高压下聚苯胺的结构和电性能研究

 以金刚石压腔高压装置为工具，用Ⅱ型金刚石作压砧兼红外窗口，对本征态聚苯胺进行了高压（0~8.4 GPa）就位红外光谱测试。结果表明：在4.8~5.2 GPa压力区间，代表醌环振动的吸收峰相对代表苯环振动的吸收峰变小，表明聚苯胺在此压力区间结构上发生了显著变化，且这种变化是不可逆的。聚苯胺的高压（0~14.5 GPa）电阻测量结果表明：当压力小于7.5 GPa时，电阻随压力升高而显著降低，据此认为聚苯胺为电子性导电物质；在7.5 GPa处电阻出现极小值，然后又缓慢升高，至10 GPa后基本不变。推测聚苯胺电阻极小值是由结构变化引起的。至于红外光谱与电阻测量结果反映聚苯胺结构变化的压力值不一致，可能是由于测试条件不同所致。     

Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

A model of JIT make-to-stock inventory with stochastic demand

We consider a firm that manages its internal manufacturing operations according to a just-in-time (JIT) system but maintains an inventory of finished goods as a buffer against random demands from external customers. We formulate a model in which finished goods are replenished by a small fixed quantity each time period. In the interest of schedule stability, the size of the replenishment quantity must remain fixed for a predetermined interval of time periods. We analyse the single-interval problem in depth, showing how to compute a cost-minimising value of the replenishment quantity for a given interval length, and characterising the optimal cost, inventory levels and service as functions of the interval length and initial inventory. The model displays significant cost and service penalties for schedule stability. A dynamic version of the problem is also formulated, and shown to be convex in nature with relatively easily computed optima.     

An Overview of Scheduling Problems Arising in Satellite Communications

Satellite communications, like batches of work in a job shop, need to be scheduled in order to use their resources as efficiently as possible. The most common satellite communications system in use today is known as Time Division Multiple Access (TDMA), in which data from earth stations is buffered before being transmitted to the appropriate receiver on a satellite. Cycles of transmission are fixed for all stations. Since the same satellite will be used for routeing data in several different ways, a schedule must be devised to use the receivers, repeaters and transmitters on board to minimize the time needed for completion of a batch of work. This paper is a survey of current scheduling algorithms used for optimizing satellite communications resources. Apart from telecommunications, the methods presented here could be applied to more general scheduling problems with renewable resources but without precedence constraints.     

Calorimeter energy calibration using the energy conservation law

A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution for the simple calorimeter energy sum.      

A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Electricity price forecasting through transfer function models

Forecasting electricity prices in presentday competitive electricity markets is a must for both producers and consumers because both need price estimates to develop their respective market bidding strategies. This paper proposes a transfer function model to predict electricity prices based on both past electricity prices and demands, and discuss the rationale to build it. The importance of electricity demand information is assessed. Appropriate metrics to appraise prediction quality are identified and used. Realistic and extensive simulations based on data from the PJM Interconnection for year 2003 are conducted. The proposed model is compared with naïve and other techniques.