菌紫质薄膜光致折射率变化的理论计算和实验测量

基因改性细菌视紫红质BR-D96N由于M态寿命的延长而具有显著的光致变色特性.根据Kramers-Kronig变换关系,样品吸收光谱的变化会引起样品折射率的变化.本文首先从实验上测量了BR-D96N薄膜样品在光激发前后的吸收光谱,然后根据Kramers-Kronig变换关系,理论计算了对应此光致变色光谱变化的光致折射率变化光谱.实验上为了直接测量样品的光致折射率变化,采用Michelson干涉方法测量BR-D96N薄膜在不同探测波长下的光致折射率变化量,并与理论计算曲线进行了比较.     

Laser-induced damage of high reflectors for Ti:sapphire laser system

A broadband (～ 176 nm, R ＞ 98%, λ0 = 800 nm) and high laser-induced damage threshold (LIDT =2.4 J/cm2) TiO2/HfO2/SiO2 high reflector (HR) for Ti:sapphire chirped-pulse amplification (CPA) laser system is fabricated by the electron beam evaporation. The refractive index and extinction coefficient of TiO2 and HfO2 films are calculated from single-layer films' transmittance spectra. The properties of HR are mainly determined by the high refractive index material. The high refractive index leads to wide bandwidth. A low extinction coefficient indicates low absorption and high LIDT. The possible damage mechanism of HR is discussed.     

Asymmetric molecular harmonic assisted generation of the attosecond X-ray pulse

In this paper, we theoretically investigate the asymmetric molecular high-order harmonic emission and the attosecond X-ray pulse generation when the asymmetric molecular HeH²⁺ ion is exposed to an intense chirped pulse. It is found that the molecular harmonics are strongly dependent on the internuclear distance R as well as the chirp parameter, showing a smooth and intense harmonic plateau at R = 8.0 a.u. and β = 0.4. Further, by adding a subharmonic controlling pulse with the optimised conditions, a supercontinuum with a bandwidth of 602 eV can be obtained. Finally, by properly superposing the selected harmonics in the supercontinuum region, a series of isolated X-ray pulses with durations of sub-80 as are directly generated.     

Fabrication and surface enhanced Raman spectroscopy of single Au@SiO2 dimers linked by benzenedithiol

Metal nanoparticle dimers with controllable gap distance have attracted considerable attention because of their promising application in plasmonics. Generally, gaps with nanometer or subnanometer dimensions generate localized surface plasmon resonance (LSPR) coupling effect, thus contributing to a strong electromagnetic field for improving surface enhanced Raman scattering (SERS) effect. Here, we developed a facile approach to fabricate Au@SiO₂ dimers through the steric hindrance effect, in which the SiO₂ shell functioned as a block and a rigid dithiol molecule was employed as linker. The thickness of the SiO₂ shell played a critical role in improving the yield of dimers. The dimerization efficiency increased significantly as the shell thickness decreased to ~1 nm. When 1,4‐benzenedithiol was used as linker molecule, the yield of dimers was ~30%. Few dimers were obtained when mecaptobenzonic acid was used as linker. A thicker shell is associated with a low yield of dimer, whereas a thinner shell resulted in the formation of multimers and linear structures. The low number of linker molecules on the exposed area of monodisperse single nanoparticles and the lack of LSPR coupling effect (‘hot spots’) resulted in the disappearance of SERS signals of the linkers. The estimated SERS enhancement factor was about eight fold because of the strong coupling effect in the gap of the dimer with the distance of the dithiol molecular length. From the above results, SERS combined with SEM could be developed into powerful tools for monitoring the formation of dimers and positioning of single dimers. It may aid the control of assembly of Au nanoparticles and in probing key issues about SERS enhancements. Copyright © 2015 John Wiley & Sons, Ltd.     

High-power high-stability Q-switched green laser with intracavity frequency doubling of diode-pumped composite ceramic Nd:YAG laser

We successfully obtain high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd:YAG in a straight plano-concave cavity. The temperature distribution in composite ceramic Nd:YAG crystal is numerically analyzed and compared with that of conventional Nd:YAG crystal. By use of a composite ceramic Nd:YAG rod and a type-II high gray track resistance KTP (HGTR-KTP) crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd:YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.     

Investigation of ultrafast dynamics of CdTe quantum dots by femtosecond fluorescence up-conversion spectroscopy

The ultrafast carrier relaxation processes in CdTe quantum dots are investigated by femtosecond fluorescence upconversion spectroscopy.Photo-excited hole relaxing to the edge of the forbidden gap takes a maximal time of ～ 1.6 ps with exciting at 400 nm,depending on the state of the photo-excited hole.The shallow trapped states and deep trap states in the forbidden gap are confirmed for CdTe quantum dots.In addition,Auger relaxation of trapped carriers is observed to occur with a time constant of ～ 5 ps.A schematic model of photodynamics is established based on the results of the spectroscopy studies.Our work demonstrates that femtosecond fluorescence up-conversion spectroscopy is a suitable and effective tool in studying the transportation and conversion dynamics of photon energy in a nanosystem.     

A three-dimensional in vitro culture model for primary neonatal rat ventricular myocytes

To overcome bad prognosis of patients with heart failure and the lack of organ donors, cardiac tissue engineering has developed as a biomimetic approach to repair, replace, and regenerate the damaged cardiac tissue. During the past decade years, researchers are devoted to find different natural and/or synthetic materials that can build appropriate physical structures to contain and organize implanted cells. In this study, we present a new method for primary neonatal rat cardiomyocytes culture in vitro using alginate/collagen/chitosan hydrogel. To investigate the feasibility of this material as scaffold for cardiac myocytes, neonatal rat ventricular myocytes were isolated and encapsulated in alginate-based beads cross-linked with calcium ion. The growth of cells was evaluated by staining with α-Sarcomeric actin (α-SCA) and Troponin T type 2 (TNNT2), and the viability of cardiomyocytes was studied in vitro by assessing the expression levels of several cardiac ion channels, including CACNL1A1, Connexin 43 and SCN5A. The results showed a significant increase in cardiac myocytes number, and the expression levels of CACNL1A1, Connexin 43 (Cx43) were up-regulated significantly except SCN5A, as compared with two-dimensional cultures. Moreover, extracellular matrix produced by the seeded cells themselves was observed by staining with fibronectin. Taken together, these findings indicate that this alginate/collagen/chitosan hydrogel bead is suitable for supporting the growth and retaining the morphologic and electrophysiologic characteristics of primary cultured rat cardiac muscle cells.     

色噪声对光学双稳态的影响

采用统一色噪声近似构建了由乘法色噪声驱动的纯吸收型光学双稳态状态方程,并分析了色噪声对光学双稳态的影响,将结果与白噪声驱动的光学双稳态进行比较.结果表明:当乘法噪声与加法噪声处在正关联时,增加乘法色噪声的自关联时间r,光学双稳性的区域显著变宽,即磁滞回线面积变大;当乘法噪声与加法噪声处在负关联时,只有乘法噪声较小时,改变乘法色噪声的自关联时间r,光学双稳态才发生改变;当乘法噪声的自相关时间等于零时,本文模型退化为乘法白噪声驱动的光学双稳性状态方程.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

Microwave-assisted synthesis of Cu2ZnSnS4 nanocrystals as a novel anode material for lithium ion battery

One-dimensional ordered quantum-ring chains are fabricated on a quantum-dot superlattice template by molecular beam epitaxy. The quantum-dot superlattice template is prepared by stacking multiple quantum-dot layers and quantum-ring chains are formed by partially capping quantum dots. Partially capping InAs quantum dots with a thin layer of GaAs introduces a morphological change from quantum dots to quantum rings. The lateral ordering is introduced by engineering the strain field of a multi-layer InGaAs quantum-dot superlattice.