Synthesis and anti‐HIV‐1 evaluation of 1,5‐disubstituted pyrimidine‐2,4‐diones

1,5‐Disubstituted pyrimidine‐2,4‐diones were synthesized by fusion of 5‐bromouracil with an aniline derivative followed by coupling with benzyl halide whereas the opposite synthesis sequence failed. Also 4,6‐dichloro‐N,N,5‐trimethylpyrimidin‐2‐amine was treated with phenols. The products were tested for their activity against HIV‐1.     

Epoxyamide-based strategy for the synthesis of polypropionate-type frameworks

A new approach to the stereoselective synthesis of polypropionate-type frameworks is reported utilizing reactions of amide-stabilized sulfur ylides with chiral aldehydes. To establish a new strategy for macrolide fragment synthesis, the stereoselectivity of these reactions in the construction of epoxy amides was the most important aspect of this study. In this aspect, we found a strong influence of the protecting groups employed in the starting aldehydes upon the stereochemical outcome of their reactions with the sulfur ylide 1. Thus, numerous aldehydes showed remarkable stereofacial differentiation, providing a major diastereoisomer, in contrast to others that displayed a poor or no stereoselectivity. Despite the difficulties encountered for some cases with respect to their diastereomeric yields, we were able to prepare various stereotetrads and stereopentads, thus enhancing the synthetic value of this new methodology for the preparation of typical polypropionate frameworks found in many natural products, in particular the macrolide class of antibiotics.     

Absorption characteristics of masjid carpets

This work investigated the absorption characteristics of eight types of carpets that are especially designed and manufactured for masjids and two types of carpets pads. Measurements were carried out in the reverberation room according to ISO 354. Each type was tested three times: first when it was installed directly on the floor, second when it was installed above 5.7 mm of polyurethane foam, and last when it was installed above 10 mm of polyethylene foam. The results showed that the absorption coefficient is directly proportional to frequency and knot density. The results also demonstrated that adding pads of polyurethane or polyethylene foam increased the absorption, principally in the mid-frequency range. The effect of polyurethane foam on absorption was higher than that of polyethylene foam. Finally, the absorption coefficients of the examined carpets were found to be close to those of Muslim worshippers when they are in the position known as “standing in rows”.     

Officinalioside,a new lignan glucoside from Borago officinalis L.

A new lignan glucoside, officinalioside (1), was isolated from n-BuOH fraction of the aerial parts of Borago officinalis L., together with four known compounds: actinidioionoside (2), roseoside (3), crotalionoside C (4) and kaempferol 3-O-β-D-galactopyranoside (5). The structure of the new compound was established by means of spectroscopic and chemical analyses. Compounds 1 and 2 showed a moderate DPPH radical scavenging activity (IC₅₀: 52.6 ± 1.70 and 41.3 ± 0.25 μM, respectively) comparable with that of the standard trolox (16.6 ± 2.2 μM) without any significant cytotoxicity towards human cell line A549 (IC₅₀ > 100 μM).     

Stereoselective synthesis of macrolide-type antibiotics from epoxy amides. Synthesis of the polypropionate chain of streptovaricin u

The synthesis of the polypropionate chain of Streptovaricin U (1) is described utilizing a new approach for the stereoselective synthesis of the macrolide-type antibiotics via sulfur ylides.     

Molecular structures and dynamics of the stepwise activation mechanism of a matrix metalloproteinase zymogen: challenging the cysteine switch dogma

Activation of matrix metalloproteinase zymogen (pro-MMP) is a vital homeostatic process, yet its molecular basis remains unresolved. Using stopped-flow X-ray spectroscopy of the active site zinc ion, we determined the temporal sequence of pro-MMP-9 activation catalyzed by tissue kallikrein protease in milliseconds to several minutes. The identity of three intermediates seen by X-ray spectroscopy was corroborated by molecular dynamics simulations and quantum mechanics/molecular mechanics calculations. The cysteine-zinc interaction that maintains enzyme latency is disrupted via active-site proton transfers that mediate transient metal-protein coordination events and eventual binding of water. Unexpectedly, these events ensue as a direct result of complexation of pro-MMP-9 and kallikrein and occur before proteolysis and eventual dissociation of the pro-peptide from the catalytic site. Here we demonstrate the synergism among long-range protein conformational transitions, local structural rearrangements, and fine atomic events in the process of zymogen activation.     

Density dependent potentials: structure and thermodynamics

Local density dependent potentials constitute a family of many body potentials which have been recently introduced in mesoscopic modeling of simple and complex fluids. We construct a field theory for these potentials and calculate the structure factor of the fluid through a saddle point expansion. We propose also an integral equation for local density potentials which shows quantitative agreement both for the correlation functions and thermodynamic properties of such potentials, even close to binodals where the simpler saddle point approximation fails. Contrary to the limitations of global density dependent potentials, there is no ambiguity in the expression of thermodynamics quantities such as the pressure.     

Shear flow effect on phase behavior and morphology in polymer blends

The effect of simple shear flow on the phase behavior and morphology was investigated for both polystyrene/poly(vinyl methyl ether) (PS/PVME) and poly(methyl methacrylate)/poly(styrene‐co‐acrylonitrile) (PMMA /SAN‐29.5) blends, which have LCST (lower critical solution temperature)‐type phase diagram. The measurements were carried out using a special shear apparatus of two parallel glass plates type. The PS/PVME blends showed shear‐induced demixing and shear‐induced mixing at low and high shear rate values, respectively. In addition, the rotation speed and the sample thickness were found to have a pronounced effect on the phase behavior under shear flow. On the‐other hand, PMMA/SAN blend showed only shear‐induced mixing and the magnitudes of the elevation of the cloud points were found to be composition and molecular weight dependent. The morphology of the PMMA/SAN=75/25 blend indicated that shear‐induced mixing occurred at a critical shear rate value, below which the two phases were highly oriented and elongated in the flow direction.     

Enrichment of Zinc and Iron Micronutrients in Lentil (Lens culinaris Medik.) through Biofortification

Biofortification of pulse crops with Zn and Fe is a viable approach to combat their widespread deficiencies in humans. Lentil (Lens culinaris Medik.) is a widely consumed edible crop possessing a high level of Zn and Fe micronutrients. Thus, the present study was conducted to examine the influence of foliar application of Zn and Fe on productivity, concentration, uptake and the economics of lentil cultivation (LL 931). For this, different treatment combinations of ZnSO₄·7H₂O (0.5%) and FeSO₄·7H₂O (0.5%), along with the recommended dose of fertilizer (RDF), were applied to the lentil. The results of study reported that the combined foliar application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at pre-flowering (S1) and pod formation (S2) stages was most effective in enhancing grain and straw yield, Zn and Fe concentration, and uptake. However, the outcome of this treatment was statistically on par with the results obtained under the treatment ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. A single spray of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage enhanced the grain and straw yield up to 39.6% and 51.8%, respectively. Similarly, Zn and Fe concentrations showed enhancement in grain (10.9% and 20.4%, respectively) and straw (27.5% and 27.6% respectively) of the lentil. The increase in Zn and Fe uptake by grain was 54.8% and 68.0%, respectively, whereas uptake by straw was 93.6% and 93.7%, respectively. Also the benefit:cost was the highest (1.96) with application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. Conclusively, the combined use of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage can contribute significantly towards yield, Zn and Fe concentration, as well as uptake and the economic returns of lentil to remediate the Zn and Fe deficiency.     

Respiratory protection against airborne nanoparticles: a review

As a precautionary measure, it is often recommended that workers take steps to reduce their exposure to airborne nanoparticles through the use of respiratory protective devices. The purpose of this study was to provide a review and analysis of the research literature and current recommendations on respirators used for protection against nanoparticles. Key research findings were that studies with particles as small as 4 nm have shown that conventional single-fiber filtration theory can be used to describe the filtration performance of respirators and that the most penetrating particle size for respirators equipped with commonly used electrostatic filter media is in the range of 30–100 nm. Future research needs include human laboratory and workplace protection factor studies to measure the respirator total inward leakage of nanoparticles. Industrial hygienists and safety professionals should continue to use traditional respirator selection guidance for workers exposed to nanoparticles.