Hyperpositive non-linear effects: enantiodivergence and modelling

The chiral ligand N-methylephedrine (NME) was found to catalyse the addition of dimethylzinc to benzaldehyde in an enantiodivergent way, with a monomeric and a homochiral dimeric complex both catalysing the reaction at a steady state and giving opposite product enantiomers. A change in the sign of the enantiomeric product was thus possible by simply varying the catalyst loading or the ligand ee, giving rise to an enantiodivergent non-linear effect. Simulations using a mathematical model confirmed the possibility of such behaviour and showed that this can lead to situations where a reaction gives racemic products, although the system is composed only of highly enantioselective individual catalysts. Furthermore, depending on the dimer''s degree of participation in the catalytic conversion, enantiodivergence may or may not be observed experimentally, which raises questions about the possibility of enantiodivergence in other monomer/dimer-catalysed systems. Simulations of the reaction kinetics showed that the observed kinetic constant k_obs is highly dependent on user-controlled parameters, such as the catalyst concentration and the ligand ee, and may thus vary in a distinct way from one experimental setup to another. This unusual dependency of k_obs allowed us to confirm that a previously observed U-shaped catalyst order vs. catalyst loading-plot is linked to the simultaneous catalytic activity of both monomeric and dimeric complexes.

An asymmetric reaction consisting of competing monomeric and dimeric catalysts may explain enantiodivergent non-linear effects.     

Computational insights about the dynamic behavior for the inclusion process of deprotonated and neutral aspirin in β-cyclodextrin

A high-efficiency microwave irradiation (MW) assisted protocol was proposed to synthesize series SPE-β-CD with specific degree of substitution (DS) in the sodium hydroxide solution. This protocol provided an eco-friendly way to modify the cyclodextrins with bulky sulfopropyl substituent on the purpose of avoiding organic solvents and high quantities of thermal energy. Temperature and energy distribution became more uniform under the new method accordingly. Therefore, not only the reaction time reduced significantly from over 20 h to a few hours, but also the DS increased up according to ¹H NMR spectroscopy, MS and elemental analysis results. Most importantly, the effects of reaction parameters on DS were compared both under MW method and conventional heating method, and were sufficiently studied to guarantee the aforementioned results could be better reproduced and DS of products could become more specific through the synthesis process. Products structures were characterized by FT-IR, DSC, and ¹³C NMR spectroscopy.     

Modulating the electronic properties of porphyrinoids: a voyage from the violet to the infrared regions of the electromagnetic spectrum

This paper examines the preparation of tailor-made azaporphyrins and analogues exhibiting their Q-bands in several particular and predetermined regions of the electromagnetic spectrum. The applications of phthalocyanines, the possibility of preparing novel related porphyrinoids with different colour properties and, consequently, new emerging applications, are discussed.     

Heteroleptic copper(I) complexes coupled with methano[60]fullerene: synthesis, electrochemistry, and photophysics

Heteroleptic copper(I) complexes CuPOP-F and CuFc-F have been prepared from a fullerene-substituted phenanthroline ligand and bis[2-(diphenylphosphino)phenyl] ether (POP) and 1,1'-bis(diphenylphosphino)ferrocene (dppFc), respectively. Electrochemical studies indicate that some ground-state electronic interaction between the fullerene subunit and the metal-complexed moiety are present in both CuPOP-F and CuFc-F. Their photophysical properties have been investigated by steady state and time-resolved UV-vis-NIR luminescence spectroscopy and nanosecond laser flash photolysis in a CH2Cl2 solution and compared to those of the corresponding model copper(I) complexes CuPOP and CuFc and of the fullerene model compound F. Selective excitation of the methanofullerene moiety in CuPOP-F results in regular deactivation of the lowest singlet and triplet states, indicating no intercomponent interactions. Conversely, excitation of the copper(I)-complexed unit (405 nm, 40% selectivity) shows that the strongly luminescent triplet metal-to-ligand charge-transfer ((3)MLCT) excited state located at 2.40 eV is quenched by the carbon sphere with a rate constant of 1.6 x 10(8) s(-1). Details on the mechanism of photodynamic processes in CuPOP-F via transient absorption are hampered by the rather unfavorable partition of light excitation between the two chromophores. By determination of the yield of formation of the lowest fullerene triplet level through sensitized singlet oxygen luminescence in the NIR region, it is shown that the final sink of photoinduced processes is always the fullerene triplet. This can be populated via a two-step charge-separation charge-recombination process and a less favored (3)MLCT --> (3)C60 triplet-triplet energy-transfer pathway. In CuFc-F, both of the photoexcited copper(I)-complexed and fullerene moieties are quenched by the presence of the ferrocene unit, most likely via ultrafast energy transfer.     

Self-assembly of fullerene-rich nanostructures with a stannoxane core

Fullerene derivatives bearing a carboxylic acid function undergo self-assembly with n-butylstannonic acid (nBuSn(O)OH) to produce fullerene-rich nanostructures with a stannoxane core in almost quantitative yields.     

Amphiphilic and mesomorphic fullerene-based dendrimers

Growing attention is currently devoted to large dendritic structures for applications in nanotechnology and materials science. In this respect, the incorporation of such compounds into thin ordered films appears to be an important issue. One of the most widely pursued approaches to structurally ordered dendrimer assemblies has been the preparation of Langmuir films at the air-water interface. We report on the case of a diblock globular fullerene-based dendrimer and show that peripheral substitution of the dendrimer with hydrophobic chains on one hemisphere and hydrophilic groups on the other provides the required hydrophobic/hydrophilic balance allowing the formation of stable Langmuir films. A second approach has been to consider the case of fullerene containing dendrimers terminated by mesogenic groups such as cyanobiphenyl subunits. Whatever the generation is, up to the fourth one, all these compounds exhibit a well-defined liquid crystalline smectic A phase. The molecular organisation within the smectic layers is found to be monolayered or bilayered depending on the generation. For the smallest dendrimers, the organisation is mainly governed by the size of the fullerene moiety, whereas for the higher ones, it is governed by the interactions between the terminal mesogenic groups. These two approaches appear particularly interesting for functional groups such as fullerenes, which are not well adapted to be organised in nanoscale architectures. The present study shows that fullerenes can indeed be introduced into different types of ordered structure when they have been chemically adequately modified.     

Functionalization and Rearrangement of Spirocyclohexadienyl Oxindoles: Experimental and Theoretical Investigations

The preparation and functionalization of spirocyclohexa‐2,5‐diene oxindoles is described. The spirocyclic core of the title compounds was installed by using a SmI₂‐mediated cyclization of aryl iodobenzamides. Epoxidation with CF₃CO₃H was then carried out and was shown to occur with a high level of diastereocontrol: the reagent approaches the diene moiety syn to the amide group, which is likely to be as a consequence of hydrogen bonding between the amide C?O bond and the peracid hydrogen. Carbanionic functionalization of the spirocyclohexa‐2,5‐diene oxindoles was then examined, leading to an unprecedented rearrangement of the strained spiro system into dearomatized phenanthridinones. Upon treatment with lithium diisopropylamide (LDA) at ?40 °C, the dienes rearranged to provide a phenanthridinone lithium enolate intermediate that was trapped by electrophiles including alkyl halides and aldehydes. Interestingly, alkylation and hydroxyalkylation occurred with different regiocontrol. DFT calculations were performed that rationalize the observed skeleton rearrangement, emphasizing the role of LDA/diisopropylamine in this rearrangement. The proposed mechanism thus relies on a thermodynamically driven diisopropylamine‐mediated proton transfer with the cleavage of the diene–amide C?O bond as the key step.     

Estimating the intensity of a random measure by histogram type estimators

The purpose of this paper is to estimate the intensity of some random measure N on a set ${\mathcal{X}}$ by a piecewise constant function on a finite partition of ${\mathcal{X}}$ . Given a (possibly large) family ${\mathcal{M}}$ of candidate partitions, we build a piecewise constant estimator (histogram) on each of them and then use the data to select one estimator in the family. Choosing the square of a Hellinger-type distance as our loss function, we show that each estimator built on a given partition satisfies an analogue of the classical squared bias plus variance risk bound. Moreover, the selection procedure leads to a final estimator satisfying some oracle-type inequality, with, as usual, a possible loss corresponding to the complexity of the family ${\mathcal{M}}$ . When this complexity is not too high, the selected estimator has a risk bounded, up to a universal constant, by the smallest risk bound obtained for the estimators in the family. For suitable choices of the family of partitions, we deduce uniform risk bounds over various classes of intensities. Our approach applies to the estimation of the intensity of an inhomogenous Poisson process, among other counting processes, or the estimation of the mean of a random vector with nonnegative components.