Cationic PLA nanoparticles for DNA delivery: comparison of three surface polycations for DNA binding, protection and transfection properties

Biodegradable cationic nanoparticles (cNP) made of poly(lactide) (PLA) have been shown to be promising carrier systems for in vivo DNA delivery and immunization. In previous work, we have described a versatile approach for the elaboration of cationic PLA cNP based on the use of pre-formed particles and subsequent adsorption of a model polycation, the poly(ethylenimine) (PEI). Here, we evaluated two more polycations, chitosan and poly(2-dimethyl-amino)ethyl methacrylate (pDMAEMA)) to determine the most suitable one for the development of PLA cNP as DNA carriers. Cationic PLA-PEI, PLA-chitosan and PLA-pDMAEMA nanoparticles were compared for interaction with plasmid DNA and, more importantly, with regards to the biological properties of bound DNA. pDMAEMA coating yielded the most positively charged nanoparticles with the highest DNA binding capacity (32 mg/g). Loaded with DNA, all three cNP were in the same size range ( approximately 500 nm) and had a negative zeta potential (-50 mV). PLA-chitosan was the only cNP that released DNA at pH 7; the two others required higher pH. Adsorption and release from cNP did not alter structural and functional integrity of plasmid DNA. Moreover, DNA coated onto cNP was partially protected from nuclease degradation, although this protection was less efficient for PLA-chitosan than others. The highest transfection efficiency in cell culture was obtained with PLA-pDMAEMA carriers. We have shown that at least three different cationic polymers (chitosan, PEI, pDMAEMA) can be used for the production of PLA-based particulate DNA carriers and most probably other cationic polymers can also be used in the same purpose. PLA-pDMAEMA cNP were the most promising system for DNA delivery in this in vitro study. Our future work will focus on the in vivo evaluation of these gene delivery systems.     

Solute-Solvent Interaction Effects on Protonation Equilibrium of Substituted N-Benzylidene-2-hydroxyanilines in Aqueous Ethanol: The Application of Factor Analysis to Solvatochromic Parameters and Protonation Equilibria

In this study, the stoichiometric protonation constants, logK_OH and logK_NH, of sixteen substituted N-benzylidene-2-hydroxyanilines have been determined potentiometrically in ethanol-water mixtures of varying composition (10–80% ethanol by volume) at 25.0±0.1°C. The values of the constants, logK, were submitted to factor analysis in order to obtain the number of factors which affect the variation of the whole data sets of protonation constants and, afterwards, to target factor analysis to identify these factors. The influence of solvatochromic parameters in the interactions between Schiff bases derivatives and the solvent studied was identified and quantified. Kamlet and Taft general equations allow calculation of the logK values of Schiff bases studied in any ethanol-water mixtures up to 80% (v/v) and thus provide the knowledge of the acid-base behaviour in these solvent media. Further, the quasi-lattice quasi-chemical (QLQC) theory of preferential solvation has been applied to quantify the preferential solvation by water of electrolytes in ethanol-water mixtures.     

Combined quantum mechanical/molecular mechanical study on the pentacoordinated ferric and ferrous cytochrome P450cam complexes

The pentacoordinated ferric and ferrous cytochrome P450(cam) complexes have been investigated by combined quantum mechanical/molecular mechanical (QM/MM) calculations in the presence of a protein/solvent environment and by QM calculations on the isolated QM regions with use of density functional theory. The B3LYP functional has been found more reliable than the BLYP and BHLYP functionals for estimating the relative state energies. The B3LYP/CHARMM calculations with an all-electron basis set for iron give high-spin ground states for the title complexes, in agreement with experiment. The comparison of the B3LYP/CHARMM results of the entire protein system with the B3LYP calculations on the naked QM regions shows that the amount of stabilization by the protein environment is largest for the intermediate-spin states, followed by the high-spin states of the complexes. The calculation of M?ssbauer parameters in the presence of the enzyme environment confirms the double occupation of the d(xz) orbital in the quintet spin state of the ferrous complex, consistent with the computed QM/MM energies in the enzyme environment, while the d(x)2(-)(y)2 orbital is doubly occupied in the gas-phase quintet state.     

Crystal Structure of 4-Amino-3-(thiophen-2-ylmethyl)-1H-1,2,4-triazole-5(4H)one Monohydrate

The molecular structure of the 4-amino-3-(thiophen-2-ylmethyl)-1H-1,2,4-triazole-5(4H)one monohydrate was determined by X-ray diffraction. The compound crystallizes in the monoclinic sp. gr. C2/c with Z = 4 in the unit cell. The title compound is not planar. The dihedral angle between the thiophene and 1,2,4-triazole rings is 73.4(5)°. In the crystal structure, the molecules are connected by intermolecular N–H···O, N–H···N, O–H···O, and C–H···N type hydrogen bonds. The N–H···N and C–H···N hydrogen bonds link the molecules into infinite chains along the c axis.     

Effect of Different Binders on the Combustion Properties of Lignite. Part II. Effect on kinetics

In this research kinetic analysis of the Tuncbilek lignite and its mixture with different binders (molasses, CMC, sulphide liquor, heavy crude oil, sodium silicate,cornstarch, lime, peridur, bentonite, cement and poly(vinyl-acetate)) were analysed by thermogravimetric (TG/DTG) methods. Two different kinetic models (Arrhenius and Coats–Redfern) were used to determine the activation energies of the samples studied. The concept of weighed mean activation energy was applied to determine the overall reactivity of the samples. It was observed that molasses, CMC, heavy crude oil, peridur, bentonite and poly(acetate) decreased the activation energy of the coal sample, whereas, all other binders increased the activation energy of the coal sample. This revised version was published online in July 2006 with corrections to the Cover Date.     

Comparison of near- and far-fault ground motion effect on the nonlinear response of dam–reservoir–foundation systems

In this paper, it is aimed to compare the near- and far-fault ground motion effects on the nonlinear dynamic response of dams including dam–reservoir–foundation interaction. Two different types of dams, which are concrete arch and concrete faced rockfill dams, are selected to investigate the near- and far-fault ground motion effects on the dam responses. The behavior of reservoir water is taken into account using Lagrangian approach. The Drucker–Prager material model is employed in nonlinear analyses. Near and far-fault strong ground motion records, which have approximately identical peak ground accelerations, of Loma Prieta (1989) earthquake are selected for the analyses. Displacements, maximum and minimum principal stresses are determined using the finite element method. The displacements and principal stresses obtained from the analyses of dams subjected to each fault effect are compared with each other. It is clearly seen that there is more seismic demand on displacements and stresses when the dam is subjected to near-fault ground motion.     

A molecular dynamics study on iridium

In this study, molecular dynamics simulations are performed by using a modified form of Morse potential function in the framework of the Embedded Atom Method (EAM). Temperature-and pressure-dependent behaviours of bulk modulus, second-order elastic constants (SOEC), and the linear-thermal expansion coefficient is calculated and compared with the available experimental data. The melting temperature is estimated from 3 different plots. The obtained results are in agreement with the available experimental findings for iridium.      

Photoluminescence of Turkish purple jade (turkiyenite)

The purple-colored unique gem material is only found in the Harmanc?k (Bursa) region of the western Anatolia (Turkey). Therefore, it is specially called “Turkish purple jade or turkiyenite” on the worldwide gem market. Even though its jadeite implication is the principal constituent, the material cannot be considered as a single jadeite mineral since other implications are quartz, orthoclase, epidote, chloritoid and phlogopite minerals.Even if the analytical methods are used to characterize and identify the Turkish purple jade samples in detail, the luminescence spectra, especially photoluminescence features regarding to composite mineral implications of the material are important because of the existence the numerous characteristic broad and intensive luminescence bands in the samples. We can state that the UV-irradiation luminescence centers as photoluminescence (PL) are due to the overall signals in the Turkish purple jade samples. Accordingly, the distinctive photoluminescence peaks at 743, 717, 698, 484, 465 and 442 nm in PL-2D (counter diagram and sections) and PL-3D (sequence spectra) ranging between 300 and 900 nm of wavelengths, and between 220 and 340 K of temperatures are observed.Finally, photoluminescence features of the heterogeneous-structured material cannot be simply attributed to any chemical impurities, since the jade mass has numerous heterogeneous mineral constituents instead of a single jadeite mineral. Six different mineral implications and chemical impurities in the material composition display complex and individual all kind of luminescence features. Therefore, photoluminescence as well as radioluminescence, cathodoluminescence and thermoluminescence spectra provide positive identification regarding to the provenance (geographic origin) of the original Turkish purple jade (turkiyenite).     

Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906