The study of a single BGC823 cell using Fourier transform infrared microspectroscopic imaging

In order to investigate gastric cancer at cellular and sub-cellular level, a single human gastric adenocarcinoma BGC823 cell was studied by an infrared microscope equipped with a focal plane array (FPA) detector. The spectra showed difference between the nucleus and the endoplasmic reticulum (ER) of the BGC823 cell. The peak of vasPO2- was shifted to a higher wavenumber at the nucleus compared with that at the ER. The height ratios of 2954 cm(-1)/2922 cm(-1) (CH3/CH2) and 1088 cm(-1)/1539 cm(-1) (DNA/amide II) of the nucleus were significantly higher than those of the ER. Furthermore, chemical images reveal the intensity distributions of lipids, proteins and DNA of the single BGC823 cell, and the intense absorptions of proteins and DNA were observed in the nuclear region of the cell while the intense absorption of lipids was found in the ER region of the cell. The Fourier transform infrared (FTIR) microspectroscopic imaging result indicates the study of the single gastric cancer cell at sub-cellular level can be beneficial for knowing gastric cancer more which will be of great importance for the study and diagnosis of gastric cancer. The result also suggests that FPA is a useful tool in the study of a single cell and may be a powerful tool for study and diagnosis of gastric cancer.     

PdH2、YH2分子的结构与势能函数

用密度泛函理论的B3LYP方法,对钯和钇原子采用SDD收缩价基函数,氢原子采用6-311＋＋G**全电子基函数,对PdH2和YH2体系的结构进行优化计算,得到PdH2分子最稳态为C2v构型,电子组态为1A1,平衡核间距RPdH=0.1692 nm,键角∠HPdH=29.4°,离解能De=5.5212 eV,基态简正振动频率:ν1(b2)=1470.1 cm－1、ν2(a1)=1007.9 cm－1、ν3(a1)=2907.0 cm－1.YH2分子最稳态也为C2v构型,电子组态2A1,RYH=0.1962 nm,∠HYH=114.3°,De=5.6691 eV,基态简正振动频率:ν1(b2)=1457.9 cm－1、ν2(a1)=476.0 cm－1、ν3(a1)=1506.3 cm－1.由微观过程的可逆性原理分析了分子的可能离解极限.并用多体项展式理论方法分别导出基态PdH2和YH2分子的势能函数,其等值势能面图准确地再现了PdH2和YH2分子的结构特征和离解能,由此讨论了Pd ＋ H2和Y ＋ H2分子反应的势能面静态特征.     

斜波导喇曼振荡器

 采用斜波导的喇曼氢气池, 使泵浦激光束在波导内部传播, 增大了受激喇曼散射的作用区域。在传播过程中光束截面逐渐被压缩, 补偿因波导内壁的反射损耗而引起的功率密度下降。在一定气压范围内提高了喇曼转换的效率, 并利用波导对激光束的均匀作用, 使输出的一阶斯托克斯光光强的均匀性获得改善。     

耐硫催化剂上合成混合醇的研究

通过改进制备方法和添加助剂，用浸渍－热分解法制得了具有高活性和高选择性的MoS2-K-C型耐硫低碳混合醇催化剂。在8.0-11.0MPa,290-340℃，6000-12000h^-1,H2 S 浓度为100ppm 左右的条件下，在直流反应器中对催化剂进行了性能测试，结果表明，醇得率为0.14-0.47gROH(gcat·h)^-1，选择性为89-98%。同时，考察了操作条件对催化剂性能的影响。1042h的试验，证明催化剂具有很好的稳定性。     

Spontaneous Ga incorporation in ZnO nanowires epitaxially grown on GaN substrate

Surface‐diffusion‐induced spontaneous Ga incorporation process is demonstrated in ZnO nanowires grown on GaN substrate. Crucially, contrasting distributions of Ga atoms in axial and radial directions are experimentally observed. Ga atoms uniformly distribute along the ～10 μm long ZnO nanowire and show a rapidly gradient distribution in the radial direction, which is attributed substantially to the difference between surface and volume diffusion. The understanding on the incorporation process can potentially modulate doping and properties in semiconductor nanomaterials.

     

FeSi2合金在高压下的凝固

研究了压力对FeSi2合金凝固组织的影响.与常压下凝固的典型共晶组织不同，高压条件下的凝固组织为初生ε相树枝晶加离异共晶.高压下凝固组织的变化主要是与压力对相图的影响和对凝固过程中溶质原子扩散的影响有关.通过引入压力参量，推导了高压凝固过程中的成分过冷判据，并应用该判据分析了高压凝固树枝晶组织的形成机理. 关键词： 高压 凝固 FeSi2     

Fe掺杂量对双层复合结构BaTi1-zFezO3+δ-Tb1-xDyxFe2-y中磁电耦合的影响

采用溶胶凝胶方法制备了Fe掺杂钛酸钡多晶系列陶瓷BaTi_1-zFe_zO_3+δ(0.005≤z≤0.02) (BTFO).X射线衍射实验显示,所制备的BTFO的结构仍然为四方相钙钛矿.差热分析表明,该BTFO样品的铁电-顺电转变温度及相变潜热随掺杂量z的增加而下降.将该BTFO极化后与Tb_1-xDy_xF 关键词： 磁电耦合 掺杂效应 掺杂钛酸钡     

Cu(I)-catalyzed highly exo-selective and enantioselective [3 + 2] cycloaddition of azomethine ylides with acrylates

[reaction: see text] A novel Cu(I)-catalyzed asymmetric 1,3-dipolar cycloaddition of azomethine ylides with acrylates has been developed. Up to 98/2 exo/endo selectivity and up to 98% enantiomeric excess have been achieved.     

矩阵方程X-A~*X~qA=Q(q>0)的Hermite正定解

本文讨论了矩阵方程X-A*XqA=Q(q>0)的Hermite正定解,给出了q>1时解存在的必要条件,存在区间,以及迭代求解的方法．证明了0相似文献   

飞秒激光加工蓝宝石超衍射纳米结构

蓝宝石具有超强硬度及耐腐蚀、耐高温、在紫外-红外波段具有良好的透光性等优点,在军工业以及医疗器械方面具有广泛的应用前景.然而这些优点又对蓝宝石的机械加工或化学腐蚀加工带来困难.飞秒激光脉冲具有热损伤小、加工分辨率高、材料选择广等特点,被广泛应用于固体材料改性和高精度三维微纳器件加工.本文提出了利用飞秒激光多光子吸收特性在蓝宝石表面实现超越光学衍射极限的精细加工.利用聚焦后的波长为343 nm的飞秒激光,配合高精密三维压电位移台,实现激光焦点和蓝宝石晶体的相对三维移动,在蓝宝石晶体衬底上进行精确扫描,得到了线宽约61 nm的纳米线,纳米线间的最小间距达到142 nm左右.利用等离子体模型解释了加工得到的纳米条纹的产生原因,研究了激光功率、扫描速度对加工分辨率的影响.最终本工作实现了超越光学衍射极限的加工精度,为实现利用飞秒激光对高硬度材料的微纳结构制备提供了参考.