微波常压法合成水杨酸酯

在浓硫酸催化下，采用微波常压法由水杨酸分别与正丁醇、异丁醇、正戊醇和异戊醇反应合成相应的水杨酸酯。结果表明：当水杨酸：醇：Ｈ２ＳＯ４＝１：５．５：０．３（摩尔比）时，采用５６０Ｗ微波辐射２２ｍｉｎ，水杨酸酯的产率可达８８．７％￣９６．４％，反应速度至少是常规反应的１４倍。     

稀土铽配合物的有机发光二极管

有机小分子和有机高分子的发光二极管在可见光区内有非常高的量子效率，因而受到人们的高度重视．采用二胶（TPD），8羟基喹啉铝（Alq3）等有机小分子作为空穴和电子输运层所作的发光二极管[1]的量子效率可达10％，采用聚对苯乙炔（PPV）高分子聚合物作空穴输运层，有机小分子2     

液体和非晶态Ni64B36合金结构的从头算分子动力学模拟

运用从头算分子动力学模拟了液体以及猝冷后形成的非晶态Ni₆₄B₃₆合金体系, 得到了它们的对相关函数、结构因子、键对分析方面的结构信息, 与实验结果相当一致; 结果表明, 猝冷得到的合金性质与液体合金性质相似, 为非晶态结构. B原子多数以B—B双原子成键形式分散于Ni原子构成的骨架中. 电子态密度分析表明, Ni 3d电子最活泼, 因此在合金中Ni为活性位. 轨道电荷分析从电子结构角度揭示了在NiB 催化剂中B作为修饰剂的机理.     

A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

TCDD的密度泛函理论研究

用B3LYP/6-311G~(**)方法全优经计算22个四氯二苯并对二（左口右恶）英（ 简称TCDD）分子，得到几何构型、总能量、标准熵、标准焓和标准自由能。将2， 3，7，8－TCDD的计算构型与X射线衍射实验测定值进行了比较。计算结果表明，总 能量、标准焓和标准自由能与氯原子量换位置的相关性很高（r > 0.997）.1,3,6, 8-TCDD的总能量处自由能最低，即最稳定，以此参照，得到异构体的总能量的相对 稳定性顺序和自由能的相对稳定性顺序。1,3,7,9－TCDD的稳定性次之，1,3,7,8- TCDD居第三，将这二个顺序与焚烧炉产生的TCDD异构体和合成的异构体对的生成面 分比进行了比较，说明焚烧炉中产生的TCDD和合成的TCDD对的分布主要受热力学控 制。     

Theoretical study of the reaction of Sc with SCO in gas phase

In order to elucidate the mechanism of reaction M⁺ + SCO, both triplet and singlet potential energy surfaces (PESs) for the reaction of Sc⁺ + SCO have been theoretically investigated using the DFT (B3LYP/6-311+G*) level of theory. The geometries for reactants, intermediates, transition states and products were completely optimized. All the transition states were verified by the vibrational analysis and the intrinsic reaction coordinate calculations. The involving potential energy curve-crossing dramatically affects reaction mechanism, reaction rate has been discussed, and the crossing points (CPs) have been localized by the approach suggested by Yoshizawa et al. The present results show that the reaction mechanism are insertion–elimination mechanism both along the C–S and C–O bond activation branches, but the C–S bond activation is much more favorable in energy than the C–O bond activation. All theoretical results not only support the existing conclusions inferred from early experiment, but also complement the pathway and mechanism for this reaction.     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

Chiral Cu(II) complex catalyzed enantioselective addition of phenylacetylene to N-aryl arylimines

Chiral tridentate N-tosylated aminoimine ligands were used in the Cu(II)-catalyzed enantioselective addition of phenylacetylene to N-aryl arylimines, affording products up to 92% ee.     

衬钽管石墨炉中小量氢气的影响及稀土基质激光晶体中铕的测定

通过纯氩中加入小量氢气,研究了保护气体对衬鉏管石墨炉分析性能的影响,结果表明,采用5％H_2-Ar作保护气体,可以显著提离衬鉏管的成品率,明显延长衬鉏管的使用寿命,使衬钽管的测定重现性得到改善,而对测定灵敏度没有明显影响。干扰试验表明,本方法可直接用于稀土基质激光晶体中铕的测定,分析结果与计算值基本一致。     

AC calorimetric study of phase transitions in phosphatidylcholine-cholesterol systems

Using an ac calorimetric method, detailed behaviour of the heat capacity in dipalmitoyl-phosphatidylcholine-cholesterol system was studied in the cholesterol concentration less than 5 mol%. It was revealed that the heat capacity near the main transition was composed of at least four anomalies, i.e., multipeak took place in the heat capacity. This fact indicates that a simple theory explaining coexistence of two phases in two component systems does not work in the multipeak region. Then, relation between the multipeak heat capacity and the change of the ripple structure with the cholesterol concentration should be taken into account, when we consider thermodynamical behaviour of the systems.

---

Zusammenfassung Mittels AC-Kalorimetrie wurde bei Cholesterol-Konzentrationen von weniger als 5 mol% das Verhalten der Wärmekapazität im System Dipalmitoylphosphatidylcholin-Cholesterol untersucht. Es wurde gezeigt, daß sich die Wärmekapazität in der Nähe der Hauptumwandlung aus mindestens vier Anomalien zusammensetzt, d.h. bei der Wärmekapazität kann ein Multipeak beobachtet werden. Diese Tatsache zeigt, daß eine einfache Theorie, welche die Koexistenz zweier Phasen in einem Zweikomponenten-System erklärt, für die Multipeakregion nicht geeignet ist. Weiterhin sollte bei Überlegungen zum thermodynamischen Verhalten von Systemen eine Beziehung zwischen der Multipeak-Wärmekapazität bzw. der Welligkeitsstruktur und der Cholesterol-Konzentration berücksichtigt werden.