Synthesis and thermal properties of novel calix[4]arene derivatives containing 1,2,3-triazole moiety via K2CO3-catalyzed 1,3-dipolar cycloaddition reaction

Two calix[4]arene derivatives containing 1,2,3-triazole moiety were synthesized via K2CO3-catalyzed1,3-dipolar cycloaddition reaction between calix[4]arene-based azide and active methylene compounds in good yields.The structures of the two compounds synthesized herein were fully confirmed by 1HNMR,,（13）C NMR,and MS（ESI）.The thermal analysis showed that the mass losses of the synthesized compounds 4 and 5 containing 1,2,3-triazole groups are similar to each other.     

N2/Ar等离子体改性对CuO/TiO2可见光光催化活性的影响

研究了N2/Ar介质阻挡放电处理对负载CuO的TiO2可见光光催化活性的影响.采用X射线衍射、紫外-可见分光吸收光谱、透射电镜、X射线光电子能谱和电子自旋共振进行了表征,详细考察了等离子改性参数包括气氛组成、处理时间和处理功率对改性效果的影响,并通过降解甲基橙溶液考察了可见光光催化活性.结果表明,最佳等离子处理条件为N2与Ar比例为8:2,处理时间为20 min,放电电流为1.0 A.最后,使用改性后的光催化剂对模拟含汞废水进行了处理.     

Mutation Breeding of Lycopene-Producing Strain Blakeslea Trispora by a Novel Atmospheric and Room Temperature Plasma (ARTP)

To improve the fermentation efficiency of lycopene, a plasma jet, driven by an active helium atom supplied with atmospheric and room temperature plasma (ARTP) biological breeding system, was used as a new method to generate mutations in Blakeslea trispora (?). After several rounds of screening, a mutant A5 with high concentration of lycopene and dry biomass was isolated, which showed a maximum lycopene concentration (26.4?±?0.2 mg/g dry biomass) which was 55 % higher than the parent strain (16.9?±?0.3 mg/g dry biomass) in the production of lycopene. Compared with parent strain, B. trispora A5 required less dissolved oxygen (10 % less than that of parent strain) to reach maximum concentration in a 5-L stirred tank reactor batch fermentation.     

A New α-Galactosidase from Thermoacidophilic Alicyclobacillus sp. A4 with Wide Acceptor Specificity for Transglycosylation

An α-galactosidase gene (gal36A4) of glycosyl hydrolase family 36 was identified in the genome of Alicyclobacillus sp. A4. It contains an ORF of 2,187 bp and encodes a polypeptide of 728 amino acids with a calculated molecular mass of 82.6 kDa. Deduced Gal36A4 shows the typical GH36 organization of three domains—the N-terminal β-sheets, the catalytic (β/α)₈-barrels, and the C-terminal antiparallel β-sheet. The gene product was produced in Escherichia coli and showed both hydrolysis and transglycosylation activities. The optimal pH for hydrolysis activity was 6.0, and a stable pH range of 5.0–11.0 was found. The enzyme had a temperature optimum of 60 °C. It is specific for α-1,6-glycosidic linkages and had a K _m value of 1.45 mM toward pNPGal. When using melibiose as both donor and acceptor of galactose, Gal36A4 showed the transfer ratio of 23.25 % at 96 h. With respect to acceptor specificity, all tested monosaccharides, disaccharides, and oligosaccharides except for D-xylose and L-arabinose were good acceptors for transglycosylation. Thus, Gal36A4 may find diverse applications in industrial fields, especially in the food industry.     

不对称双酸催化吲哚的Friedel-Crafts烷基化反应:抗衡阴离子调控对映选择性

研究了双酸催化剂对吲哚和β,γ-不饱和α-酮酸酯的不对称Friedel-Crafts烷基化反应.金属铟(III)盐和手性磷酸组成的双酸催化体系可以高效、高选择性地催化吲哚与β,γ-不饱和α-酮酸酯的Friedel-Crafts烷基化反应.简单改变铟(III)盐的抗衡阴离子从F-到Br-,就能使产物的构型发生反转,并同时获得相应的高产率(最高达98%)和高对映选择性(最高大于99%)的1,4-加成产物.     

纳米结构钛酸盐电极快速测定水体COD

分析了纳米结构钛酸盐电极快速测定COD的基本原理及COD标准物质定值方法。通过对纳米结构钛酸盐表征分析,钠型钛酸盐电极具有较高的灵敏度,外加0.7 V工作电位,测定COD溶液标准物质的线性相关系数大于0.995,误差在±8%以内;与国标方法比较,测量同一水样的误差在±15%以内。纳米结构钛酸盐电极可用于测量水体COD。     

Pressure-Suppressed Carrier Trapping Leads to Enhanced Emission in Two-Dimensional Perovskite (HA)2(GA)Pb2I7

A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA)₂(GA)Pb₂I₇ (HA=n-hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non-luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above-band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two-fold higher PL emission compared with the pristine (HA)₂(GA)Pb₂I₇.     

Rational Design of the Metal-Free KBe2BO3F2⋅(KBBF) Family Member C(NH2)3SO3F with Ultraviolet Optical Nonlinearity

The first fluorosulfonic ultraviolet (UV) nonlinear optical (NLO) material, C(NH₂)₃SO₃F, is rationally designed by taking KBe₂BO₃F₂ (KBBF) as the parent compound. C(NH₂)₃SO₃F features similar topological layers as KBBF by replacing inorganic (BO₃)³⁻ with organic C(NH₂)₃⁺ trigonal units and BeO₃F with SO₃F⁻ tetrahedra. Therefore, C(NH₂)₃SO₃F is a metal-free UV NLO crystal. Benefiting from the coplanar configuration of the C(NH₂)₃⁺ cationic groups, it possesses a large SHG response of 5×KDP and moderate birefringence of 0.133@1064 nm. Besides, it has a short UV cutoff edge of 200 nm. The calculated results reveal the shortest SHG phase-matching wavelengths can reach 200 nm. These findings highlight the exploration of metal-free compounds as nontoxic and low-cost UV NLO materials as a new research area.     

A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells

A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >10⁵ cm⁻¹, a high LUMO level of −3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.     

Utilizing a Photocatalysis Process to Achieve a Cathode with Low Charging Overpotential and High Cycling Durability for a Li-O2 Battery

The practical applications of non-aqueous lithium-oxygen batteries are impeded by large overpotentials and unsatisfactory cycling durability. Reported here is that commonly encountered fatal problems can be efficiently solved by using a carbon- and binder-free electrode of titanium coated with TiO₂ nanotube arrays (TNAs) and gold nanoparticles (AuNPs). Ultraviolet irradiation of the TNAs generates positively charged holes, which efficiently decompose Li₂O₂ and Li₂CO₃ during recharging, thereby reducing the overpotential to one that is near the equilibrium potential for Li₂O₂ formation. The AuNPs promote Li₂O₂ formation, resulting in a large discharge capacity. The electrode exhibits excellent stability with about 100 % coulombic efficiency during continuous cycling of up to 200 cycles, which is due to the carbon- and binder-free composition. This work reveals a new strategy towards the development of highly efficient oxygen electrode materials for lithium-oxygen batteries.