On a class of new and practical performance indexes for approximation of fold bifurcations of nonlinear power flow equations

Efficient measurement of the performance index (the distance of a loading parameter from the voltage collapse point) is one of the key problems in power system operations and planning and such an index indicates the severity of a power system with regard to voltage collapse. There exist many interesting methods and ideas to compute this index. However, some successful methods are not yet mathematically justified while other mathematically sound methods are often proposed directly based on the bifurcation theory and they require the initial stationary state to be too close to the unknown turning point to make the underlying methods practical.This paper first gives a survey of several popular methods for estimating the fold bifurcation point including the continuation methods, bifurcation methods and the test function methods (Seydel's direct solution methods, the tangent vector methods and the reduced Jacobian method) and discuss their relative advantages and problems. Test functions are usually based on scaling of the determinant of the Jacobian matrix and it is generally not clear how to determine the behaviour of such functions. As the underlying nonlinear equations are of a particular type, this allows us to do a new analysis of the determinants of the Jacobian and its submatrices in this paper. Following the analysis, we demonstrate how to construct a class of test functions with a predictable analytical behaviour so that a suitable index can be produced. Finally, examples of two test functions from this class are proposed. For several standard IEEE test systems, promising numerical results have been achieved.     

A Language for Teaching Discrete-event Simulation

Courses which teach discrete-event simulation are based on many different simulation languages. The requirements for a language to support teaching simulation are discussed. In particular, it is recommended that such languages separate into distinct modules those aspects of simulation which are taught as separate topics. Implementation of the separation is discussed. The SEESIM language, developed as a teaching aid, is described, and examples of its use are given. Straightforward use of SEESIM can be learned quickly, yet the language provides facilities for a staged introduction to advanced concepts of simulation.     

The operational performance of the Yale ESTU

The ESTU began operation in 1988 and achieved the design voltage of 20 MV in 1990. Since that time, improvements to the gas handling system, negative ion injector, accelerator terminal and control system have greatly increased its capability and reliability. Today, the ESTU can efficiently produce an extensive assortment of stable ions at wide-ranging energies in support of low-energy nuclear physics.     

Formation of hydrogenated amorphous carbon films from polymer pyrolysis

Free-standing and supported hydrogenated amorphous carbon films (a:C–H) were prepared upon pyrolysis of the polymer formed by ethanolamine (EA) and citric acid (CA), under an ambient atmosphere at 300 °C. EA facilitates the formation of the macroscopic films, while CA is essential for obtaining the a:C–H microstructure, which comprises a mixture of sp² and sp³ carbon. Received: 29 May 2001 / Accepted: 17 August 2001 / Published online: 20 December 2001     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

加肋圆柱壳在轴压作用下的屈曲和后屈曲

本文讨论完善和非完善的,纵向加肋和正交加肋圆柱壳在轴压作用下的屈曲和后屈曲性态.依据文[1]提供的圆柱薄壳屈曲的边界层理论及其分析方法,给出了加肋圆柱壳在轴压作用下的屈曲和后屈曲理论分析.本文同时讨论肋骨与壳板材料不同时对加肋圆柱壳屈曲和后屈曲性态的影响.     

静磁场伴随有静电场存在

阐述检测物体是否产生了电场的方法；通过实际检测证实立方体永磁体既产生了负静电场，也产生了正静电场，并测定了具体的场强．     

Theoretical Research on a Kind of Quantum Left-handed Metamaterial

Recently, research on left-handed materials （LHMs） has attracted considerable attentions. The LHMs are a kind of metameterial which have negative permittivity and negative permeability, which lead to negative refractive index in a frequency range. The LHMs that have been available so far are in the microwave range and are usually composed of classical particles, such as split-ring resonators. Some quantum phenomena such as spontaneous emission of atoms in the LHMs which are considered to be ＇classical background＇ have also been investigated. Many potential applications of LHMs have been proposed, such as superlenses which, in principle, can achieve arbitrary subwavelength resolution.     

Oxidation process of SiGe on SOI substrates

The oxidation of SiGe film epitaxial grown on top of SOI wafers has been studied. These SiGe/SOI samples were oxidized at 700, 900, 1100 °C. Germanium atoms were rejected from SiGe film to SOI layer. A new Si_1−xGe_x (x is minimal) layer formed at SiGe/Si interface. As the germanium atoms diffused, the new Si_1−xGe_x (x is minimal) layer moved to Si/SiO₂ interface. Propagation of threading dislocation in SiGe film to SOI substrate was hindered by the new SiGe/Si interface. Strain in SOI substrate transferred from SiGe film was released through dislocation nucleation and propagation inner. The relaxation of SiGe film could be described as: strain relaxed through strain equalization and transfer process between SiGe film and SOI substrates. Raman spectroscopy was used to characterize the strain of SiGe film. Microstructure of SiGe/SOI was observed by transmission electron microscope (TEM).     

谈物理实验教学中学生科学素质的培养

物理教学要实现由“应试教育”向素质教育的转轨，必须改单纯的“学科教育”为“科学教育”，即不仅要让学生掌握必要的物理知识，还要为学生的整体素质发展奠定必需的科学能力和科学品质的基础．笔者通过多年的教学实践和研究深刻地认识到，在物理教学中，加强实验教学是培养学生科学素质的重要途径和关键，也是物理学科实施素质教育的一个十分重要的方面．