Distribution of polymer deposition in plasma polymerization. III. Effect of discharge power

Distribution of polymer deposition in an inductively coupled rf discharge system is studied as a function of level of discharge power with acetylene and styrene as monomers. When a fixed flow rate is used, the discharge power has a relatively small effect on the pattern of distribution of polymer deposition as long as values of W/FM, where W is discharge wattage, F is flow rate, and M is molecular weight of monomer, are maintained above a critical level to maintain full glow in the reaction tube. It has been shown that plasma polymerization of two monomers which have different molecular weights can be compared in a fair manner by selecting conditions to yield similar value of W/FM.     

Plasma polymerization of tetrafluoroethylene. III. Reproducibility and effects of substrate and reactor materials

Plasma polylmerization occurs in plasmas surrounded by surfaces and polymer formation is one of the complicated interactions that take place between active species and molecules which constitute surfaces and gas phases. Effects of reactor wall, substrate materials, flow rate, and discharge power on polymer formation, and properties of polymer deposits were investigated by ESCA, IR (infrared) spectroscopy, and the measurement of system pressure. The effect of surface is important at the initial stage of plasma polymerization which can be easily detected by the system pressure change; however, integrated properties such as IR spectroscopy and the deposition rate show the effect in a less pronounced manner. ESCA, which reflects the properties of surface (approximately 20 A? in depth), showed the effect of surface in an even less sensitive manner. The amount and properties (including the effects of surfaces) are dependent on plasma polymerization parameter W/FM(W, wattage; F, volume flow rate; and M, molecualar weight of monomer) and the location of deposition within a reactor. IR and ESCA data clearly showed the dependence of polymer properties on W/FM; i.e., increase of W and decrease of M to be equivalent. When all these factors were kept under control, the reproducibility of plasma polymerization was found to be excellent.     

Vaporization and thermal decomposition of transition metal salts in flameless atomic absorption spectrometry with a carbon tube atomizer

Vaporization and thermal decomposition of Cr, Mn, Fe, Co, Ni and Cu salts were investigated by measuring the absorption spectra observed when aqueous solutions of these salts were heated in the carbon tube atomizer. Gaseous metal halides are vaporized in the atomizer at temperatures above 300–500° C. SO₂ and NO are produced by thermal decomposition of metal sulfates and nitrates, respectively. The vaporization of metal halides is also confirmed by the spectra for solutions of metals in hydrochloric acid and for mixtures of metal nitrates and ammonium halides.     

Solid sampling technique for direct detection of condensed tannins in bark by matrix-assisted laser desorption/ionization mass spectrometry

A novel method for the direct analysis of condensed tannin components in bark was developed on the basis of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) combined with a simple solid sampling technique. The MALDI mass spectra obtained from the wood (bark) powder sample clearly showed a series of peaks corresponding to the sodium ion adducts of condensed tannin oligomers up to around m/z 3000. The results indicate that the condensed tannins in the bark sample used in this work mostly consist of combinations of flavan-3-ol units such as profisetinidin (PF), prorobinetinidin (PR) and prodelphinidin (PD), at least up to 10-mers (m/z approximately 3000).     

Polymerization of para-xylylene derivatives (parylene polymerization). I. Deposition kinetics for parylene N and parylene C

Kinetic aspects of parylene N [unsubstituted poly(para-xylylene)] and Parylene C [monochlorosubstituted poly(para-xylylene)] were studied. The conversion of starting material (dimer of either p-xylylene or chloro-para-xylylene) to polymer is quantitative (ca. 100%). Consequently, the total polymer formed in a closed system is directly proportional to the amount of dimer charged. However, the percentage of the total amount of polymer formed which deposits on substrate surfaces, placed in the deposition chamber, as well as the polymer film growth rate are dependent on operational factors such as the temperature of the substrate, sublimation of dimer temperature, flow pattern of the reactive species, etc. Parylene C, being a heavier and more polar molecule, has the tendency to deposit easily in the deposition chamber compared to the deposition of Parylene N. Parylene C also has a higher ceiling temperature for deposition than Parylene N. This situation has been investigated from the viewpoint of excess thermal energy which hinders polymer formation (deposition) due to the exceedingly high entropy change necessary for polymer deposition to occur. The addition of a cool (i.e., room temperature) inert gas was shown to increase the deposition of Parylene N on substrate surfaces placed in the deposition chamber. The deposition increase and acceleration of deposition (film growth) rate were found to be related to the size and molecular weight of the inert gas pressure maintained in the system. The accelerating effect is explained by the increase in third-body collisions to dissipate the excess thermal energy of the reactive species.     

Fouling and protein adsorption effect of low-temperature plasma treatment of membrane surfaces

Adsorption of proteins and the effect of the chemical nature of membrane surfaces on protein adsorption were investigated using¹⁴C-tagged albumin and several microporous membranes (polyvinilydene fluoride, PVDF; nylon; polypropylene, PP; and polycarbonate, PC). The membrane surfaces were modified by exposing them to low-temperature plasma of several different monomers (n-butane, oxygen, nitrogen alone or as mixtures) in a radiofrequency plasma reactor. Transients in the permeability of albumin solutions through the membranes and changes in flux of distilled water through the membranes before and after adsorption of albumin were used to investigate the role of protein adsorption on membrane fouling. The results show that the extent of adsorption of albumin on hydrophobic membranes was considerably more than that on hydrophilic membranes. The hydrophilic membranes were susceptible to electrostatic interactions and less prone to fouling. A pore-blocking model was successfully used to correlate the loss of water flux through pores of defined geometry     

A novel method for atomic absorption spectroscopy based on the analyte-Zeeman effect

A new type of atomic absorption spectrometry using the Zeeman effect of sample materials is proposed. A magnetic field was applied to the sample vapor in the direction perpendicular to the propagation of light emitted from an atomic spectral source. Absorption of radiation polarized perpendicular and parallel to the magnetic field was observed alternatively. The absorption difference was proportional to the true atomic absorption, and was not interfered with by any other molecular absorption and light scattering, i.e., background absorption. The background absorption could be monitored at exactly the same wavelength as an atomic absorption line. Suitable magnetic field strength was found for each line of the various elements.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.     

Proximity Effects in Acid and Base-Catalysed Ether Formation

When heated with sodium ethoxide in ethanol 7-methylidenebicyclo[3.3.1]nonan-3-endo-ol (endo- 1 ) is converted into 1-methyl-2-oxa-adamantane ( 3 ). This reaction involves nucleophilic addition of a hydroxy group to an unactivated olefinic bond. Formation of the cyclic ether 3 also takes place when endo- 1 is heated in aqueous ethanol. This electrophilic addition is strongly catalysed by weak acids and suppressed by weak bases. These unusual reactions proceed more slowly with 7-methylbicyclo[3.3.1]non-6-en-3-endo-ol (endo- 2 ) and can be ascribed to a proximity effect. This follows from the IR . and NMR . spectra of endo- 1 and endo- 2 which show strong intramolecular hydrogen (OH-π) bonding. The unsaturated endo- and exo-alcohols 1 and 2 , respectively, undergo only exo-complexation with silver ion.     

Novel phenoxyalkylamine derivatives. VII. Synthesis and pharmacological activities of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives.

To find a novel alpha-blocker with high alpha-blocking selectivity against dopamine D2-receptor affinity, we performed structural modification of the alkylene chains and the substituents on two benzene rings of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives. The modification of the alkylene chain between the amino moiety in the center of the molecule and the benzene ring (ring A) was found to be the most significant. 5-[2-[[2-(5-Fluoro-2-methoxyphenoxy)ethyl]amino]propyl]-2- methoxybenzenesulfonamide (II-4), which possesses 1-methylethyl as the alkylene chain, exhibited high alpha-blocking selectivity as well as potent alpha-blocking activity.