Preparation and Mechanical Properties of Fe3Al Nanostructured Intermetallics

Nanostructured Fe₃Al intermetallic compounds were produced by using hydrogen arc plasma method. The transmission electron microscopy experiments showed that the average particle size of the as-synthesized was about 40-nm. The change in hardness of Fe₃Al nanostructured intermetallic compounds with annealing temperatures was observed and evaluated.     

Atomic force microscopy investigation of growth process of organic TCNQ aggregates on SiO2 and mica substrates

<正>Deposition patterns of tetracyanoquinodimethane(TCNQ) molecules on different surfaces are investigated by atomic force microscopy.A homemade physical vapour deposition system allows the better control of molecule deposition. Taking advantage of this system,we investigate TCNQ thin film growth on both SiO_2 and mica surfaces.It is found that dense island patterns form at a high deposition rate,and a unique seahorse-like pattern forms at a low deposition rate.Growth patterns on different substrates suggest that the fractal pattern formation is dominated by molecule-molecule interaction.Finally,a phenomenal "two-branch" model is proposed to simulate the growth process of the seahorse pattern.     

Cs 39D态Rydberg原子Stark光谱的实验研究

本文从理论和实验上对Cs39D态Rydberg原子在弱电场作用下的Stark效应做了详细研究. 理论上利用数值方法计算了Cs原子39D态的Stark结构;实验上,采用两步激发超冷基态原子获得超冷Rydberg原子,通过场电离的方法获得了39D态的Stark光谱,测量获得α^5/2₂,α^5/2₀,α^3/2₂和α^3/2₀相应的极化率分别为：62(7),－146(13), 73(6) 和－106(20) MHz·V^-2cm²,实验结果与理论相符合.     

Integrated modeling of insect flight: From morphology,kinematics to aerodynamics

An integrated and rigorous model for the simulation of insect flapping flight is addressed. The method is very versatile, easily integrating the modeling of realistic wing–body morphology, realistic flapping-wing and body kinematics, and unsteady aerodynamics in insect flight. A morphological model is built based on an effective differential geometric method for reconstructing geometry of and a specific grid generator for the wings and body; and a kinematic model is constructed capable to mimic the realistic wing–body kinematics of flapping flight. A fortified FVM-based NS solver for dynamically moving multi-blocked, overset-grid systems is developed and verified to be self-consistent by a variety of benchmark tests; and evaluation of flapping energetics is established on inertial and aerodynamic forces, torques and powers. Validation of this integrated insect dynamic flight simulator is achieved by comparisons of aerodynamic force-production with measurements in terms of the time-varying and mean lift and drag forces. Results for three typical insect hovering flights (hawkmoth, honeybee and fruitfly) over a wide rang of Reynolds numbers from O(10²) to O(10⁴) demonstrate its feasibility in accurately modeling and quantitatively evaluating the unsteady aerodynamic mechanisms in insect flapping flight.     

基于经验模态分解和小波阈值的冲击信号去噪

冲击信号是非线性的并且容易受到噪声污染。为研究冲击信号去噪的问题,本文针对经验模态分解(Empirical Mode Decomposition,EMD)去噪和小波阈值去噪方法存在的不足,提出了基于EMD的小波阈值去噪方法。单纯的EMD去噪方法会在去除高频噪声的同时压制高频的有效信息。本文将EMD与小波阈值去噪相结合,利用连续均方误差准则确定含噪较多的高频固有模态函数(Intrinsic Mode Function, IMF),对高频IMF分量进行小波阈值去噪,以分离并保留这些分量中的有效信息,同时保持低频IMF分量不变。对模拟数据和实际冲击信号进行去噪处理,结果表明,基于EMD的小波阈值去噪方法的去噪效果优于单纯的EMD去噪方法和小波阈值去噪方法。     

Three-dimensional photonic bandgap crystals of titania hollow spheres at visible wavelengths

A non-close-packed three-dimensional photonic crystal of titania hollow spheres has been fabricated. The fabricated process is based on the silica template technique, thermal sintering, and the sol–gel process. The band-structure calculations and optical measurements both indicate that a quasi-full three-dimensional photonic bandgap located at the visible wavelength has been presented between the eighth and ninth bands. This indicates that the non-close-packed structure of titania hollow spheres was easier to open the complete photonic bandgaps than other face-centered cubic structures made by self-assembling methods at the visible region.     

X射线显微CT用于大鼠骨小梁结构分析的研究

应用X射线显微CT(X-μCT)对正常及骨质疏松大鼠的骨小梁结构进行了分析,并与骨组织形态计量法的测量值进行了比较,探讨了X射线光谱技术在骨结构分析中的应用。实验对大鼠骨样品进行X-μCT扫描,扫描条件为 80 kVp,80 μA,360°旋转,帧平均4帧,角度增益 0.4°,分辨率14 μm。三维重建并分析了骨小梁结构,结构参数包括骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)、骨小梁数量(Tb.N)以及骨小梁间隔(Tb.Sp)。结果表明,采用X-μCT分析不同组大鼠的骨小梁结构参数值之间存在显著差异(P<0.05),测定值与传统骨组织形态计量法的测定值显著相关,其中胫骨骨小梁BV/TV,Tb.Th,Tb.N,Tb.Sp的相关系数r分别为0.984,0.960,0.995,0.988,腰椎骨小梁各结构参数的相关系数分别为0.938,0.968,0.877,0.951。因此,X-μCT可以较好地呈现并区分正常骨组织、骨质疏松骨组织以及经雌激素治疗后骨组织的微观结构,可以实现对骨小梁结构参数的分析测定,与骨组织形态计量法相比是一种更精确、立体、快速且无损测量骨微结构和评价骨质量的方法。     

Experimental study on correlation between sound velocity and solute molecular weight in polyethylene glycol solution

In this study,ultrasound grating was used to measure the sound velocity in solutions of ethylene glycol and polyethylene glycol with molecular weights of 200,600,2000,and 10000.We found Parthasarathy empirical rule,that is,sound velocity is higher in the solution of larger molecules,is invalid in the case of polyethylene glycol solution. We tried to provide a tentative explanation using the Flory-Krigbaum's chained block cloud model.     

Dielectrophoretic assembly of ZnO nanowires

The synthesis of zinc oxide （ZnO） nanowires is achieved by vapor phase transportation （VPT） method. The designed quartz tube, whose both ends are narrow and the middle is wider, is used to control the growth of ZnO nanowires. Dielectrophoresis （DEP） method is employed to align and manipulate ZnO nanowires which are ultrasonic dispersed and suspended in ethanol solution. Under the dielectrophoretic force, the nanowires are trapped on the pre-patterned electrodes, and further aligned along the electric field and bridge the electrode gap. The dependence of the alignment yield on the applied voltage and frequency is investigated.     

Characteristics of a dual‐radio‐frequency cylindrical inductively coupled plasma

The plasma parameters such as electron density, effective electron temperature, plasma potential, and uniformity are investigated in a new dual‐frequency cylindrical inductively coupled plasma (ICP) source operating at two frequencies (2 and 13.56 MHz) and two antennas (a two‐turn high‐frequency antenna and a six‐turn low‐frequency (LF) antenna). It is found that the electron density increases with 2 MHz power, whereas the electron temperature and plasma potential decrease with 2 MHz power at a fixed 13.56 MHz power. Moreover, the plasma uniformity can be improved by adjusting the LF power. These results indicate that a dual‐frequency synergistic discharge in a cylindrical ICP can produce a high‐density, low‐potential, low‐effective‐electron‐temperature, and uniform plasma.