KINETICS AND MECHANISM OF THE REACTION BETWEEN OLIGOSILOXANES AND P-TRICHLORO-N-DICHLOROPHOSPHORYL MONOPHOSPHAZENE (Cl3P[dbnd]N-POCl2)

Abstract

³¹P NMR investigation has been made of the action of Cl₃P[dbnd]N-POCl₂(I) first on hexamethyldisiloxane (Me₃Si)₂O and then on oligosiloxanes Me₃Si-(OSiMe₂)_n-OSiMe₃ n = 2 and n=3. The reactions were carried out in bulk or in solution with molar ratios siloxane/(I) varying from I to 5. It was demonstrated that only the monosubstitution of a chlorine atom by the -(OSiMe₂)_n,-OSiMe₃ species n = 0, 2, 3 with elimination of trimethylchlorosilane occurred leading to the derivatives Cl₂OP-N[dbnd]PCl₂O(SiMe₂-O)_nSiMe₃ (II). For n=2, 3 the siloxane redistribution reactions were observed by ²⁹Si NMR analysis. A two steps mechanism is proposed. consisting in a nucleophilic substitution, involving a tricoordinate phosphazenium intermediate, followed by the formation of an active ionic centre probably an oxonium ion, arising from the solvatation by the siloxane of this phosphazeniurn ion and /or of (II) leading to the redistribution reactions. The influences of the solvent, of trimethylchlorosilane, of the temperature, and of the addition of a protonated species (MDH) were investigated.     

Evaluation of capillary isoelectric focusing in glycerol-water media with a view to hydrophobic protein applications

Capillary isoelectric focusing (CIEF) separations are usually performed with neutral coated fused-silica capillaries in aqueous anticonvective media. Glycerol, a very viscous solvent (eta = 945 mPa x s at 25 degrees C), known to help stabilize any kind of proteins and solubilize hydrophobic ones, was tested as an alternative to using commercial gels. Viscosity and electroosmotic mobility were measured as a function of gel or glycerol content in water, and a 30:70 v/v glycerol-water medium appeared as a good compromise for performing CIEF in a bare fused-silica capillary without imposing too high a viscosity. To demonstrate the feasibility of this new CIEF system, a standard mixture of nine model proteins was separated according to their pI with a good agreement between experimental and literature aqueous pIs. Moreover, better resolution was achieved with this system than with the conventional aqueous CIEF system, as two of the model proteins could not be separated in the latter system. Glycerol-water CIEF in bare silica capillary was next applied to the separation of horse radish peroxidase, a complex mixture of protein isoforms. The good concordance with the separation obtained by the conventional CIEF system indicated the adequacy of this new system. Finally, as anticipated from the results obtained for the separation of bacteriorhodopsin, a membrane protein, glycerol-water CIEF performed in bare silica capillary appears to be a promising alternative to conventional aqueous CIEF for hydrophobic protein characterization, under their native form.     

Organic cross-linked electropolymers as supported oxidation catalysts: poly((tetrakis(9,9'-spirobifluorenyl)porphyrin)manganese) films

Anodic oxidation of free base and manganese complexes of tetraspirobifluorenylporphyrins leads to the coating of the working electrode by insoluble electroactive poly(9,9'-spirobifluorene-free and manganese porphyrin) films which electrochemical behavior and physicochemical properties are described. After removal from the electrode, the manganese-complexed polymers were evaluated as catalysts for the oxidation of alkenes by iodobenzene diacetate or iodosylbenzene. The results show that the reactions proceeded very efficiently at room temperature with good yields. The electrosynthesized polymer catalysts can be recycled by simple filtration and reused even up to the eighth cycle without loss of activity and selectivity. These results represent an important improvement over those previously described for manganese-porphyrin-catalyzed epoxidation reactions.     

Synthesis and characterization of A4[Re6Q8L6]@SiO2 red-emitting silica nanoparticles based on Re6 metal atom clusters (A = Cs or K, Q = S or Se, and L = OH or CN)

Metal atom clusters constitute very promising candidates as luminophores for applications in biotechnology because they are nanosized entities offering robust luminescence in the near-infrared field (NIR). However, they cannot be used as prepared for biological applications because of potential toxic effects and quenching of the clusters' luminescence in aqueous media, and they therefore need to be dispersed in a biocompatible matrix. We describe herein the encapsulation of octahedral rhenium clusters, denoted as A(4)[Re(6)Q(8)L(6)] (A = Cs or K, Q = S or Se, and L = OH or CN), in silica nanoparticles by a water-in-oil microemulsion process, paying particular attention to the clusters' stability. The obtained A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles are 30 nm in size with good monodispersity and a perfectly spherical shape, as shown by scanning electron microscopy (SEM). The presence of cluster units inside the silica matrix was evidenced by scanning transmission electron microscopy in annular dark-field mode (ADF-STEM). From the point of view of their optical properties, the A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles show red and NIR emission under UV excitation, even when dispersed in water. The evolution of the structural and luminescence properties of clusters before and after encapsulation was followed by Raman and photoluminescence spectroscopy.     

Photoinduced electron transfer in Zn(II)porphyrin-bridge-Pt(II)acetylide complexes: variation in rate with anchoring group and position of the bridge

The synthesis and photophysical characterization of two sets of zinc porphyrin platinum acetylide complexes are reported. The two sets of molecules differ in the way the bridging phenyl-ethynyl unit is attached to the porphyrin ring. One set is attached via an ethynyl unit on the β position, while the other set is attached via a phenyl unit on the meso position of the porphyrin. These were compared with previously studied complexes where attachment was made via an ethynyl unit on the meso position. Femtosecond transient absorption measurements showed in all systems a rapid quenching of the porphyrin singlet state. Electron transfer is suggested as the quenching mechanism, followed by an even faster recombination to form both the porphyrin ground and triplet excited states. This is supported by the variation in quenching rate and porphyrin triplet yield with solvent polarity, and the observation of an intermediate state in the meso-phenyl linked systems. The different linking motifs between the dyads resulted in significant variations in electron transfer rates.     

A simplified [11C]phosgene synthesis

A new flow-through system for the production of [¹¹C]phosgene, a versatile labelling agent in radiochemistry for PET, is described. Cyclotron-produced [¹¹C]CH₄ is mixed with Cl₂ and converted into [¹¹C]CCl₄ by passing the mixture through an empty quartz tube at 510 °C. The outflow is directed through a Sb-filled guard that takes out Cl₂ and then, without intentional O₂ addition, through a second empty quartz tube at 750 °C, giving rise to [¹¹C]phosgene in 30–35% radiochemical yield.     

Protein nanopores with covalently attached molecular adapters

Molecular adapters are crucial for the stochastic sensing of organic analytes with alpha-hemolysin (alphaHL) protein nanopores when direct interactions between analytes and the pore cannot readily be arranged by conventional protein engineering. In our earlier studies, cyclodextrin adapters were lodged noncovalently within the lumen of the alphaHL pore. In the present work, we have realized the controlled covalent attachment of a beta-cyclodextrin (betaCD) adapter in the two possible molecular orientations inside alphaHL pores prepared by genetic engineering. There are two advantages to such a covalent system. First, the adapter cannot dissociate, which means there are no gaps during stochastic detection, a crucial advance for single-molecule exonuclease DNA sequencing where the continuous presence of a molecular adapter will be essential for reading individual nucleotides. Second, the ability to orient the adapter allows analytes to bind through only one of the two entrances to the betaCD cavity. We demonstrate that the covalently attached adapters can be used to alter the ion selectivity of the alphaHL pore, examine binding events at elevated temperatures, and detect analytes with prolonged dwell times.     

Alkaline‐Earth‐Catalysed Cross‐Dehydrocoupling of Amines and Hydrosilanes: Reactivity Trends,Scope and Mechanism

Alkaline‐earth (Ae=Ca, Sr, Ba) complexes are shown to catalyse the chemoselective cross‐dehydrocoupling (CDC) of amines and hydrosilanes. Key trends were delineated in the benchmark couplings of Ph₃SiH with pyrrolidine or tBuNH₂. Ae{E(SiMe₃)₂}₂ ? (THF)_x (E=N, CH; x=2–3) are more efficient than {N^N}Ae{E(SiMe₃)₂} ? (THF)_n (E=N, CH; n=1–2) complexes (where {N^N}^?={ArN(o‐C₆H₄)C(H)=NAr}^? with Ar=2,6‐iPr₂‐C₆H₃) bearing an iminoanilide ligand, and alkyl precatalysts are better than amido analogues. Turnover frequencies (TOFs) increase in the order Ca<Sr<Ba. Ba{CH(SiMe₃)₂}₂ ? (THF)₃ displays the best performance (TOF up to 3600 h^?1). The substrate scope (>30 products) includes diamines and di(hydrosilane)s. Kinetic analysis of the Ba‐promoted CDC of pyrrolidine and Ph₃SiH shows that 1) the kinetic law is rate=k[Ba]¹[amine]⁰[hydrosilane]¹, 2) electron‐withdrawing p‐substituents on the arylhydrosilane improve the reaction rate and 3) a maximal kinetic isotopic effect (k_SiH/k_SiD=4.7) is seen for Ph₃SiX (X=H, D). DFT calculations identified the prevailing mechanism; instead of an inaccessible σ‐bond‐breaking metathesis pathway, the CDC appears to follow a stepwise reaction path with N?Si bond‐forming nucleophilic attack of the catalytically competent Ba pyrrolide onto the incoming silane, followed by rate limiting hydrogen‐atom transfer to barium. The participation of a Ba silyl species is prevented energetically. The reactivity trend Ca<Sr<Ba results from greater accessibility of the metal centre and decreasing Ae?N_amide bond strength upon descending Group 2.     

Toward the Rational Design of Galactosylated Glycoclusters That Target Pseudomonas aeruginosa Lectin A (LecA): Influence of Linker Arms That Lead to Low‐Nanomolar Multivalent Ligands

Anti‐infectious strategies against pathogen infections can be achieved through antiadhesive strategies by using multivalent ligands of bacterial virulence factors. LecA and LecB are lectins of Pseudomonas aeruginosa implicated in biofilm formation. A series of 27 LecA‐targeting glycoclusters have been synthesized. Nine aromatic galactose aglycons were investigated with three different linker arms that connect the central mannopyranoside core. A low‐nanomolar (K_d=19 nm , microarray) ligand with a tyrosine‐based linker arm could be identified in a structure–activity relationship study. Molecular modeling of the glycoclusters bound to the lectin tetramer was also used to rationalize the binding properties observed.