含季鏻阳离子的[Mo6O19]2-多酸化合物的合成、结构及光催化性能研究

通过使用季鏻盐与钼酸铵在常温条件下合成了含季鏻阳离子的(n-PentylPh₃P)₂[Mo₆O₁₉]多酸化合物,并通过X-射线单晶衍射、红外光谱、紫外光谱、热重分析和电化学对其进行了表征。产物中的季鏻配体上的氢原子通过与多酸阴离子端基氧原子形成氢键而构筑了一维链状结构,并且季鏻配体上的苯环与相邻季鏻配体上的苯环通过π-π作用形成三维层状结构。此外,对该多酸化合物的光催化降解亚甲基蓝的性能进行了研究。     

饱和土体中压力隧洞衬砌-土相互作用解析研究

基于Biot理论，采用渗流一力学耦合模型研究分析了内水压力作用下饱和土体中压力隧洞衬砌一土的相互作用问题。假定衬砌和土体均为饱和多孔介质，且衬砌和土体完全接触。运用积分变换理论，在hplace变换域中得到了衬砌和土体中的应力、位移和孔隙水压力解答，并利用bplace数值逆变换得到时域中的解。文末的算例分析结果表明：(1)采用渗流一力学耦合模型能较好地反映隧洞衬砌与土体相互作用中应力和变形的随时间变化过程；(2)衬砌和土体的相对刚度对隧洞的计算结果有很大影响。     

一套预测冰面上汽车牵引力的模型

根据传热学中的热平衡原理及冰的摩擦经理论，建立了冰面汽车牵引力的预测模型。研究表明：所建立的理论模型比已有的模型更接近实际，从摩擦学角度系统分析了汽车工作条件和环境因素以及表面粗糙度等对牵引力的影响，提出了今后研究中有待解决的几个问题。     

Studies on the structure and catalytic performance of Cu-Zn-Al catalyst prepared by liquid-phase preparation technology under different heat treatment atmosphere

Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres. The catalysts were characterized using X-ray diffraction, X-ray photoelectron spectroscope, and N2 adsorption-desorption. Their application in the single-step synthesis of dimethyl ether from syngas was also investigated. The results indicate that the type of heat treatment atmosphere has an influence on the Cu species and the Cu⁰/Cu⁺ ratio on the catalyst surface. Moreover, the final Cu/Zn ratio on the catalyst surface is mainly dependent on the composition and reaction environment of the catalyst and little on the type of heat treatment atmosphere. The prepared catalysts can suppress sintering of active sites at high temperatures, and the type of heat treatment atmosphere mainly affects the capability of the catalyst for methanol synthesis. The catalysts perform best using N2 as the heat treatment atmosphere.     

Quantitative characterization of membrane formation process of alginate–chitosan microcapsules by GPC

The semi-permeable membrane of alginate–chitosan (AC) microcapsules has been proven important to control the microcapsule stability and selective substance diffusion rate. Therefore, a novel and operable methodology based on gel permeation chromatography (GPC) was established for quantitative characterization of the membrane formation process, so as to provide guidance on performance improvement of AC microcapsules in biomedical applications. Not only the molecular weight (M_w) and its distribution of chitosan can be obtained by GPC, but also the area integral of molecular weight peaks can be linearly correlated to chitosan concentration in certain range. The dynamic membrane formation process was then obtained by quantitatively analyzing reaction amount of chitosan with time, which showed that for chitosan molecules with wide M_w distribution, only parts of molecules bind with alginate to form microcapsule membrane. Moreover, the contribution of chitosan molecules participating in the membrane formation process was also different. These new findings, therefore, are helpful for adjusting and controlling the membrane formation process and properties of microcapsule membrane.     

Homoleptic dirhodium tetraoctanoate and its pyridine adduct: synthesis and crystal structures

Dirhodium tetraoctanoate (1), without any exogenous axial ligands, has been obtained in crystalline form by slow evaporation from ethanol. The molecules are linked by axially ligating each other to form infinite chains, which is similar to the only other two structurally characterized rhodium(II) carboxylates, Rh₂(O₂CCF₃)₄ and Rh₂(O₂CC₃H₇)₄, which also lack exogenous axial ligands. The infinite chains of 1 are cleaved by strong donor solvents such as pyridine to produce the corresponding pyridine adduct (2). Both the complexes were characterized by elemental analysis, MS, IR and NMR spectra.     

圆盘状a-Co(OH)2的控制合成及其电化学性能

采用AAO模板及后处理方法合成了圆盘状a-Co(OH)2并研究了其电化学电容性能.在该合成方法中,先采用阳极氧化铝模板结合交流电沉积的方法获得钴纳米线,而后将其在碱液中通过溶解氧氧化生成终端产物.用红外光谱(FT-IR),X射线衍射(XRD)和场发射扫描电子显微镜(FE-SEM)表征了产物的结构和形貌;用循环伏安、恒电流充放电测试方法对其电化学性能进行了测试.此外,对圆盘状Co(OH)2的形成机理进行了初步探讨.结果表明,用此方法合成的Co(OH)2具有圆盘状形貌,属a相态,且表现出较好的电容特性.     

Investigation of a catalyst ink dispersion using both ultra-small-angle X-ray scattering and cryogenic TEM

The dispersion of Nafion ionomer particles and Pt/C catalyst aggregates in liquid media was studied using both ultra-small-angle X-ray scattering (USAXS) and cryogenic TEM. A systematic approach was taken to study first the dispersion of each component (i.e., ionomer particles and Pt/C aggregates), then the combination of the components, and last the catalyst ink. Multiple-level curve fitting was used to extract the particle size, size distribution, and geometry of the Pt/C aggregates and the Nafion particles in liquid media from the scattering data. The results suggest that the particle size, size distribution, and geometry are not uniform throughout the systems but rather vary significantly. It was found that the interaction of each component (i.e., the Nafion ionomer particles and the Pt/C aggregates) occurs in the dispersion. Cryogenic TEM was used to observe the size and geometry of the particles in liquid directly and to validate the scattering results. The TEM results showed excellent agreement.     

Two New 3D Lanthanide Coordination Polymers with Benzenesulfonic and Adipic Acids: Synthesis,Structure and Luminescent Properties

Two new lanthanide complexes [Sm₂(ad)_2.5(BSA)(H₂O)₂]_n ( 1 ) and [Nd₂(ad)_2.5(BSA)(H₂O)₂]_n ( 2 ) (H₂ad = adipic acid, HBSA = benzenesulfonic acid) were synthesized hydrothermally from the reaction of the lanthanide ions (Ln³⁺) with flexible aliphatic dicarboxylate and the rigid benzene sulfonic acid and characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction. They crystallize monoclinic in space group P2₁/ c. Structural analyses revealed that the two complexes have intricate 3D net structures constructed by the bridging adipic ligand and benzenesulfonic acid. The thermogravimetric analysis of 1 and 2 , as well as photoluminescent properties of 1 are discussed in detail.     

Structure-function analysis of an enzymatic prenyl transfer reaction identifies a reaction chamber with modifiable specificity

Fungal indole prenyltransferases participate in a multitude of biosynthetic pathways. Their ability to prenylate diverse substrates has attracted interest for potential use in chemoenzymatic synthesis. The fungal indole prenyltransferase FtmPT1 catalyzes the prenylation of brevianamide F in the biosynthesis of fumitremorgin-type alkaloids, which show diverse pharmacological activities and are promising candidates for the development of antitumor agents. Here, we report crystal structures of unliganded Aspergillus fumigatus FtmPT1 as well as of a ternary complex of FtmPT1 bound to brevianamide F and an analogue of its isoprenoid substrate dimethylallyl diphosphate. FtmPT1 assumes a rare α/β-barrel fold, consisting of 10 circularly arranged β-strands surrounded by α-helices. Catalysis is performed in a hydrophobic reaction chamber at the center of the barrel. In combination with mutagenesis experiments, our analysis of the liganded and unliganded structures provides insight into the mechanism of catalysis and the determinants of regiospecificity. Sequence conservation of key features indicates that all fungal indole prenyltransferases possess similar active site architectures. However, while the dimethylallyl diphosphate binding site is strictly conserved in these enzymes, subtle changes in the reaction chamber likely allow for the accommodation of diverse aromatic substrates for prenylation. In support of this concept, we were able to redirect the regioselectivity of FtmPT1 by a single mutation of glycine 115 to threonine. This finding provides support for a potential use of fungal indole prenyltransferases as modifiable bioreactors that can be engineered to catalyze highly specific prenyl transfer reactions.