Influence of hybrid nano-structures on thermal performance of shear rate dependent viscosity fluid over a heated rotating cone with Hall and ion slip currents

Journal of Thermal Analysis and Calorimetry - The fluid of shear rate dependent viscosity has totally different rheology and exhibits dynamics which play a key role in heat transfer rate and...     

Role of compositional changes on thermal,magnetic,and mechanical properties of Fe-P-C-based amorphous alloys

This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.     

Experimental and theoretical approaches to the study of the reactivity and mechanism of the substitution of phenyl 1-(2,4-dinitronaphthyl) ether with anilines derivatives

Reactions of aniline derivatives in dimethyl sulfoxide with phenyl 1-(2,4-dinitronaphthyl) ether yield aryl 1-(2,4-dinitronaphthyl) amine, which results in substitution of the phenoxy groups at the naphthyl ipso carbon atom. Rate constants were measured spectrophotometrically, and reaction proton transfer was rate limiting. The values of the rate coefficients indicate a rate-limiting proton transfer mechanism with significant substituent effects. The calculated activation parameters were of regular variation with substituents in 4- and 3-position in the aniline nucleophile, and the reaction proceeded through a common mechanism. Hammett's reaction constant showed that the reaction rate constants depend on the electron density of the nitrogen atom of aniline derivative, whereas the coefficient value obtained from the Brönsted relation indicated that the reaction was significantly associative and quite zwitterion like. Computational studies of the substitution were carried out based on density functional theory, and theoretical to the experimental agreement was achieved.     

Mild Dehydration Using Trichlorotrifluoroacetone

The reaction of 1,1,1-trichloro-3,3,3-trifluoroacetone with 1[ddot] and 2[ddot] alcohols form the corresponding hemiketals which spontaneously eliminate water in presence of a catalytic amount of p-toluenesulfonic acid to produce the olefins in high yield.     

An updated review of nanofluids in various heat transfer devices

Journal of Thermal Analysis and Calorimetry - The field of nanofluids has received interesting attention since the concept of dispersing nanoscaled particles into a fluid was first introduced in...     

Investigation of solid-state reaction in Ag/Sn nanostructured thin films at room temperature

Diffusion intermixing processes in nanostructured Ag/Sn thin-film system at room temperature were investigated by means of secondary neutral mass Spectrometry depth profiling technique. As it was confirmed by X-ray diffraction too, the reaction started already in the as-deposited sample. Since the bulk diffusion was frozen at room temperature, the Ag₃Sn phase was formed along the grain boundaries (GBs), gradually consuming the interior of grains, and was grown perpendicular to the GBs. At the same time, formation and growth of a small compact reaction layer near the interface were observed and the shift of the bordering parallel interfaces was controlled by GB diffusion. From the kinetics of the diffusion process in the above two mechanisms, both the interface velocity in the diffusion-induced grain boundary motion regime as well as the coefficient of parabolic growth in the planar growth regime were determined.     

Musa sp. Leaves Extract Ameliorates the Hepato-Renal Toxicities Induced by Cadmium in Mice

Heavy metals intoxication causes several health problems that necessitate finding new protective and therapeutic approaches. This study aimed to evaluate the impact of Musa sp. leaves extract (MLE) on hepato-renal toxicities induced by cadmium (Cd) in male mice. The phytochemical screening, metal chelating activity (MCA), and the median lethal dose (LD₅₀) of MLE were determined. Fifty CD-1 male mice were used and intraperitoneally (i.p.) injected with MLE (1000 to 5000 mg/kg b.wt) for MLE LD₅₀ determination. Another 50 mice were used for evaluating the effect of MLE on Cd toxicity. Blood samples were collected for hematological, liver, and kidney functions assessments. Liver tissue homogenates were used for determination of oxidant/antioxidant parameters. Liver and kidney tissues were harvested for histopathological and molecular investigations. MLE showed potent in vitro antioxidant activities. The MCA and LD₅₀ of the MLE were 75 µg/mL and 3000 mg/kg b.wt, respectively. MLE showed beneficial therapeutic activity against hepato-renal toxicities in Cd-intoxicated mice, evidenced by improving the hematological, biochemical, histopathological, and molecular alterations.     

Flexural,impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil

The paraffin oil dispersion technique innovated in the recent years to synthesize bulk polymer nanocomposite materials has a uniform dispersion. This research work aims to study the effect of added carbon nanotubes (CNTs) on flexural, impact and rheology behaviors of polyoxymethylene (POM) reinforced by 0–0.03 wt% of CNT using paraffin oil dispersion technique. The wettability and lamellar thickness were measured and rheological performance investigated using a parallel plate rheometer. The flexural and impact mechanical properties were also evaluated. The fracture surfaces were then examined by microscopy. The results showed that the energy to break, flexural strength and modulus increased proportionally with the addition of the amount of CNT in the matrix. For the rheology behavior, the viscosity decreased at the low percentage of CNT and then increased with increase in the percentage weight ratio of CNT in the POM matrix. It was also noted that the water contact angle rose with the increase the CNT percentages. Copyright © 2016 John Wiley & Sons, Ltd.     

Side-by-side comparison of disposable microchips with commercial capillary cartridges for application in capillary isoelectric focusing with whole column imaging detection

Simple-structured, well-functioned disposable poly(dimethylsiloxane) (PDMS) microchips were developed for capillary isoelectric focusing with whole column imaging detection (CIEF-WCID). Side-by-side comparison of the developed microchips with well-established commercial capillary cartridges demonstrated that the disposable microchips have comparable performance as well as advantages such as absence of lens effect and possibility of high-aspect-ratio accompanied with a dramatic reduction in cost.