Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.     

Production, Characterization, and Application of an Organic Solvent-Tolerant Lipase Present in Active Inclusion Bodies

An organic solvent-tolerant lipase from Serratia marcescens ECU1010 (rSML) was overproduced in Escherichia coli in an insoluble form. High concentrations of both biomass (50 g cell wet weight/L culture broth) and inclusion bodies (10.5 g/L) were obtained by applying a high-cell-density cultivation procedure. Activity assays indicated that the enzymatic activity of rSML reached 600 U/L. After treatment with isopropyl ether for 12 h, the maximum lipase activity reached 6,000 U/L. Scanning electron microscopy and Fourier transform infrared microspectroscopy revealed the activation mechanism of rSML in the presence of organic solvents. rSML was stable in broad ranges of temperatures and pH values, as well as in a series of organic solvents. Besides, rSML showed the best enantioselectivity for the kinetic resolution of (±)-trans-3-(4-methoxyphenyl)glycidic acid methyl ester. These features render the S. marcescens ECU1010 lipase attractive for biotechnological applications in the field of organic synthesis and pharmaceutical industry.     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Coral reef-like polyanaline nanotubes prepared by a reactive template of manganese oxide for supercapacitor electrode

Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H₂SO₄ with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.     

Corrosion inhibition of ammonium molybdate for AA6061 alloy in NaCl solution and its synergistic effect with calcium gluconate

The corrosion inhibition of ammonium heltamolybdate (AH) and calcium gluconate (CG) for AA6061 alloy in 3% NaCl solution was investigated by the electrochemical measurements. It indicates that AH inhibits the corrosion of AA6061 alloy and acts as an anodic inhibitor. Maximum inhibition efficiency reaches 74.3% at the concentration of 1 × 10^?4 mol.l^?1 AH. The results of the electrochemical studies reveal AH is physically adsorbed on the AA6061 alloy surface and the adsorption follows Langmuir isotherm. The combination of AH and CG enhances the inhibition efficiency to 95.9%. The enhanced inhibition is attributed to the promotion of AH adsorption by CG. The mixture of AH and CG is a mixed‐type inhibitor and renders the corrosion potential to more positive values. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of Nanosized Silicon Carbide Through Non-Transferred Arc Thermal Plasma

A thermal plasma system was used for the preparation of nanosized SiC powder. First SiC was synthesized by solid-state reaction using waste silicon and activated carbon powders and then plasma processing was carried out to form nanosized SiC. Phase and structural analysis was carried out by X-ray diffraction which confirmed the formation of SiC in both cases. Plasma treatment did not show any kind of change in structure and phase of SiC; except little free silicon. Morphological investigation showed the formation of 20–30 nm spherical SiC particles after plasma treatment which was initially 1–5 μm. It was found that DC current played an important role in the reduction of particle size. It was proposed that nanosized SiC was formed due to the dissociation of grains from their grain boundary due to strong plasma gas stream.     

Synthesis of some novel 5-substituted benzamido-6-arylamino-pyrazolo[3,4-D]pyrimidin-4-one derivatives for herbicidal activity

Abstract

Sixteen novel 3-methylthio-5-substituted benzamido-6-arylamino-1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4 (5H)-one derivatives (4a–p) were successfully synthesized from iminophosphoranes, aryl isocyanate, and substituted benzoylhydrazine. The structures of the title compounds were elucidated by FT-IR, ¹H NMR, ¹³C NMR, and HRMS. Herbicidal activity of the compounds 4a–p against Brassica napus (rape), Echinochloa crusgalli (barnyard grass), Cucumis sativus (cucumber), and Triticum aestivum (wheat) were determined. The results showed that 5-(2-chlorobenzamido)-6-phenylamino-3-methylthio-1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4 (5H)-one (4c) displayed remarkable inhibition activity against the stalk and root of rape with 100% inhibition rate at the dosages of 10?mg/L and 100?mg/L, and 5-(4-nitrobenzamido)-6-phenylamino-3-methylthio-1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4 (5H) -one (4d) exhibited excellent activity against the stalk and root of barnyard grass with 100% inhibition rate at the same dosages.     

Etching Characteristics and Mechanisms of Mo and Al2O3 Thin Films in O2/Cl2/Ar Inductively Coupled Plasmas: Effect of Gas Mixing Ratios

An investigation of etching behaviors for Mo and Al₂O₃ thin films in O₂/Cl₂/Ar inductively coupled plasmas at constant gas pressure (6 mTorr), input power (700 W) and bias power (200 W) was carried out. It was found that an increase in Ar mixing ratio for Cl₂/Ar plasma results in non-monotonic etching rates with the maximums of 160 nm/min at 60 % Ar for Mo and 27 nm/min at 20 % Ar for Al₂O₃. The addition of O₂ in the Cl₂/Ar plasma causes the non-monotonic Mo etching rate (max. 320 nm/min at 40–45 % O₂) while the Al₂O₃ etching rate decreases monotonically. The model-based analysis of etching kinetics allows one to relate the non-monotonic etching rates in Cl₂/Ar plasma to the change in the etching regime from the ion-flux-limited mode (at low Ar mixing ratios) to the neutral-flux-limited mode (for high Ar mixing ratios). In the Cl₂/O₂/Ar plasma, the non-monotonic Mo etching rate is probably due to the change in reaction probability.