电感耦合等离子体-原子发射光谱法测定矿石中钨、钼的不确定度评定

对用ICP-AES测定矿石中钨、钼元素的不确定度进行评估,根据结果计算公式绘制不确定度来源因果分析图,分析主要不确定度来源,包括:样品称量、标准溶液的配制,仪器测量过程重复性等引入的不确定度,评估了钨含量和钼含量的标准不确定度和扩展不确定度.     

Study of nanocrystalline Fe－Al－N soft magnetic thin films

Fe－Al－N films were fabricated by reactive sputtering using a radio-frequency magnetron sputtering system. The effects of Al and N content and annealing temperature on microstructure and magnetic properties were investigated. The Fe－Al－N films, which have good soft magnetic properties, consist of nanocrystalline α-Fe grains and a small amount of other phases in the boundaries of α-Fe grains. The average α-Fe grain size is about 10－15nm. A slight amount of Fe－N and Al－N compounds precipitate in the boundaries of α-Fe grains and suppress their growth. Annealing improves the soft magnetic properties slightly by releasing the residual stress and reducing defects.     

Gauge and Bäcklund transformations for the generalized sine-Gordon equation and its η-dependent modified equation

We study the generalized sine-Gordon hierarchy and its associated-dependent modified sine-Gordon hierarchy. Two Bäcklund transformations for these two families are constructed. One of them is a generalization of the Bäcklund transformations of Wadatiet al. and the other one is new. Gauge transformations of a relevant AKNS system are employed to reduce the integration of these equations via the Bäcklund transformations to quadratures. Three generations of explicit solutions of the sine-Gordon equation are presented.     

Using CEMS method to study Sb-doped SnO2 thin film as reducing gas sensing material

¹¹⁹Sn Mossbauer spectra for surface layers of thin film Sb doped SnO were obtained by CEMS method, the emissive internal conversion electrons were detected by multi-wire chamber. In practice the gas-sensing response of these films for H₂, CO depended on Sb concentration of doping (X%) and the annealling processes. It was found that the CEMS parameters of samples-(IS), (QS) and its distribution (HW), reach minima when x=1%, just in agreement with the gas-sensing responsive sensitivity reaching maximum. And then it is helpful for the study of the gas-sensitive mechanism.     

临界空穴扩张比准则的适用性

用新研制成的DE36平台钢制的轴对称和平面应变试样,进一步考察了临界空穴扩张比V_(Gi)准则[1]、[2]、[3]的适用性。实验和大应变有限元理论计算结果表明,V_(Gi)准则适用于所研究材料。文中指出,按V_(Gi)准则可根据试样或构件材料中V_G的发展变化来预起裂位置。     

119Sn and121Sb Mössbauer studies of BaSn1−x Sb x O3 Perovskite system

The relations between the electrical characteristics of BaSn_1?x Sb _x O₃ perovskite system and the contents of BaO, Sb₂O₃ and silicate sintering agent were studied by X-ray diffraction analysis and Mössbauer spectroscopy. It was found that the electrical conductivity is related to the substitution of Sb³⁺ for Sn⁴⁺, the content of sintering agent and the phase constitutents in samples. BaSnO₃, Ba₃Sn₂O₇, Ba₂SnO₄ and SnO₂ phases might appear in different fractions when the contents of BaO change from 0.5 mole to 3.5 mole. In low antimony percentage condition, pentavalent Sb³⁺ ions inserted in Sn⁴⁺ sites and formed the donor center. In high antimony percentage (x≥0.20) condition, the existence of an insulating phase (BaSb₂O₆) was confirmed.     

Preparation and Characterization of Polypyrrole/Ferrospinel Nanocomposite by W/O Microemulsion Pathway

A polypyrrole/ferrospinel(NiFe₂O₄) nanocomposite was prepared by the in situ chemical oxidizing of pyrrole in the presence of NiFe₂O₄ nanoparticles in water-in-oil (w/o) microemulsion. The structural, morphological, and magnetic properties of the as-prepared polypyrrole/NiFe₂O₄ nanocomposite were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and magnetic measurements. XRD and FTIR revealed the presence of NiFe₂O₄ in the nanocomposite. SEM and TEM images illustrated that polypyrrole was coated on the NiFe₂O₄ surface. The electromagnetic parameters, such as conductivity, saturation magnetization, and coercivity of NiFe₂O₄ nanoparticles varied after coating with polypyrrole.     

Nonisothermal Crystallization Behavior of Polypropylene Grafted Silane and Styrene Using γ-Ray Irradiation

Polypropylene grafted silane and styrene (named PP-g-Si/St in this article) was successfully prepared by radical graft polymerization initiated by γ-ray irradiation. The influence of total absorbed dose on the graft ratio of vinyltrimethoxysilane onto PP and the melt flow rate (MFR) of the PP-g-Si/St product were studied. The effect of graft ratios of vinyltrimethoxysilane on the melting point and nonisothermal crystallization kinetics of PP-g-Si/St was investigated by the method of differential scanning calorimetry (DSC). With increasing vinyltrimethoxysilane and styrene (used as viscosity modifier and free radical source) grafted on PP, the melting point of PP-g-Si/St became lower. Several different analysis methods, including those of Avrami, Jeziorny, and Mo and colleagues, were employed to describe the nonisothermal crystallization process of the grafted samples. The results indicate that the peak temperature of crystallization of PP-g-Si/St sample was lower than that of virgin PP. Crystallization kinetics revealed that the rates of nucleation and growth were affected differently by the graft ratio of vinyltrimethoxysilane onto PP. The activation energy was calculated on the basis of the method of Kissinger, and the values were 253.6 and 215.7 kJ/mol for virgin PP and PP-g-Si/St, respectively.     

Optical characteristics of subwavelength metallic grating coupled porous film surface plasmon resonance sensor with high sensitivity

A high performance sub-wavelength metallic grating coupled surface plasmon resonance (SWMGCSPR) sensor with metal and porous composite layer is proposed. Rigorous coupled-wave analysis (RCWA) is conducted to prove the design feasibility, characterize the sensor's performance and determine geometric parameters of the structure, which is also employed to compute the electromagnetic (EM) field distributions at the resonant wavelengths. Parameters of sensing platform are optimized to achieve the best performance of the SPR sensor. Obtained results reveal that the proposed structure can excite SPR with negative diffraction order of SWMG. Both wavelength and angular sensitivities are greatly enhanced because surface plasmon wave (SPW) exhibits a large penetration depth which will enlarge the distance of interactions between SP and analytes. The detection sensitivities and quality parameters are estimated to be 700 nm/RIU and 509°/RIU with full width at half maximum (FWHM) less than 2.5 nm using the same optimized structure.     

更正:质子束治疗中非均匀组织的等效水厚度修正研究[物理学报2013,62,068701]

《物理学报》2013年第62卷第6期第068701页《质子束治疗中非均匀组织的等效水厚度修正研究》一文中,因作者疏忽导致几处错误,特此更正,并诚挚地向读者致歉.期刊网上此文的电子版已做相应的更正.将3.1节中三个公式做如下更正:将(1)式:"WET=R介质/R水×b"改成:"WET=R水/R介质×b"将(2)式:"WET=R1/R水×d1+R2/R水×d2+···+Rn/R水×dn"改成:"WET=R水/R1×d1+R水/R2×d2+···+R水/Rn×dn"