Synthesis of New Spirodifuranose Derivatives by Reduction of Stable Spiro-Endoperoxides

Synthesis of three new stable spirodifuranose derivatives (3, 5, and 7), which cannot be obtained easily using ordinary synthetic methods, has been achieved by reduction of 3-O-acetyl and 3-O-methyl derivatives of (4R)-1,2-O-alkylidene-5-eno-4,7-epidioxy-5,6,8-trideoxy-α-D-threo-1,4-furano-4,7-diulo-octoses (1, 4, and 6).     

Conversion of carbon dioxide to cyclic carbonates using diimine Ru(II) complexes as catalysts

Cationic diimine Ru(II) complexes were synthesized and tested as catalysts for the formation of cyclic organic carbonates from CO₂ and liquid epoxides (propylene oxide, epichlorohydrine, 1,2‐epoxybutane and styrene oxide) which served as both reactant and solvent. The reaction rates not only depended on the type of ligand, but also on reaction conditions such as temperature, pressure, base, the epoxide substrates and the use of an additional solvent. Reaction rates in terms of turnover frequencies up to 4050 mol_product mol_cat.^?1 h^?1 at 99% selectivity were achieved by optimizing the diimine ligand as well as the reaction temperature and CO₂ pressure. Consistent with CV measurements, the electron donating group on the p‐position of the aryl ring accelerated the reaction rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Standardized method comparison for ACS:180 plus and Immulite sensitive PSA (sPSA) measurement methods

The aim of this study was to compare two immunoassay measurement methods, the ACS:180 Plus (Chiron Diagnostics) kit and the Immulite sPSA (DPC) kit. Method comparison analysis was performed according to EP9-A; approved guideline of NCCLS 51. Serum samples having a wide range of total prostate-specific antigen (PSA) concentrations were evaluated in split-sample analysis. F-test, t-test analysis and regression statistics were performed. In Deming regression analysis the coefficients were as follows; the slope=0.967; y-intercept=-0.148, r=0.989. An acceptable bias was seen since the systematical error was calculated to have a value less than the total allowable error calculated from biological variations. Non-parametric evaluation of the area under ROC curves for ACS:180 Plus and Immulite sPSA were 0.997 and 0.987, respectively. Diagnostic accuracy was at the level of p= 0.000 and no statistical difference was found between the two assay methods.     

Radiotracer determination of dynamic parameters of a superphosphate granulator

An experiment on rabbits was carried out with the aim to check results obtained formerly with the help of the neutron activation analysis indicating that Na⁺ ions can be /by contrast to K⁺ ions/ only very slowly removed from the bone tissue by extraction with water. The data resulting from a radiotracer experiment with²²Na are in a good agreement with the above mentioned results.     

Copper(II) complexes with pyridine-2,6-dicarboxylic acid from the oxidation of copper(I) iodide

Via an oxidation reaction of Cu(I) iodide with pyridine-2,6-dicarboxylic acid (H₂L) in DMF three copper(II) complexes, [(CH₃)₂NH₂]₂[CuL₂] (1), K₂[CuL₂]?H₂L?H₂O (2) and [Cu(L)(H₂O)]_n (3), were synthesized and characterized. The structures of 1–3 were determined by single crystal X-ray diffraction studies. In-situ DMF decomposition produces dimethylamine base under solvothermal conditions and a proton transfer reaction takes place for the complex formation of 1. 3-D networks are stabilized in 1 and 2 via hydrogen bonds. Complex 3 is a 1-D coordination polymer with Cu-O semi-coordination bonds. Thermal decomposition of the complexes results in the corresponding metal oxides. Also, the electrochemical behavior of 1 was determined to be a metal-centered and diffusion-controlled, one-electron reduction process.     

Influence of Mn incorporation on the structural and optical properties of sol gel derived ZnO film

Undoped and manganese doped ZnO (ZnO:Mn) films were prepared by sol gel method using spin coating technique. The effect of Mn incorporation on the structural and optical properties of the ZnO film has been investigated. The crystalline structure and orientation of the films have been investigated by using their X-ray diffraction spectra. The films exhibit a polycrystalline structure. Mn incorporation led to substantial changes in the structural characteristics of the ZnO film. The scanning electron microscopy (SEM) images of the films showed that the surface morphology of the ZnO film was affected by the Mn incorporation. The transparency of the ZnO film decreased with the Mn incorporation. The optical band gap and Urbach energy values of the ZnO and ZnO:Mn films were found to be 3.22, 3.19 eV and 0.10, 0.23 eV, respectively. The optical constants of these films, such as refractive index, extinction coefficient and optical dielectric constants were determined using transmittance and reflectance spectra. The refractive index dispersion curve of the films obeys the single oscillator model with dispersion parameters. The oscillator energy, E _o , and dispersion energy, E _d, of the films were determined 5.30 and 16.26 eV for ZnO film and 5.80 and 12.14 eV for ZnO:Mn film, respectively.     

Sol–gel synthesis of IPTES and D10H consisting fluorinated silane system for hydrophobic applications

In this study, new fluorinated silane system was prepared by adding hydroxyl terminated Fluorolink D10H oligomer to 3-isocyanatopropyltrietoxysilane. The obtained silane system was independently composed with 3-Glycidyloxypropyltrimethoxysilane and 3-Glycidyloxy-propyltriethoxysilane. Then the prepared two different coating solutions were applied to glass surface by spin-coating method. The chemical bonding between groups in system was investigated by FTIR analysis. The elemental composition of coatings was determined by using EDX analysis. Their structure and surface properties were analyzed by scanning electron microscopy, atomic force microscopy, contact angle measurement and UV–vis spectrophotometer. The amounts of fluorine on the coatings prepared with IPTES-D10H-GLYEO and IPTES-D10H-GLYMO were 33 and 34 %wt, respectively. Transparent coatings with smooth surface and uniform thickness were obtained. The coatings had nanoscale roughness. The contact angles of coatings for water were range from 103° to 110°, and for n-hexadecane were range from 59° to 62°.     

Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Synthesis, spectroscopic and electrochemical characteristics of a novel Schiff-base from saccharin and tryptophan

In the present work, a novel Schiff-base was synthesized by the reaction of saccharin with tryptophan and characterized by elemental analysis as well as UV-Vis, FT-IR, ¹H NMR spectroscopic data. The voltammetric behavior of Schiff-base was also studied on the hanging mercury drop electrode (HMDE) by using Square-Wave Voltammetry (SWV) and Cyclic Voltammetry (CV) techniques. The voltammograms of the Schiff-base exhibited two irreversible reduction peaks in Britton-Robinson buffer (pH 7.0–10.0) for the potential range from 0.0 V to ?1.4 V. These peaks which appeared at more positive potentials than the reduction peaks of tryptophan and saccharin, may be assigned to the cathodic reductions of C-N⁺ and >C=N- moieties of Schiffbase.     

Numerical simulation of partially coherent broadband optical imaging using the finite-difference time-domain method

Rigorous numerical modeling of optical systems has attracted interest in diverse research areas ranging from biophotonics to photolithography. We report the full-vector electromagnetic numerical simulation of a broadband optical imaging system with partially coherent and unpolarized illumination. The scattering of light from the sample is calculated using the finite-difference time-domain (FDTD) numerical method. Geometrical optics principles are applied to the scattered light to obtain the intensity distribution at the image plane. Multilayered object spaces are also supported by our algorithm. For the first time, numerical FDTD calculations are directly compared to and shown to agree well with broadband experimental microscopy results.