Application of SPE Using Multi-Walled Carbon Nanotubes as Adsorbent and Rapid Resolution LC-MS-MS for the Simultaneous Determination of 11 Triazine Herbicides Residues in River Water

A method for the simultaneous determination of 11 triazine herbicides residues in river water has been developed. It involves solid-phase extraction (SPE) pretreatment step and rapid resolution liquid chromatography-tandem mass spectrometry (RRLC-MS-MS). In the SPE pretreatment step, the adsorptive performance of MWCNTs material as SPE adsorbent and the elution capability of five kinds of solvents were investigated; in the LC separation step, a rapid resolution high throughput LC column, was used and the gradient elution mode adopted. The linear correlation coefficients (r ²) of the method for 11 target analytes varied between 0.9930 and 0.9980, the mean recoveries were in the range of 73.0 and 98.0% with relative standard deviations (RSD) 2.6 ~ 4.2%, the method detection limits (MDL) were all below 0.1 ng L^?1. An expanded uncertainty of not more than 20% was estimated for each analyte at the spiked concentration of 4.0 μg L^?1. The proposed method was applied to the determination of the residue concentrations of 11 pollutants in Songhuajiang River water.     

Au nanoparticles as a novel coating for solid-phase microextraction

A novel solid-phase microextraction fiber based on a stainless steel wire coated with Au nanoparticles was prepared and has been applied, coupled with gas chromatography, to the extraction of aromatic hydrophobic organic chemical pollutants in rainwater and soil extract. The solid-phase microextraction fiber exhibited excellent extraction efficiency and selectivity. Effects of extraction time, extraction temperature, ionic strength, stirring rate and desorption conditions were investigated and optimized. Single fiber repeatability and fiber-to-fiber reproducibility were less than 7.90% and 26.40%, respectively. The calibration curves were linear in a wide range for all analytes. Correlation coefficients ranged from 0.9941 to 0.9993. The as-established SPME-GC method was used successfully to two real natural samples. Recovery of analytes spiked at 10 μg L(-1) and 100 μg L(-1) ranged from 78.4% to 119.9% and the relative standard deviations were less than 11.3%.     

铁和锰的化学状态对 LaFexMnyAl12-x-yO19 催化剂上 N2O 分解的影响

 以共沉淀法制备了 LaFexMnyAl12-x-yO19 六铝酸盐催化剂, 并用 X 射线衍射、扫描电镜、N2 吸附-脱附、紫外-可见漫反射光谱和穆斯堡尔谱对催化剂进行了表征, 考察了催化剂上高浓度 N2O 分解反应的性能. 结果表明, 在所考察的条件下, Mn 比 Fe 更有利于促进六铝酸盐晶相的形成. LaFexAl12-xO19 (x = 0.5, 1) 中 Fe 以 Fe3+位于六铝酸盐尖晶石结构中的四面体位和镜面层结构中的三角双锥位, 其中后者为 N2O 分解的主要活性中心. LaMnyAl12-yO19 (y = 0.5, 1) 中 Mn 优先以 Mn2+进入四面体位, 然后以 Mn3+进入尖晶石结构中的八面体位, 并成为 N2O 分解的主要活性中心.     

HPLC-MS-MS法测定水体中残留的氨基甲酸酯类农药

应用高效液相色谱-串联质谱(HPLC-MS-MS)联用技术,建立了检测水体中氨基甲酸酯类农药残留的方法。水样经氨基柱固相萃取,二氯甲烷洗脱,梯度流动相洗脱,电喷雾正离子(ESI+)模式采集、选择反应性监测模式(SRM)对定性、定量离子进行MS/MS测定。5种氨基甲酸酯类农药在5～200ng/L范围内线性关系良好,回收率为80%～92%,相对标准偏差均小于10%,方法检出限分别为:异丙威和仲丁威为1.4ng/L,克百威和甲萘威为1.5ng/L,恶虫威为1.6ng/L。该方法适用于水体中氨基甲酸酯类农药残留的检测。     

CdTe量子点荧光法测定阳离子表面活性剂

合成了巯基乙酸(TGA)保护的水溶性发光CdTe量子点,并考察了此探针在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)中的发光行为。根据观察到的发光猝灭效应,建立了一种简单的测定阳离子表面活性剂的方法。考察了CdTe量子点的浓度、体系酸度、反应时间及共存物质等对测定的影响。在最佳条件下,CdTe量子点发光强度与CTMAB的浓度分别在6×10-7~9.0×10-6mol/L和1.2×10-5~3.8×10-5mol/L范围内分段成线性关系。该方法用于水样的阳离子表面活性剂的测定,回收率为97%~102%。     

掺杂Sm_2O_3对Y-ZrO_2陶瓷烧结行为和性能的影响

一定量的Sm2O3粉末与3%Y2O3(摩尔分数)稳定的四方ZrO2粉体(Y-ZrO2)经球磨混合、造粒后,在钢模中压制成形,所得压坯在1450~1600℃下烧结后,得到不同Sm2O3掺杂量的Sm2O3掺杂Y-ZrO2(SY-ZrO2)陶瓷烧结体。对不同温度下烧结所得烧结体试样的相组成、密度、电导率、硬度以及抗弯强度等性能进行了测试分析。实验结果表明:将适量的Sm2O3掺入Y-ZrO2中,可以获得具有立方结构的SY-ZrO2陶瓷烧结体,且其密度、硬度和抗弯强度与Sm2O3的掺杂量有关;Sm2O3的加入提高了Y-ZrO2陶瓷的电导率,掺杂0.5%Sm2O3的SY-ZrO2陶瓷800℃时在空气中的离子电导率可达0.02 S.cm-1。本试验的初步实验结果显示,采用二元稀土氧化物(Sm2O3和Y2O3)复合掺杂ZrO2陶瓷材料,可以在保持其良好力学性能的同时,提高其电导率,拓展其应用领域。     

铈、钇在AZ91D镁合金中的存在形式及其作用

在AZ91D镁合金中添加稀土元素Ce和Y,研究了Ce,Y元素在铸态AZ91D镁合金中的存在形式以及对合金组织和性能的影响。结果表明,铸态AZ91D镁合金中加入的Ce,Y大部分形成Al4Ce和Al2Y化合物,少量剩余的Ce,Y部分取代Mg元素的位置,以代位固溶的形式固溶在α-Mg固溶体和β-Mg17Al12金属间化合物中;Ce,Y能够细化镁合金铸态组织的晶粒,使Mg17Al12相发生"断网"并减少其在组织中的相对比例;适量添加Ce,Y能够提高AZ91D镁合金铸态机械性能,其主要原因是Ce,Y的细晶作用、固溶强化作用、Al-RE相的第二相强化作用以及对Mg17Al12相强化作用的改善。     

Discrepancy of structural stability against temperature between metallic liquids and their glasses

The stability of the disordered structure in liquid or glass states could be characterized by the glass-forming ability (GFA) and thermal stability (TS), respectively. The two quantities are often, but not always, positively correlated. Here we show that the discrepancy between GFA and TS originates from the competition between entropy and enthalpy which fairly much relies on local structural characteristics. This inherent interaction and competition determines hierarchy of phase stability against temperature. As a result, the time susceptibility of GFA and temperature susceptibility of TS were derived from the time-temperature-transformation diagram, which are coincided with the above mentioned entropy-enthalpy competition perspective. Thus, the interrelationship among entropy, enthalpy and local cluster feature provides a potential resolution to design and optimize glass formers, and have implications for better understanding the nature of glass transition.     

Synthesis and Crystal Structure of Two Diflunisal Carboxamides

Graphical abstract  

The title compounds, 2′,4′-difluoro-4-[(4-methylbenzoyl)oxy]-N-[4-nitro-3-(trifluoromethyl)phenyl]-[1,1′-biphenyl]-3-carboxamide 2a and 2′,4′-difluoro-4-[(4-chlorobenzoyl)oxy]-N-[4-nitro-3-(trifluoromethyl) phenyl]-[1,1′-biphenyl]-3-carboxamide 2b, synthesized from diflunisal, a registered anti-inflammatory drug, via amidation of carboxlic acid and esterification of phenolic hydroxy group, were confirmed by single- crystal X-ray diffraction showing their packing are stabilized by intermolecular hydrogen bonds      

光谱法研究α-萘乙酸与核酸的相互作用

利用荧光光谱法研究了α-萘乙酸（NAA）与DNA之间的相互作用。结果表明,DNA能使NAA的荧光强度猝灭,根据荧光强度变化和荧光猝灭公式求得NAA与DNA的荧光猝灭常数。荧光寿命实验结果表明,荧光猝灭是由形成复合物的静态猝灭过程所致。黏度实验、离子强度实验等多种实验结果表明,NAA与DNA间的结合作用为部分插入式和沟槽式相结合。