Ferromagnetic versus antiferromagnetic exchange interactions in tetrathiafulvalene-based 3d/4f heterobimetallic complexes

(TTF-salphen)M compounds (TTF-salphen(2-)=4,5-bis(propylthio)tetrathiafulvalene-N,N'-phenylenebis(salicylideneimine) dianion; M=Cu(II) and Ni(II)) have been treated with Ln(hfac)(3)·2H(2)O precursors (hfac(-)=1,1,1,5,5,5-hexafluoroacetylacetonate anion; Ln=Gd(III), Tb(III), and Dy(III)) to elaborate unprecedented 3d/4f TTF-based heterobimetallic complexes of formula [(TTF-salphen)MLn(hfac)(3)]. All the structures of these compounds have been resolved by X-ray diffraction on single crystals. The structures of these complexes are formed by a TTF-salphen(2-) ligand coordinated to the 3d metal ions in the inert tetradentate N(2)O(2) site. The Ln(hfac)(3) fragment is coordinated to the (TTF-salphen)M one through the two phenolate bridges. Even if the complexes are similar in both Cu(II) and Ni(II) families, the crystal packing is different. In the first case, dimers of TTF-salphen(2-) donors constitute the organic network. In the other case, a reminiscent organic network is observed with S···S contacts. The photophysical properties of [(TTF-salphen)CuDy(hfac)(3)] (3) in chloroform solution highlight the redshift of the TTF→salphen charge transfer (400 cm(-1)) relative to the analogue excitations in (TTF-salphen)Cu, which attest to the stability of these structures in solution. Static magnetic measurements have allowed us to quantify the ferromagnetic interactions (J=+1.29 cm(-1)) between Cu(II) and Gd(III) in the [(TTF-salphen)CuGd(hfac)(3)] complex. Finally, an empirical method that consists of the comparisons of the magnetic properties of [(TTF-salphen)CuTb(hfac)(3)] with [(TTF-salphen)NiTb(hfac)(3)] and [(TTF-salphen)CuDy(hfac)(3)] with [(TTF-salphen)NiDy(hfac)(3)] has established that ferromagnetic interactions take place between Cu(II) and Tb(III) ions, whereas unusual antiferromagnetic interactions have been identified between Cu(II) and Dy(III) ions.     

Development and validation of an ELISA kit for the detection of ricin toxins from biological specimens and environmental samples

Ricin is a toxin that can be easily extracted from seeds of Ricinus communis plants. Ricin is considered to be a major bio-threat as it can be freely and easily acquired in large quantities. A deliberate release of such toxin in civilian populations would very likely overwhelm existing public health systems, resulting in public fear and social unrest. There is currently no commercially available or FDA-approved prophylaxis such as vaccines, or therapeutic antitoxins or antidotes, available for ricin intoxication. Patient treatment is typically supportive care based on symptoms, often designed to reinforce the body’s natural response. This paper describes the development and validation of a robust ELISA test kit, which can be used to screen for ricin in biological specimens such as whole blood and faeces. Faecal specimens are shown in this study to have better diagnostic sensitivity and a wider diagnostic window compared to whole blood. From these results, it is concluded that faeces is the most suitable clinical specimen for diagnosis of ricin poisoning via the oral route. The ELISA test kit can also detect ricin in environmental samples. An advantage of this ELISA kit over other commercial off-the-shelf (COTS) detection kits currently on the market that are developed to screen environmental samples only is its ability to diagnose ricin poisoning from clinical specimens as well as detect ricin from environmental samples.     

An experimental design based strategy to optimize a capillary electrophoresis method for the separation of 19 polycyclic aromatic hydrocarbons

Because of their high toxicity, international regulatory institutions recommend monitoring specific polycyclic aromatic hydrocarbons (PAHs) in environmental and food samples. A fast, selective and sensitive method is therefore required for their quantitation in such complex samples. This article deals with the optimization, based on an experimental design strategy, of a cyclodextrin (CD) modified capillary zone electrophoresis separation method for the simultaneous separation of 19 PAHs listed as priority pollutants. First, using a central composite design, the normalized peak-start and peak-end times were modelled as functions of the factors that most affect PAH electrophoretic behavior: the concentrations of the anionic sulfobutylether-β-CD and neutral methyl-β-CD, and the percentage of MeOH in the background electrolyte. Then, to circumvent computational difficulties resulting from the changes in migration order likely to occur while varying experimental conditions, an original approach based on the systematic evaluation of the time intervals between all the possible pairs of peaks was used. Finally, a desirability analysis based on the smallest time interval between two consecutive peaks and on the overall analysis time, allowed us to achieve, for the first time in CE, full resolution of all 19 PAHs in less than 18 min. Using this optimized capillary electrophoresis method, a vegetable oil was successfully analyzed, proving its suitability for real complex sample analysis.     

Activation of Open‐Cage Fullerenes with Ruthenium Carbonyl Clusters

Reactions of the open‐cage fullerene C₆₃NO₂(Py)(Ph)₂ ( 1 ) with [Ru₃(CO)₁₂] produce [Ru₃(CO)₈(μ,η⁵‐C₆₃NO₂(Py)(Ph)₂)] ( 2 ), [Ru₂H(CO)₃(μ,η⁷‐C₆₃N(Py)(Ph)(C₆H₄))] ( 3 ), and [Ru(CO)(Py)₂₍η³‐C₆₃NO₂(Py)(Ph)₂)] ( 4 ), in which the orifice sizes are modified from 12 to 8, 11, and 15‐membered ring, through ruthenium‐mediated C?O and C?C bond activation and formation.     

Spin‐State Ordering on One Sub‐lattice of a Mononuclear Iron(III) Spin Crossover Complex Exhibiting LIESST and TIESST

The two‐step spin crossover in mononuclear iron(III) complex [Fe(salpm)₂]ClO₄ ? 0.5 EtOH ( 1 ) is shown to be accompanied by a structural phase transition as concluded from ⁵⁷Fe Mössbauer spectroscopy and single crystal X‐ray diffraction, with spin‐state ordering on just one of two sub‐lattices in the intermediate magnetic and structural phase. The complex also exhibits thermal‐ and light‐induced spin‐state trapping (TIESST and LIESST), and relaxation from the LIESST and TIESST excited states occurs via the broken symmetry intermediate phase. Two relaxation events are evident in both experiments, that is, two T(LIESST) and two T(TIESST) values are recorded. The change in symmetry which accompanies the TIESST effect was followed in real time using single crystal diffraction. After flash freezing at 15 K the crystal was warmed to 40 K at which temperature superstructure reflections were observed to appear and disappear within a 10 000 s time range. In the frame of the international year of crystallography, these results illustrate how X‐ray diffraction makes it possible to understand complex ordering phenomena.     

An Isolated Nitridyl Radical‐Bridged {Rh(N.)Rh} Complex

Photochemical activation of [(PNNH)Rh(N₃)] (PNNH=6‐di‐(tert‐butyl)phosphinomethyl‐2,2′‐bipyridine) complex 2 produced the paramagnetic (S=1/2), [(PNN)Rh?N^.‐Rh(PNN)] complex 3 (PNN^?=methylene‐deprotonated PNNH), which could be crystallographically characterized. Spectroscopic investigation of 3 indicates a predominant nitridyl radical (^.N^2?) character, which was confirmed computationally. Complex 3 reacts selectively with CO, producing two equivalents of [(PNN)Rh^I(CO)] complex 4 , presumably by nitridyl radical N,N‐coupling.     

Energetic 2,2‐Dimethyltriazanium Salts: A New Family of Nitrogen‐Rich Hydrazine Derivatives

Amination of 1,1‐dimethylhydrazine with NH₂Cl or hydroxylamine‐O‐sulfonic acid yields 2,2‐dimethyltriazanium (DMTZ) chloride ( 3 ) and sulphate ( 4 ), respectively. The DMTZ cation was paired with the nitrogen‐rich anions 5‐aminotetrazolate ( 5 ), 5‐nitrotetrazolate ( 6 ), 5,5′‐azobistetrazolate ( 7 ), and azide ( 8 ), yielding a new family of energetic salts. The synthesis was carried out by metathesis reactions of salts 3 or 4 and a suitable silver or barium salt. To minimize the risks involved when using heavy metal salts, we used electrodialysis for the synthesis of azide 8 , which avoids the use of highly sensitive species. The DMTZ derivatives were characterized by IR and multinuclear NMR spectroscopy, elemental analysis, and X‐ray diffraction. Thermal stabilities were measured using DSC analysis and their sensitivities towards classical stimuli were determined using standard tests. Lastly, the relationship between hydrogen bonding in the solid state and sensitivity is discussed.     

Beyond Stereoselectivity,Switchable Catalysis: Some of the Last Frontier Challenges in Ring‐Opening Polymerization of Cyclic Esters

Metal‐based catalysts and initiators have played a pivotal role in the ring‐opening polymerization (ROP) of cyclic esters, thanks to their high activity and remarkable ability to control precisely the architectures of the resulting polyesters in terms of molar mass, dispersity, microstructure, or tacticity. Today, after two decades of extensive research, the field is slowly reaching maturity. However, several challenges remain, while original concepts have emerged around new types or new applications of catalysis. This Review is not intended to comprehensively cover all of these aspects. Rather, it provides a personal overview of the very recent progress achieved in some selected, important aspects of ROP catalysis—stereocontrol and switchable catalysis. Hence, the first part addresses the development of new metal‐based catalysts for the isoselective ROP of racemic lactide towards stereoblock copolymers, and the use of syndioselective ROP metal catalysts to control the monomer sequence in copolymers. A second part covers the development of ROP catalysts—primarily metal‐based catalysts, but also organocatalysts—that can be externally regulated by the use of chemical or photo stimuli to switch them between two states with different catalytic abilities. Current challenges and opportunities are highlighted.     

Phosphinoborane and Sulfidoborohydride as Chelating Ligands in Polyhydride Ruthenium Complexes: Agostic σ‐Borane versus Dihydroborate Coordination

A question of coordination mode : Two new borane compounds are prepared. They act as bifunctional ligands as illustrated by their reaction with ruthenium polyhydrides which leads to the formation of two complexes (see scheme) displaying either a δ‐agostic interaction of a η²‐B? H bond involving a trivalent boron atom or a dihydroborate ligation.

     

A p‐Type NiO‐Based Dye‐Sensitized Solar Cell with an Open‐Circuit Voltage of 0.35 V

In tandem : Employing a molecular dyad and a cobalt‐based electrolyte gives a threefold‐increase in open‐circuit voltage (V_OC) for a p‐type NiO device (V_OC=0.35 V), and a fourfold better energy conversion efficiency. Incorporating these improvements in a TiO₂/NiO tandem dye‐sensitized solar cell (TDSC), results in a TDSC with a V_OC=0.91 V (see figure; CB=conductance band, VB= valence band).