the salt concentration increases both at 0 and 1 G and those in microgravity are smaller than those in normal gravity by 16% (maximum), especially in water and in the presence of a small amount of the salt lower than 2 × 10⁻⁶ mol/l. The rates in flight at 1 G are larger by 15% (maximum) compared with those at 1 G on the ground. The k values obtained at 0 G, 1 G in flight and 1 G on the ground agree excellently with each other for the suspensions with 3 × 10⁻⁶ and 4 × 10⁻⁶ mol/l sodium chloride. Disappearance of the downward diffusion of spheres and no convection of the suspensions are important for retardation in microgravity. Received: 20 January 2000 Accepted: 9 March 2000     

Reactivity of cobaloxime bound to polystyrene chain by carbon–cobalt σ bond

The (alkyl)-bis(dimethylglyoximato)pyridinecobalt attached to polychloromethylstyrene by a cobalt–carbon bond was prepared by the reaction of Co(II)(DH)₂Py with polychloromethylstyrene in benzene. The fraction of p-vinylbenzyl·Co(DH)₂Py introduced to the polymer was 8.1 and 2.1 mole %. The photodecomposition of the polymer-bonded cobaloxime was investigated by following the change of the visible spectrum. The rate constant k_dec of the polymer-bonded cobaloxime was 1.1 × 10^?2 sec^?1 in benzene; it is one-fourth of that of its monomeric analog, benzyl·Co(DH)₂Py. The k_dec values of the cobaloximes were also measured in benzene–dimethyl sulfoxide mixed solvents, and the polymer effects were discussed. The dependence of the photodecomposition on energy of the irradiation light was investigated, and it was found that the absorption band near 470 nm is important for the photodecomposition of the cobalt–carbon bond. Spectroscopic measurements of the ligand exchange reaction of polymer-bonded cobaloxime with pyridine in dimethyl sulfoxide gave a larger equilibrium constant (1.2 × 10⁴ liter/mole) than that of benzyl·Co(DH)₂Py (9.4 × 10² liter/mole). The kinetic data of the ligand exchange reaction indicated that the larger equilibrium constant for the polymeric system is due to the smaller rate constant of the reverse reaction. The thermodynamic parameters were also obtained.     

General Method to Increase Carboxylic Acid Content on Nanodiamonds

Carboxylic acid is a commonly utilized functional group for covalent surface conjugation of carbon nanoparticles that is typically generated by acid oxidation. However, acid oxidation generates additional oxygen containing groups, including epoxides, ketones, aldehydes, lactones, and alcohols. We present a method to specifically enrich the carboxylic acid content on fluorescent nanodiamond (FND) surfaces. Lithium aluminum hydride is used to reduce oxygen containing surface groups to alcohols. The alcohols are then converted to carboxylic acids through a rhodium (II) acetate catalyzed carbene insertion reaction with tert–butyl diazoacetate and subsequent ester cleavage with trifluoroacetic acid. This carboxylic acid enrichment process significantly enhanced nanodiamond homogeneity and improved the efficiency of functionalizing the FND surface. Biotin functionalized fluorescent nanodiamonds were demonstrated to be robust and stable single-molecule fluorescence and optical trapping probes.     

Formation of an exciplex with mixed ligands in the mercury-photosensitized luminescence of alcohol-amine mixtures in the liquid phase

The liquid-phase mercury-photosensitized luminescence of tert-butyl alcohol (TL)-tert-butylamine (TM) mixtures has been investigated by a steady-state illumination method over a wide range of substrate concentrations. The emission bands from exciplexes (HgTL* and HgTM*) between an excited mercury atom and an alcohol or an amine molecule were observed at about 330 nm and 370 nm, respectively, in TL and TM solutions in cyclohexane. Two other bands appeared at 405 nm and 455 nm for TM at high concentrations. These bands were previously assigned to two types of 1:2 exciplexes (HgTM(2)* and HgTM(2)**). In TL-TM mixed solutions, a new band appeared at about 400 nm. The intensity of this band increased with increasing concentrations of TL and TM. This band was attributed to an exciplex with mixed ligands (HgTLTM*). This band was observed for the first time in this study. The energized intermediate, (HgTLTM*)(not equal), formed between HgAL* and AM can be effectively stabilized by collisions with solvent molecules in solution, while it decomposes to HgAM* and AL in the gas phase. The results for TL-TM mixtures can be explained by the proposed reaction mechanism.     

Studies on interactions of excited cadmium and mercury atoms with secondary and tertiary alkyl- and silylamines in gas phase

The Cd(³P₁)- and Hg(³P₁)-photosensitized emissions of some secondary and tertiary alkyl- and silylamines have been investigated under conditions of steady illumination at 493 and 298 K, respectively. The emission bands were observed at around 440 nm in the cadmium-photosensitized reactions of these amines. In contrast, no appreciable emission bands were observed in the mercury-photosensitized reactions of these amines. However, upon addition of tert-butyl alcohol to the amine-mercury system, an emission band evolved at around 350 nm in the mercury-photosensitization. The peak-wavelengths for secondary and tertiary alkyl- and silylamines are slightly shorter than the values predicted from the correlations between the peak wavelength and the first ionization energy obtained in the cadmium- and mercury-photosensitized luminescence of ammonia and primary amines. The quenching efficiencies of the cadmium and mercury resonance lines by secondary alkyl- and silylamines are higher than those by tertiary alkyl- and silylamines. These observations suggest that the steric hindrance by the alkyl and silyl groups to the approach of the nitrogen atom in the amines to excited cadmium and mercury atoms seems to be an important factor for the stabilization of the exciplexes and the quenching of the resonance lines. The behavior of silylamines is similar to that of alkylamines in cadmium- and mercury-photosensitized reactions.     

Effect of the Conformation of Polymer Chain on the Reduction Rate of Polyacrylatopentaamminecobalt(III) by Polymer-Bound Ferrous Chelates and the Excited State of Tris(Bipyridine)Ruthenium(Ii)

Electron transfer reactions of Co(NH₃)₅PAA (PAA = polyacrylic acid) with either the polyanionic polymer-bound ferrous chelate, Fe¹¹P-SS (P-SS = vinylbenzylaminediacetate-co-styrenesulfonate) or the uncharged polymer-bound ferrous chelate, Fe¹¹P-VPRo (P-VPRo = vinylbenzylaminediacetate-co-vinylpyrrolidone), and the Ru(bpy)²⁺ ₃ photosensitized reduction of Co(NH₃)₅PAA have been investigated in aqueous solutions at pH 5.4, I = 0.06 (I is ionic strength), and 25°C. For the ferrous chelate reductions, the second-order rate constants for Fe¹¹-PSS and Fe¹¹P-VPRo were almost equal to that for the corresponding nonpolymer-bound ferrous chelate, Fe¹¹BDA (BDA = benzylaminediacetate). The results indicate that there is no appreciable steric hindrance due to the polymer chains of the polymer-bound ferrous chelates and that the effect of columbic repulsion force between the polyanion chains can be ignored for the reaction of Co(NH₃)₅PAA with Fe¹¹P-SS. The results also suggest that there are two kinds of the pendant Co(III) species, “reactive” and “inert.” The inert Co(III) species are shielded by the polymer chains from attack of the Fe(II) chelates that are present in the bulk solutions. A similar reaction behavior was observed in the Ru(bpy)²⁺ ₃ photosensitized reduction of Co(NH₃)₅PAA at pH 5.4. For the Co(III) complex having an extremely few Co(III) complex moieties on the polymer chain, almost all of the Co(III) groups were hardly reduced by the excited state of Ru(bpy)²⁺ ₃, and reverse quenching occurred due to binding of the Ru(bpy)²⁺ ₃ to the polyacrylic acid chain of the polymer complex. On the other hand, for Co(NH₃)₅PAA with a relatively large number of the Co(III) moieties on the polymer chain, lifetime measurements at a higher concentration of the Ru(bpy)²⁺ ₃ showed a double-exponential fit, which suggests that there are two parallel decay processes. The fast and slow components mainly correspond to the decays: Ru(bpy)²⁺ ₃ quenched by Co(III) and reverse quenching due to binding of Ru(bpy)²⁺ ₃ into the compact polymer chains.     

A Convenient Synthesis of Sphingosine and Ceramide from D-Xylose or D-Galactose

Ceramide, i.e., N-fatty acylated sphingosine and its homolog, is a highly heterogeneous and hydrophobic component of the glycosphingolipids¹ such as gangliosides,² which may play important roles in the surface region of the biological membranes.     

SUPER TOUGH GELS WITH A DOUBLE NETWORK STRUCTURE

 Living tissues work with fantastic functions in soft and wet gel-like state. Thus, hydrogels have attracted much attention as excellent soft & wet materials, suitable for making artificial organs for medical treatments.However, conventional hydrogels are mechanically too weak for practical uses. We have created double network (DN) hydrogels with extremely high mechanical strength in order to overcome this problem. DN gels are interpenetrating network (IPN) hydrogels consisting of rigid polyelectrolyte and soft neutral polymer. Their excellent mechanical properties cannot be explained by the standard fracture theories. In this paper, we discuss about the toughening mechanism of DN gels in accordance with their characteristic behavior, such as large hysteresis and necking phenomenon. We also describe the results on tissue engineering application of DN gels.     

Indirect determination of sub-ng ml-1 levels of phosphorus in waters by di-isobutyl ketone extraction of reduced molybdoantimonylphosphoric acid an

Reduced molybdoantimonylphosphoric acid is extracted into di-isobutyl ketone (DIBK) and phosphorus in the extract is indirectly determined by inductively-coupled plasma emission spectrometric measurement of the Mo II 202.03-nm or Sb I 206.83-nm line. Washing of the extract with acid is unnecessary because of the low solubility of DIBK in water. Arsenic(III), Si, Ge, Fe(III) and most anions do not cause serious interference but arsenic(V) must be absent. The detection limits are 5.2 and 45 pg P ml^-1, and the relative standard deviations for 1 μg of phosphorus are 2.0% and 2.5%, for molybdenum and antimony measurements, respectively. The method is applied in the analysis of river and seawater.     

A perfect one-factorization ofK 36

In this paper, a perfect one-factorization ofK ₃₆ is given, which is factor-1-rotational.