Formation of homogeneous nanocomposite films at ambient temperature via miniemulsion polymerization using graphene oxide as surfactant

A convenient and industrially scalable method for synthesis of homogeneous nanocomposite films comprising poly(styrene‐stat‐butyl acrylate) and nanodimensional graphene oxide (GO) or reduced GO (rGO) is presented. Importantly, the nanocomposite latex undergoes film formation at ambient temperature, thus alleviating any need for high temperature or high pressure methods such as compression molding. The method entails synthesis of an aqueous nanocomposite latex via miniemulsion copolymerization relying on nanodimensional GO sheets as sole surfactant, followed by ambient temperature film formation resulting in homogeneous film. For comparison, a similar latex obtained by physical mixing of a polymer latex with an aqueous GO dispersion results in severe phase separation, illustrating that the miniemulsion approach using GO as surfactant is key to obtaining homogeneous nanocomposite films. Finally, it is demonstrated that the GO sheets can be readily reduced to rGO in situ by heat treatment of the film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2289–2297     

Anthracene Substituted Co (II) and Cu (II) phthalocyanines; Preparations,Investigation of Catalytical and Electrochemical Behaviors

An approach to investigation of catalytical behaviors of Co (II) and Cu (II) phthalocyanines is reported that is based on changing any parameter to effect these behaviors. Towards this end, new anthracene substituted Co (II) and Cu (II) phthalocyanines were prepared and characterized spectroscopic methods. New cobalt (II) and copper (II) phthalocyanines were used as catalyst for oxidation of different phenolic compounds (such as 2,3‐dichlorophenol, 4‐methoxyphenol, 4‐nitrophenol, 2,3,6‐trimethylphenol) with different oxidants. Then, electrochemical characterization of cobalt (II) and copper (II) phthallocyanines were determined by using cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. Although copper (II) phthalocyanine showed similar Pc based electron transfer processes, cobalt (II) phthalocyanine showed metal and ligand based reduction reactions as expected.     

Papain Loaded Poly(ε-Caprolactone) Nanoparticles<Emphasis Type=Italic>: In-silico and</Emphasis><Emphasis Type=Italic>In-Vitro</Emphasis> Studies

Papain is a protease enzyme with therapeutic properties that are very valuable for medical applications. Poly(ε-caprolactone) (PCL) is an ideal polymeric carrier for controlled drug delivery systems due to its low biodegradability and its high biocompatibility. In this study, the three-dimensional structure and action mechanism of papain were investigated by in vitro and in silico experiments using molecular dynamics (MD) and molecular docking methods to elucidate biological functions. The results showed that the size of papain-loaded PCL nanoparticles (NPs) and the polydispersity index (PDI) of the NPs were 242.9 nm and 0.074, respectively. The encapsulation efficiency and loading efficiency were 80.4 and 27.2%, respectively. Human embryonic kidney cells (HEK-293) were used for determining the cytotoxicity of papain-loaded PCL and PCL nanoparticles. The in vitro cell culture showed that nanoparticles are not toxic at low concentrations, while toxicity slightly increases at high concentrations. In silico studies, which were carried out with MD simulations and ADME analysis showed that the strong hydrogen bonds between the ligand and the papain provide stability and indicate the regions in which the interactions occur.     

Surface modification of UV‐cured epoxy resins by click chemistry

A novel method for surface modification of UV‐cured epoxy network was described. Photoinitiated cationic copolymerization of a bisepoxide, namely 3,4‐epoxy cyclohexylmethyl 3,4‐epoxycyclohexanecarboxylate (EEC) with epibromohydrine (EBH) by using a cationic photoinitiator, [4‐(2‐methylpropyl)phenyl]4‐methylphenyl‐iodonium hexafluorophosphate, in propylene carbonate solution was studied. The real‐time Fourier transform infrared spectroscopic, gel content determination and thermal characterization studies revealed that both EEC and EBH monomers take part in the polymerization and epoxy network possessing bromomethyl functional groups was obtained. The bromine functions of the cured product formed on the glass surface were converted to azide functionalities with sodium azide. Independently prepared alkyne functional poly(ethylene glycol) (PEG) was subsequently anchored to azide‐modified epoxy surface by a “click” reaction. Surface modification of the network through incorporation of hydrophilic PEG chain was evidenced by contact angle measurements. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2862–2868, 2010     

MRI findings of primary small-cell carcinoma of kidney

We report the MRI findings of primary small-cell carcinoma of the kidney (PSCCK) in a 59-year-old female. This tumor appeared as a 16-cm mass that arose from the right kidney. This lesion had diminished signal on T1-weighted images and heterogeneous mixed signal on T2-weighted images. The tumor primarily involved the renal medulla with persistent thin renal cortex. Despite the tumors' large size, no substantial central necrosis was present. The predominant medullary location and the lack of central necrosis in this large tumor were features unusual for renal cell carcinoma and should raise the suspicion of another malignancy, the differential diagnosis of which should contain extrapulmonary small-cell carcinoma of the kidney.     

On the solvability of initial boundary value problems for nonlinear time-dependent Schrödinger equations

In this paper, we study the initial boundary value problems for a nonlinear time-dependent Schrödinger equation with Dirichlet and Neumann boundary conditions, respectively. We prove the existence and uniqueness of solutions of the initial boundary value problems by using Galerkin’s method.     

Fractionation and Bioaccessibility of Manganese,Copper, Zinc,Cadmium, and Lead in Commercial Vegetable and Rice Baby Foods Using Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) with Central Composite Design (CCD)

Abstract

Herein the bioaccessibility of Mn, Cu, Zn, Cd, and Pb, selected from essential and toxic elements, was determined in commercially sold vegetable purees intended for infant and toddler consumption. Chemical fractionation studies using water, acetone, diethyl ether, chloroform:methanol, and n-hexane were employed to predict the importance of the protein and lipid parts of a matrix to assess the bioaccessibility data. In addition, in-vitro gastrointestinal digestion was performed to determine the bioaccessibility of the elements using a five level, three factor central composite design (CCD) to maximize the elemental solubility. The total elemental concentrations in all of the fractions were determined by inductively coupled plasma – mass spectrometry (ICP-MS). Based on the consumption of one jar of vegetable/rice-based baby food, Zn was 1.3% of the recommended dietary allowance and Mn was 4.2% of the adequate intake level, while Cu was almost 100% of the adequate intake level. Additionally, Pb was always below the detection limit and Cd was sometimes under the detection limit for the percent bioaccessibility. However, in some samples, Cd was as high as 80% of the tolerable weekly intake level depending on the body weight.     

Diethoxy‐azobis(pyridinium) Salt as Photoinitiator for Cationic Polymerization: Towards Wavelength Tunability by Cis–Trans Isomerization

N,N′‐diethoxy‐4,4′‐azobis(pyridinium) hexafluorophosphate (DEAP) has been synthesized by alkylation of the corresponding N‐oxide and characterized. DEAP exhibits UV induced cis–trans isomerization with absorptions at around λ = 459 and 360 nm, respectively. The ability of the DEAP ion to act as a photoinitiator for the cationic polymerization of cyclohexene oxide and N‐vinylcarbazole is demonstrated. The initiation step involves the decay of the excited state of the trans form of the salt with homolytic bond rupture of the nitrogen–oxygen bond. Its potential use as a photoinitiator for free radical polymerization is also demonstrated using methyl methacrylate monomer as the example.

     

An extensive FPGA-based realization study about the Izhikevich neurons and their bio-inspired applications

This study is aimed at analysing damping and gyroscopic effects on the stability of parametrically excited continuous rotor systems, taking into account both external (non-rotating) and internal (rotating) damping distributions. As case-study giving rise to a set of coupled differential Mathieu–Hill equations with both damping and gyroscopic terms, a balanced shaft is considered, modelled as a spinning Timoshenko beam loaded by oscillating axial end thrust and twisting moment, with the possibility of carrying additional inertial elements like discs or flywheels. After discretization of the equations of motion into a set of coupled ordinary differential Mathieu–Hill equations, stability is studied via eigenproblem formulation, obtained by applying the harmonic balance method. The occurrence of simple and combination parametric resonances is analysed introducing the notion of characteristic circle on the complex plane and deriving analytical expressions for critical solutions, including combination parametric resonances, valid for a large class of rotors. A numerical algorithm is then developed for computing global stability thresholds in the presence of both damping and gyroscopic terms, also valid when closed-form expressions of critical solutions do not exist. The influence on stability of damping distributions and gyroscopic actions is then analysed with respect to frequency and amplitude of the external loads on stability charts in the form of Ince–Strutt diagrams.

     

Phthalocyanine-based fluorescent chemosensor for the sensing of Zn (II) in dimethyl sulfoxide-acetonitrile

A tetra-substituted phthalocyanine based on 4-[2-(4-nitrophenoxy)ethoxy]phthalonitrile carrying nitrophenyl group for the sensing of Zn²⁺ has been prepared and characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, and MS spectral data. The sensing of Zn²⁺ is based on the fluorescence quenching of Pc. Both absorbance and fluorescence spectra of ZnPc exhibit distinct changes in visible region in response to treatment with Zn²⁺ ion in dimethyl sulfoxide. The fluorescence spectrum of the ligand showed quenching in the intensity of the signal at 688?nm for Zn²⁺. The complex composition of ZnPc was found 1:1 by means of spectrophotometric and spectrofluorimetric titration data. The spectrofluorimetric method showed good sensitivity for Zn²⁺ with linear range and detection limit of 4.0?×?10^?6–4.4?×?10^?5 and 2.4×10^?7?M, respectively.