X波段高功率微波选模定向耦合器

高功率、长脉冲是高功率微波技术发展的趋势,提高微波器件的功率容量成为一项重要的任务,使用过模器件可以有效提高微波源的功率容量,然而却会带来微波源中同时存在多种模式的问题。为了识别一个X波段长脉冲过模高功率微波源的输出主模TM01模式,设计了一种在线选模定向耦合器,进行了理论分析和模拟优化设计。当频率范围为9.2~9.6 GHz时,模拟结果显示该选模耦合器对TM01模的耦合度为-54 dB,在400 MHz带宽内定向性大于35 dB,对TM02模的抑制度大于15 dB,功率容量可达到3 GW以上。     

Processing of Fluorescence Lifetime Image Using Modified Phasor Approach: Homo-FRET from the Acceptor

As the hardware of FLIM technique becomes mature, the most important criterion for FLIM application is the correct interpretation of its data. In this research, first of all, a more orthogonal phasor approach, called as Modified Phasor Approach (MPA), is put forward. It is a way to calculate the lifetime of the complex fluorescent process, and a rule to measure how much the fluorescence process deviates from single exponential decay. Secondly, MPA is used to analysis the time-resolved fluorescence processes of the transfected CHO-K1 Cell lines expressing adenosine receptor A₁R tagged by CYP and YFP, measured in the channel of the acceptor. The image of the fluorescence lifetime and the multiplication of the fluorescence lifetime and deviation from single exponential decay reveal the details of the Homo-FRET. In one word, MPA provides the physical meaning in its whole modified phasor space, and broadens the way for the application of the fluorescence lifetime imaging.     

非线性发展方程的Riemann theta 函数等几种新解

为了构造非线性发展方程的复合型无穷序列精确解, 获得了第二种椭圆方程的Riemann theta 函数等几种新解.在此基础上,利用第二种椭圆方程与Riccati方程的Bäcklund变换和解的非线性叠加公式, 借助符号计算系统 Mathematica, 以mKdV方程为应用实例, 构造了该方程的复合型无穷序列新精确解.这里包括Riemann theta 函数、Jacobi椭圆函数、双曲函数、 三角函数和有理函数,通过几种形式构成的复合型无穷序列新精确解. 关键词： 第二种椭圆方程 Riccati方程 非线性发展方程 Riemann theta 函数无穷序列解     

Direct observation of surface‐enhanced Raman scattering in ZnO nanocrystals

We have been able to observe the surface‐enhanced Raman scattering (SERS) from 4‐mercaptopyridine (4‐Mpy) molecules adsorbed on ZnO nanocrystals, which display 10³ enhancement factors (EFs). An excitation wavelength‐dependent behavior is clearly observed. Another molecule BVPP is also observed to have surface‐enhanced Raman signals. The chemical enhancement is most likely responsible for the observed enhancement, since plasmon resonances are ruled out. The research is important not only for a better understanding of the SERS mechanism, but also for extension of the application of Raman spectroscopy to a variety of adsorption problems on a semiconductor surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

多孔硅拉曼光谱随激发功率变化的研究

用阳极氧化法新制备了多孔硅样品,以457．5nm固体激光器为激发光源,在不同激发功率下,获得了拉曼谱图和一些谱峰参量随激光功率的变化关系。解释了520cm^-1和300cm^-1附近拉曼峰随功率变化的一系列可逆的实验现象：随激光功率升高出现的红移和非对称性展宽,主要是由于样品局域平均粒径变小而受量子限域效应的影响导致的;样品局域平均粒径在表面上的二维减小与随激光功率升高而导致的局域温升并不违背基本的热力学定律;高功率时520cm^-1附近双峰的出现是由于多孔硅样品局域平均粒径达到一定阈值而导致的纵模和横模双声子模的分裂。     

探针尖带金属微粒的光子扫描隧道显微镜成像数值模拟

引入了色散介质的时域有限差分法散射场方程,并针对光子扫描隧道显微镜的带金属尖光纤扫描成像问题进行三维的数值模拟。在考虑了光纤和样品相互作用的情况下,采用等效入射波法设置入射波,探针扫描模式为等高扫描模式,从成像分辨力和灵敏度的角度,比较了不同入射角、不同的光纤一样品间距,不同金属类型,及不同金属尖大小的成像情况。数值模拟结果显示,带金属颗粒光纤探针尖的光子扫描隧道显微镜在成像分辨力和灵敏度上有显著的改进,而带不同类型金属颗粒情况下对分辨力影响不大,灵敏度是银最好。     

可聚合型溶致液晶单体3,4,5-三(11-十一烷氧丙烯酰氧基)苯甲酸钠的自组装及紫外光固化性能

以3,4,5-三羟基苯甲酸为原料,依次经过酯化、醚化、酰氯化和钠盐化四步反应合成一种可聚合型溶致液晶单体3,4,5-三(11-十一烷氧丙烯酰氧基)苯甲酸钠,并对其结构进行了傅里叶变换红外与1H核磁表征. 在室温下研究了该单体在水中的自组装行为,组装体结构通过偏光显微镜与X射线衍射仪进行表征. 研究表明,单体与水比例为80:20时可自组装为层状(La)相,92:8时组装为反六方(H_II)相,这与临界堆积参数的理论计算相吻合,表明单体浓度是影响组装体结构的重要因素. 在组装的基础上研究了含不同光引发剂的溶致液晶体系的双键转化率及固化后组装体结构的保留. 经实时红外表征及溶胶-凝胶法的验证发现在光强为30 mW/cm²的365 nm下曝光30 min,含引发剂Darocur2959的溶致液晶体系双键转化率可达78%. 聚合之后La相与H_II相的纳米结构都得到了保留.     

离子速度成像技术研究2-溴戊烷的光解离动力学

运用离子速度成像技术研究了2-溴戊烷分子在～234 nm处的光解离动力学. 通过分析光解产物Br(²P_3/2)(简称Br)和Br(²P_1/2) (简称Br*)的速度影像,分别得到其速度分布和角度分布. Br和Br*的速度分布可以用两个高斯分布拟合,分别对应于2-溴戊烷在～234 nm处两个独立的光解离反应通道. 高能的高斯分量对应于C-Br伸缩振动模式的直接解离,低能的高斯分量对应于弯曲振动和C-Br伸缩振动耦合所导致的解离. 确定出光解离产物Br的相对量子产率为0.892,结合Br和Br*碎片的各项异性参数和溴原子的相对量子产率,讨论了³Q₀、³Q₁和¹Q₁激发态分别对产物Br和Br*的贡献. 通过对比溴代戊烷4种同分异构体光解离过程的差异,讨论了分子烷基分支化对光解机理的影响.     

An improved least square channel estimation algorithm for coherent optical OFDM system

This paper presents an improved processing added to conventional least square (LS) channel estimation to modify its performance for coherent optical orthogonal frequency division multiplexing (CO-OFDM) system. By testing selected limitation factors of the existing algorithms, the influence of our improved algorithm to the performance of CO-OFDM system were studied and compared with other published algorithms. The simulation results of the study demonstrated that the proposed approaches achieved better channel estimation performance and are considered as a more appropriate alternative for CO-OFDM system with the tradeoff between complexity and performance.